Hello, adding linux-iio... > To get a chance of this patch being considered for inclusion, you > should send this to the maintainers of the phy and iio framework. > There is a high chance, that none of them will see your mail. > > On Thu, Jul 16, 2015 at 03:20:27PM -0700, Adam YH Lee wrote: > > MADC[3:6] reads incorrect values without these two following changes: > > uhm MADC[3:6] are externally available analog inputs. Your > change will result in them being tied to the USB module. change regarding TWL4030_USB_SEL_MADC_MCPC is necessary at least for some hardware revisions to get proper ADC values > > - enable the 3v1 bias regulator for ADC[3:6] > > The regulator is not required for correct MADC functionality, but > for correct USB measureing. The regulator should not be requested > by the madc module, but by the usb module, which is connected to > the madc. in my experience, the MADC exhibits several strange things, I wouldn't be surprised that this bias is somehow necessary for operation even if it is not what the spec says -- has this been tested? > > - configure ADC[3:6] lines as input, not as USB > > I don't think that should be done for all boards. > > > [...] > > -- Sebastian > -- Peter Meerwald +43-664-2444418 (mobile) -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
