Hi,
This actually slipped through my review. IMHO madc should be
accessed through IIO, as already done for twl4030-madc-battery
and rx51-battery. That way the custom API can be removed at
some point.
Anyway, I queued the below patch with Tony's ACK to fix the build
issue in next.
On Fri, Aug 07, 2015 at 01:45:25PM +1000, NeilBrown wrote:
> From: NeilBrown <neil@xxxxxxxxxx>
> Date: Fri, 7 Aug 2015 13:44:37 +1000
> Subject: [PATCH] twl4030_charger: fix compile error when TWL4030_MADC not
> available.
>
> We can only use the madc to check for 'ac' availability
> if the madc has been compiled in.
> If not: assume always using USB.
>
> Reported-by: Tony Lindgren <tony@xxxxxxxxxxx>
> Signed-off-by: NeilBrown <neil@xxxxxxxxxx>
>
> diff --git a/drivers/power/twl4030_charger.c b/drivers/power/twl4030_charger.c
> index c7432f532a83..265fd236f4c0 100644
> --- a/drivers/power/twl4030_charger.c
> +++ b/drivers/power/twl4030_charger.c
> @@ -91,6 +91,21 @@
> #define TWL4030_MSTATEC_COMPLETE1 0x0b
> #define TWL4030_MSTATEC_COMPLETE4 0x0e
>
> +#if IS_ENABLED(CONFIG_TWL4030_MADC)
> +/*
> + * If AC (Accessory Charger) voltage exceeds 4.5V (MADC 11)
> + * then AC is available.
> + */
> +static inline int ac_available(void)
> +{
> + return twl4030_get_madc_conversion(11) > 4500;
> +}
> +#else
> +static inline int ac_available(void)
> +{
> + return 0;
> +}
> +#endif
> static bool allow_usb;
> module_param(allow_usb, bool, 0644);
> MODULE_PARM_DESC(allow_usb, "Allow USB charge drawing default current");
> @@ -263,7 +278,7 @@ static int twl4030_charger_update_current(struct twl4030_bci *bci)
> * If AC (Accessory Charger) voltage exceeds 4.5V (MADC 11)
> * and AC is enabled, set current for 'ac'
> */
> - if (twl4030_get_madc_conversion(11) > 4500) {
> + if (ac_available()) {
> cur = bci->ac_cur;
> bci->ac_is_active = true;
> } else {
-- Sebastian
Attachment:
signature.asc
Description: Digital signature
