On 2015-09-15 02:24, Tony Lindgren wrote: > * Carl Frederik Werner <frederik@xxxxxxx> [150901 18:18]: >> Let's fix pinmux address of gpio 170 used by tfp410 powerdown-gpio. >> >> According to the OMAP35x Technical Reference Manual >> CONTROL_PADCONF_I2C3_SDA[15:0] 0x480021C4 mode0: i2c3_sda >> CONTROL_PADCONF_I2C3_SDA[31:16] 0x480021C4 mode4: gpio_170 >> the pinmux address of gpio 170 must be 0x480021C6. >> >> The former wrong address broke i2c3 (used by hdmi ddc), resulting in >> kernel message: >> omap_i2c 48060000.i2c: controller timed out >> >> Signed-off-by: Carl Frederik Werner <frederik@xxxxxxx> > > Thanks applying into omap-for-v4.3/fixes with cc stable v3.15+. > Good to see issues like this to get fixed. > > Regards, > > Tony Thanks, it was pleasure to support! Best regards, Frederik > >> --- >> arch/arm/boot/dts/omap3-beagle.dts | 2 +- >> 1 file changed, 1 insertion(+), 1 deletion(-) >> >> diff --git a/arch/arm/boot/dts/omap3-beagle.dts b/arch/arm/boot/dts/omap3-beagle.dts >> index fd792a4..18b178b 100644 >> --- a/arch/arm/boot/dts/omap3-beagle.dts >> +++ b/arch/arm/boot/dts/omap3-beagle.dts >> @@ -202,7 +202,7 @@ >> >> tfp410_pins: pinmux_tfp410_pins { >> pinctrl-single,pins = < >> - 0x194 (PIN_OUTPUT | MUX_MODE4) /* hdq_sio.gpio_170 */ >> + 0x196 (PIN_OUTPUT | MUX_MODE4) /* hdq_sio.gpio_170 */ >> >; >> }; >> >> -- >> 2.5.1 >> >> -- >> To unsubscribe from this list: send the line "unsubscribe linux-omap" in >> the body of a message to majordomo@xxxxxxxxxxxxxxx >> More majordomo info at http://vger.kernel.org/majordomo-info.html >> -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html