Hi, Adds dual role support to dwc3 controller driver. Series depends on [1] for core OTG/dual-role support. Patches are based on v4.2-rc1. Tested on am437x-gp-evm and dra7-evm after platform related patches are applied. Those are sent seprately. You will also need the fixes mentioned in [2] [1] core OTG/DRD support - http://thread.gmane.org/gmane.linux.kernel/1991413 [2] fixes needed for dwc3 to work on dra7 - https://patchwork.kernel.org/patch/6732611/ - https://patchwork.kernel.org/patch/6725291/ - http://article.gmane.org/gmane.linux.usb.general/127693 cheers, -roger Felipe Balbi (1): usb: dwc3: core: Adapt to named interrupts George Cherian (1): usb: dwc3: dwc3-omap: Make the wrapper interrupt shared Roger Quadros (7): usb: dwc3: add dual-role support usb: dwc3: core.h: add some register definitions usb: dwc3: core: make dual-role work with OTG irq usb: dwc3: save/restore OTG registers during suspend/resume usb: dwc3: gadget: Fix suspend/resume during dual-role mode usb: dwc3: core: Prevent otg events from disabling themselves usb: dwc3: core: don't break during suspend/resume while we're dual-role drivers/usb/dwc3/core.c | 409 +++++++++++++++++++++++++++++++++++++-- drivers/usb/dwc3/core.h | 113 +++++++++++ drivers/usb/dwc3/dwc3-omap.c | 4 +- drivers/usb/dwc3/gadget.c | 8 +- drivers/usb/dwc3/platform_data.h | 1 + 5 files changed, 513 insertions(+), 22 deletions(-) -- 2.1.4 -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
