From: Paul Walmsley <paul@xxxxxxxxx>
During _omap3_noncore_dpll_lock(), if a DPLL has no active downstream
clocks and DPLL autoidle is enabled, the DPLL may never lock, since it
will enter autoidle immediately. To resolve this, disable DPLL
autoidle while locking the DPLL, and unconditionally wait for the DPLL
to lock. This fixes some bugs where the kernel would hang when returning
from retention or return the wrong rate for the DPLL.
This patch is a collaboration with Peter de Schrijver
<peter.de-schrijver@xxxxxxxxx> and Kevin Hilman
<khilman@xxxxxxxxxxxxxxxxxxx>.
linux-omap source commit is 3b7de4be879f1f4f55ae59882a5cbd80f6dcf0f0.
Signed-off-by: Paul Walmsley <paul@xxxxxxxxx>
Cc: Peter de Schrijver <peter.de-schrijver@xxxxxxxxx>
Cc: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
Signed-off-by: Tony Lindgren <tony@xxxxxxxxxxx>
Signed-off-by: Russell King <rmk+kernel@xxxxxxxxxxxxxxxx>
---
arch/arm/mach-omap2/clock34xx.c | 15 +++++----------
1 files changed, 5 insertions(+), 10 deletions(-)
diff --git a/arch/arm/mach-omap2/clock34xx.c b/arch/arm/mach-omap2/clock34xx.c
index aad77e0..3d756ba 100644
--- a/arch/arm/mach-omap2/clock34xx.c
+++ b/arch/arm/mach-omap2/clock34xx.c
@@ -398,19 +398,14 @@ static int _omap3_noncore_dpll_lock(struct clk *clk)
ai = omap3_dpll_autoidle_read(clk);
+ omap3_dpll_deny_idle(clk);
+
_omap3_dpll_write_clken(clk, DPLL_LOCKED);
- if (ai) {
- /*
- * If no downstream clocks are enabled, CM_IDLEST bit
- * may never become active, so don't wait for DPLL to lock.
- */
- r = 0;
+ r = _omap3_wait_dpll_status(clk, 1);
+
+ if (ai)
omap3_dpll_allow_idle(clk);
- } else {
- r = _omap3_wait_dpll_status(clk, 1);
- omap3_dpll_deny_idle(clk);
- };
return r;
}
--
1.6.1.2
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
