On Sun, Mar 15, 2009 at 12:56 PM, Steve Sakoman <sakoman@xxxxxxxxx> wrote: > On Sat, Mar 14, 2009 at 7:00 PM, David Brownell <david-b@xxxxxxxxxxx> wrote: > >> Works for me, and I think you've got all the patches that >> should matter. This is against today's GIT, yes? >> Does taking #3 away help? > > I'm not sure why it is working for you! Perhaps you have some patches > that aren't included in the current tree? > > I believe the root issue is in your recent Overo patch > (http://marc.info/?l=linux-omap&m=123679791627030&w=2) > > In particular, these lines: > > + /* gpio + 0 is "mmc0_cd" (input/IRQ) */ > + mmc[0].gpio_cd = gpio + 0; > > Overo, having a microSD slot, doesn't have a card detect switch. The > other part of your patch sets gpio_cd properly: > > +static struct twl4030_hsmmc_info mmc[] = { > + { > + .mmc = 1, > + .wires = 4, > + .gpio_cd = -EINVAL, > + .gpio_wp = -EINVAL, > + }, > + { > + .mmc = 2, > + .wires = 4, > + .gpio_cd = -EINVAL, > + .gpio_wp = -EINVAL, > + .transceiver = true, > + .ocr_mask = 0x00100000, /* 3.3V */ > + }, > + {} /* Terminator */ > +}; > > So all I had to do was remove the above 2 lines to get a successful boot. I spoke a little too soon :-) The above fix does get me past the mmc issue, and everything looks fine from the serial console. But I just noticed that DVI is broken -- I suspect that some regulator magic may be required in the video driver too :-( Steve -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
