Hi, The device present on Zoom2 is an eMMC. I have seen some issues with respect to eMMC on the Zoom2 platforms. I have seen the below error some times. But mostly the reads worked fine and the device was recognized but any write attempt to card used to generate DATA CRC errors. I have tested an iNAND device on an other platform with the same driver. That device seems to work fine though. Regards, Madhu -----Original Message----- From: Pandita, Vikram [mailto:vikram.pandita@xxxxxx] Sent: Friday, March 13, 2009 7:39 AM To: Kandasamy, ShankarGanesh; linux-omap@xxxxxxxxxxxxxxx; Chikkature Rajashekar, Madhusudhan Subject: RE: iNAND on ZOOM2 Madhu Can you comment on your experience with EMMC. >-----Original Message----- >From: linux-omap-owner@xxxxxxxxxxxxxxx [mailto:linux-omap-owner@xxxxxxxxxxxxxxx] On Behalf Of >Kandasamy, ShankarGanesh >Sent: Friday, March 13, 2009 7:37 AM >To: linux-omap@xxxxxxxxxxxxxxx >Subject: iNAND on ZOOM2 > >Hi all, >I am trying to access iNAND on ZOOM2 . I enabled MMC2 on kernel Config. Still, i am not able to >access iNAND. , getting error -110 whilst initializing MMC >Can anyone guide me how to enable access for iNAND on MDK-II platforms ? > >mmc0: host does not support reading read-only switch. assuming write-enable. >mmc0: new high speed SD card at address a9e9 >mmcblk0: mmc0:a9e9 SD02G 1966080KiB > mmcblk0: p1 p2 >mmc1: error -110 whilst initialising MMC card >EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended > > >PS : Kernel created from latest branch of http://git.omapzoom.org/repo/omapkernel.git > > >With Thanks & Regards , >ShankarGanesh >CSST Team-- >To unsubscribe from this list: send the line "unsubscribe linux-omap" in >the body of a message to majordomo@xxxxxxxxxxxxxxx >More majordomo info at http://vger.kernel.org/majordomo-info.html -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
