Copy over the reset data from hwmod database to DT. After this is taken
into use, the data in hwmod database can be removed.
A new node has been also added for sad2d to support sad2d resets.
Signed-off-by: Tero Kristo <t-kristo@xxxxxx>
---
arch/arm/boot/dts/omap3.dtsi | 21 +++++++++++++++++++++
1 file changed, 21 insertions(+)
diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi
index 69a40cf..5be9aaa 100644
--- a/arch/arm/boot/dts/omap3.dtsi
+++ b/arch/arm/boot/dts/omap3.dtsi
@@ -64,11 +64,23 @@
iva: iva {
compatible = "ti,iva2.2";
ti,hwmods = "iva";
+ reset-names = "logic", "seq0", "seq1";
+ resets = <&prm 0x0000 0 0 0 8>,
+ <&prm 0x0000 0 1 0 9>,
+ <&prm 0x0000 0 2 0 10>;
dsp {
compatible = "ti,omap3-c64";
};
};
+
+ sad2d: sad2d {
+ compatible = "ti,sad2d";
+ ti,hwmods = "sad2d";
+ reset-names = "rst_modem_sw", "rst_modem_pwron_sw";
+ resets = <&prm 0x0a00 0 0 0 8>,
+ <&prm 0x0a00 0 1 0 9>;
+ };
};
/*
@@ -154,6 +166,7 @@
compatible = "ti,omap3-prm";
reg = <0x48306000 0x4000>;
interrupts = <11>;
+ #reset-cells = <5>;
prm_clocks: clocks {
#address-cells = <1>;
@@ -162,6 +175,12 @@
prm_clockdomains: clockdomains {
};
+
+ system_reset: system_reset {
+ compatible = "ti,system-reset";
+ reset-names = "system";
+ resets = <&prm 0x1200 0 2 0 0>;
+ };
};
cm: cm@48004000 {
@@ -471,6 +490,8 @@
interrupts = <28>;
ti,hwmods = "mmu_iva";
status = "disabled";
+ reset-names = "mmu";
+ resets = <&prm 0x0000 0 1 0 9>;
};
wdt2: wdt@48314000 {
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
