Re: [PATCH 3/3] OMAP3: PM: invoke omap_sram_idle() only when sleep_while_idle is enabled

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Kim Kyuwon <chammoru@xxxxxxxxx> writes:

> If MPU goes to WFI in the idle thread, execution time becomes a bit
> slow and the JTAG Debugger doesn't work. This patch is needed for
> urgent works(e.g. booting and launching application) and debugging.

Kim,

Do you still need this patch when using the new lower-latency C1-state
patch from Peter which I recently applied to the PM branch?

With that patch, MPU and CORE stay ON, and the clkdomain is not allowed
to idle so that the latency for C1 is on the order of a few usecs.

Kevin

> To enable sleep_while_idle mode, use below setting.
> echo 1 > /sys/power/sleep_while_idle
>
> Signed-off-by: Kim Kyuwon <q1.kim@xxxxxxxxxxx>
> ---
>  arch/arm/mach-omap2/cpuidle34xx.c |    3 +++
>  arch/arm/mach-omap2/pm34xx.c      |    5 +++--
>  2 files changed, 6 insertions(+), 2 deletions(-)
>
> diff --git a/arch/arm/mach-omap2/cpuidle34xx.c
> b/arch/arm/mach-omap2/cpuidle34xx.c
> index 630108c..1623c2f 100644
> --- a/arch/arm/mach-omap2/cpuidle34xx.c
> +++ b/arch/arm/mach-omap2/cpuidle34xx.c
> @@ -87,6 +87,9 @@ static int omap3_enter_idle(struct cpuidle_device *dev,
>  	local_irq_disable();
>  	local_fiq_disable();
>
> +	if (!enable_dyn_sleep)
> +		goto return_sleep_time;
> +
>  	if (!enable_off_mode) {
>  		if (mpu_state < PWRDM_POWER_RET)
>  			mpu_state = PWRDM_POWER_RET;
> diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c
> index 9102cee..402409c 100644
> --- a/arch/arm/mach-omap2/pm34xx.c
> +++ b/arch/arm/mach-omap2/pm34xx.c
> @@ -484,8 +484,6 @@ static int omap3_fclks_active(void)
>
>  int omap3_can_sleep(void)
>  {
> -	if (!enable_dyn_sleep)
> -		return 0;
>  	if (!omap_uart_can_sleep())
>  		return 0;
>  	if (omap3_fclks_active())
> @@ -545,6 +543,9 @@ static void omap3_pm_idle(void)
>  	local_irq_disable();
>  	local_fiq_disable();
>
> +	if (!enable_dyn_sleep)
> +		goto out;
> +
>  	if (!omap3_can_sleep())
>  		goto out;
>
> -- 
> 1.5.2.5
>
>
> -- 
> Kyuwon
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Linux Arm (vger)]     [ARM Kernel]     [ARM MSM]     [Linux Tegra]     [Linux WPAN Networking]     [Linux Wireless Networking]     [Maemo Users]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Trails]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux