On the OMAP AM3517 platform the uart4_ick gets registered
twice, causing any power managment to /dev/ttyO3 to fail
when trying to wake the device up.
This solves the following oops:
[] Unhandled fault: external abort on non-linefetch (0x1028) at 0xfa09e008
[] PC is at serial_omap_pm+0x48/0x15c
[] LR is at _raw_spin_unlock_irqrestore+0x30/0x5c
Signed-off-by: Ben Dooks <ben.dooks@xxxxxxxxxxxxxxx>
---
drivers/clk/ti/clk-3xxx.c | 1 -
1 file changed, 1 deletion(-)
diff --git a/drivers/clk/ti/clk-3xxx.c b/drivers/clk/ti/clk-3xxx.c
index 5e12f32..2e7ef1f 100644
--- a/drivers/clk/ti/clk-3xxx.c
+++ b/drivers/clk/ti/clk-3xxx.c
@@ -374,7 +374,6 @@ static struct ti_dt_clk omap3xxx_clks[] = {
DT_CLK(NULL, "gpio2_ick", "gpio2_ick"),
DT_CLK(NULL, "wdt3_ick", "wdt3_ick"),
DT_CLK(NULL, "uart3_ick", "uart3_ick"),
- DT_CLK(NULL, "uart4_ick", "uart4_ick"),
DT_CLK(NULL, "gpt9_ick", "gpt9_ick"),
DT_CLK(NULL, "gpt8_ick", "gpt8_ick"),
DT_CLK(NULL, "gpt7_ick", "gpt7_ick"),
--
2.5.1
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
