Hi! > > > So, Pavel can you re-test? Maybe there can be problem with some driver > > > which Tony did not compiled into zImage? Just speculation... > > > > I re-tested with today's git, and it seems to boot. Thanks for help... > > OK good to hear. > > > Now. "echo mem > /sys/power/state" is broken, as in "returns > > immediately in about 50% cases". The messages are > > > > Powerdomain (per_pwrdm) didn't enter target state 1 > > Powerdomain (core_pwerdm) didn't enter target state 1 > > > > Any ideas? Thanks, > > Works for me after enabling the idle timeouts with the following > script and blanking the screen and disconnecting USB: > > Also both keyboard LEDs should start blinking after the idle > timeout with screen blanked and USB disconnected. If not, you > have some module loaded that blocks the deeper idle states. Ok, tried that, I had to do: cd /sys/class/gpio echo 162 > export cd gpio162 echo out > direction echo 1 > value to get the debug lights to work. But I could not get those leds to blink. > modprobe leds-gpio > modprobe ledtrig-default-on Is this actually neccessary/relevant? > echo 255 > /sys/class/backlight/acx565akm/brightness And this? Thanks, Pavel -- (english) http://www.livejournal.com/~pavelmachek (cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
