Add "ti,dra742-uart" to the compatible list so the driver workaround for UART module disable errata is enabled. This does not break backward compatibility as existing DTBs should continue to work with newer kernels albeit without the capability to idle the UART module when DMA is used. Acked-by: Tony Lindgren <tony@xxxxxxxxxxx> Signed-off-by: Sekhar Nori <nsekhar@xxxxxx> --- Earlier sent as part of the series: http://www.spinics.net/lists/linux-omap/msg120005.html resending for applying through tty tree with Tony's ack included. arch/arm/boot/dts/dra7.dtsi | 20 ++++++++++---------- 1 file changed, 10 insertions(+), 10 deletions(-) diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi index 8f1e25bcecbd..49940e516f0f 100644 --- a/arch/arm/boot/dts/dra7.dtsi +++ b/arch/arm/boot/dts/dra7.dtsi @@ -397,7 +397,7 @@ }; uart1: serial@4806a000 { - compatible = "ti,omap4-uart"; + compatible = "ti,dra742-uart", "ti,omap4-uart"; reg = <0x4806a000 0x100>; interrupts-extended = <&crossbar_mpu GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "uart1"; @@ -408,7 +408,7 @@ }; uart2: serial@4806c000 { - compatible = "ti,omap4-uart"; + compatible = "ti,dra742-uart", "ti,omap4-uart"; reg = <0x4806c000 0x100>; interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "uart2"; @@ -419,7 +419,7 @@ }; uart3: serial@48020000 { - compatible = "ti,omap4-uart"; + compatible = "ti,dra742-uart", "ti,omap4-uart"; reg = <0x48020000 0x100>; interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "uart3"; @@ -430,7 +430,7 @@ }; uart4: serial@4806e000 { - compatible = "ti,omap4-uart"; + compatible = "ti,dra742-uart", "ti,omap4-uart"; reg = <0x4806e000 0x100>; interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "uart4"; @@ -441,7 +441,7 @@ }; uart5: serial@48066000 { - compatible = "ti,omap4-uart"; + compatible = "ti,dra742-uart", "ti,omap4-uart"; reg = <0x48066000 0x100>; interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "uart5"; @@ -452,7 +452,7 @@ }; uart6: serial@48068000 { - compatible = "ti,omap4-uart"; + compatible = "ti,dra742-uart", "ti,omap4-uart"; reg = <0x48068000 0x100>; interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "uart6"; @@ -463,7 +463,7 @@ }; uart7: serial@48420000 { - compatible = "ti,omap4-uart"; + compatible = "ti,dra742-uart", "ti,omap4-uart"; reg = <0x48420000 0x100>; interrupts = <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "uart7"; @@ -472,7 +472,7 @@ }; uart8: serial@48422000 { - compatible = "ti,omap4-uart"; + compatible = "ti,dra742-uart", "ti,omap4-uart"; reg = <0x48422000 0x100>; interrupts = <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "uart8"; @@ -481,7 +481,7 @@ }; uart9: serial@48424000 { - compatible = "ti,omap4-uart"; + compatible = "ti,dra742-uart", "ti,omap4-uart"; reg = <0x48424000 0x100>; interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "uart9"; @@ -490,7 +490,7 @@ }; uart10: serial@4ae2b000 { - compatible = "ti,omap4-uart"; + compatible = "ti,dra742-uart", "ti,omap4-uart"; reg = <0x4ae2b000 0x100>; interrupts = <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "uart10"; -- 2.4.4.408.g16da57c -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
