On 05/08/15 17:18, Kishon Vijay Abraham I wrote:
> Hi Roger,
>
> On Wednesday 05 August 2015 01:55 PM, Roger Quadros wrote:
>> On 05/08/15 11:23, Roger Quadros wrote:
>>>
>>> On 04/08/15 18:20, Kishon Vijay Abraham I wrote:
>>>> The USB2 PHY2 has a different register map compared to USB2 PHY1
>>>> to power on/off the PHY. In order to handle it, add a new
>>>> "compatible" string.
>>>>
>>>> Signed-off-by: Kishon Vijay Abraham I <kishon@xxxxxx>
>>>> ---
>>>> Documentation/devicetree/bindings/phy/ti-phy.txt | 2 ++
>>>> drivers/phy/phy-omap-usb2.c | 9 +++++++++
>>>> 2 files changed, 11 insertions(+)
>>>>
>>>> diff --git a/Documentation/devicetree/bindings/phy/ti-phy.txt b/Documentation/devicetree/bindings/phy/ti-phy.txt
>>>> index 49e5b0c..a061077 100644
>>>> --- a/Documentation/devicetree/bindings/phy/ti-phy.txt
>>>> +++ b/Documentation/devicetree/bindings/phy/ti-phy.txt
>>>> @@ -31,6 +31,8 @@ OMAP USB2 PHY
>>>>
>>>> Required properties:
>>>> - compatible: Should be "ti,omap-usb2"
>>>> + Should be "ti,dra7x-usb2-phy2" for the 2nd instance of USB2 PHY
>>>> + in DRA7x
>>>> - reg : Address and length of the register set for the device.
>>>> - #phy-cells: determine the number of cells that should be given in the
>>>> phandle while referencing this phy.
>>>> diff --git a/drivers/phy/phy-omap-usb2.c b/drivers/phy/phy-omap-usb2.c
>>>> index b5c266a..2f7220f 100644
>>>> --- a/drivers/phy/phy-omap-usb2.c
>>>> +++ b/drivers/phy/phy-omap-usb2.c
>>>> @@ -159,6 +159,11 @@ static const struct usb_phy_data dra7x_usb2_data = {
>>>> .flags = OMAP_USB2_CALIBRATE_FALSE_DISCONNECT,
>>>> };
>>>>
>>>> +static const struct usb_phy_data dra7x_usb2_phy2_data = {
>>>> + .label = "dra7x_usb2_phy2",
>>>> + .flags = OMAP_USB2_CALIBRATE_FALSE_DISCONNECT,
>>>> +};
>>>> +
>>>> static const struct usb_phy_data am437x_usb2_data = {
>>>> .label = "am437x_usb2",
>>>> .flags = 0,
>>>> @@ -178,6 +183,10 @@ static const struct of_device_id omap_usb2_id_table[] = {
>>>> .data = &dra7x_usb2_data,
>>>> },
>>>> {
>>>> + .compatible = "ti,dra7x-usb2-phy2",
>>>> + .data = &dra7x_usb2_phy2_data,
>>>
>>> Why is this needed? You can reuse dra7x_usb2_data as is.
>>
>> OK. I see why we need it in the next patch.
>> Probably both patches could be squashed.
>>
>> What does .label indicate?
>
> it's actually used only in usb_add_phy() (drivers/usb/phy/phy.c). I don't think
> it's actually important unless you strongly feel so.
I leave it to you then :).
cheers,
-roger
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
