On Wed, Jul 15, 2015 at 02:13:28PM +0200, Sebastian Reichel wrote:
> Convert driver to descriptor based GPIO API. Also
> fix the after-probe reset GPIO state, so that the
> device is not kept in reset state.
>
> Signed-off-by: Sebastian Reichel <sre@xxxxxxxxxx>
> ---
> drivers/input/touchscreen/tsc2005.c | 25 ++++++++-----------------
> 1 file changed, 8 insertions(+), 17 deletions(-)
>
> diff --git a/drivers/input/touchscreen/tsc2005.c b/drivers/input/touchscreen/tsc2005.c
> index 83508d8..cb08dc8 100644
> --- a/drivers/input/touchscreen/tsc2005.c
> +++ b/drivers/input/touchscreen/tsc2005.c
> @@ -30,11 +30,11 @@
> #include <linux/delay.h>
> #include <linux/pm.h>
> #include <linux/of.h>
> -#include <linux/of_gpio.h>
> #include <linux/spi/spi.h>
> #include <linux/spi/tsc2005.h>
> #include <linux/regulator/consumer.h>
> #include <linux/regmap.h>
> +#include <linux/gpio/consumer.h>
>
> /*
> * The touchscreen interface operates as follows:
> @@ -179,7 +179,7 @@ struct tsc2005 {
>
> struct regulator *vio;
>
> - int reset_gpio;
> + struct gpio_desc *reset_gpio;
> void (*set_reset)(bool enable);
> };
>
> @@ -317,8 +317,8 @@ static void tsc2005_stop_scan(struct tsc2005 *ts)
>
> static void tsc2005_set_reset(struct tsc2005 *ts, bool enable)
> {
> - if (ts->reset_gpio >= 0)
> - gpio_set_value(ts->reset_gpio, enable);
> + if (ts->reset_gpio)
> + gpiod_set_value_cansleep(ts->reset_gpio, enable);
> else if (ts->set_reset)
> ts->set_reset(enable);
> }
> @@ -611,19 +611,11 @@ static int tsc2005_probe(struct spi_device *spi)
> ts->esd_timeout = esd_timeout;
>
> if (np) {
> - ts->reset_gpio = of_get_named_gpio(np, "reset-gpios", 0);
> - if (ts->reset_gpio == -EPROBE_DEFER)
> - return ts->reset_gpio;
> - if (ts->reset_gpio < 0) {
> + ts->reset_gpio = devm_gpiod_get(&spi->dev, "reset",
> + GPIOD_OUT_HIGH);
I think we should treat the gpio as optional and try to get the
descriptor event on non-OF boards.
> + if (IS_ERR(ts->reset_gpio)) {
> + error = PTR_ERR(ts->reset_gpio);
> dev_err(&spi->dev, "error acquiring reset gpio: %d\n",
> - ts->reset_gpio);
> - return ts->reset_gpio;
> - }
> -
> - error = devm_gpio_request_one(&spi->dev, ts->reset_gpio, 0,
> - "reset-gpios");
> - if (error) {
> - dev_err(&spi->dev, "error requesting reset gpio: %d\n",
> error);
> return error;
> }
> @@ -635,7 +627,6 @@ static int tsc2005_probe(struct spi_device *spi)
> return error;
> }
> } else {
> - ts->reset_gpio = -1;
> ts->set_reset = pdata->set_reset;
> }
>
> --
> 2.1.4
>
Thanks.
--
Dmitry
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
