CONFIG_USB_OTG_FSM no longer exists and the OTG FSM
is available if CONFIG_USB_OTG is defined so move
to using CONFIG_USB_OTG.
Signed-off-by: Roger Quadros <rogerq@xxxxxx>
---
Documentation/usb/chipidea.txt | 2 +-
drivers/usb/chipidea/Makefile | 2 +-
drivers/usb/chipidea/ci.h | 2 +-
drivers/usb/chipidea/otg_fsm.h | 2 +-
drivers/usb/phy/Kconfig | 2 +-
5 files changed, 5 insertions(+), 5 deletions(-)
diff --git a/Documentation/usb/chipidea.txt b/Documentation/usb/chipidea.txt
index 3f848c1..e7f97da 100644
--- a/Documentation/usb/chipidea.txt
+++ b/Documentation/usb/chipidea.txt
@@ -5,7 +5,7 @@ with 2 Freescale i.MX6Q sabre SD boards.
1.1 How to enable OTG FSM in menuconfig
---------------------------------------
-Select CONFIG_USB_OTG_FSM, rebuild kernel Image and modules.
+Select CONFIG_USB_OTG, rebuild kernel Image and modules.
If you want to check some internal variables for otg fsm,
select CONFIG_USB_CHIPIDEA_DEBUG, there are 2 files which
can show otg fsm variables and some controller registers value:
diff --git a/drivers/usb/chipidea/Makefile b/drivers/usb/chipidea/Makefile
index 4decb12..63f2394 100644
--- a/drivers/usb/chipidea/Makefile
+++ b/drivers/usb/chipidea/Makefile
@@ -6,7 +6,7 @@ ci_hdrc-y := core.o otg.o
ci_hdrc-$(CONFIG_USB_CHIPIDEA_UDC) += udc.o
ci_hdrc-$(CONFIG_USB_CHIPIDEA_HOST) += host.o
ci_hdrc-$(CONFIG_USB_CHIPIDEA_DEBUG) += debug.o
-ci_hdrc-$(CONFIG_USB_OTG_FSM) += otg_fsm.o
+ci_hdrc-$(CONFIG_USB_OTG) += otg_fsm.o
# Glue/Bridge layers go here
diff --git a/drivers/usb/chipidea/ci.h b/drivers/usb/chipidea/ci.h
index 6d6200e..c04305e 100644
--- a/drivers/usb/chipidea/ci.h
+++ b/drivers/usb/chipidea/ci.h
@@ -405,7 +405,7 @@ static inline u32 hw_test_and_write(struct ci_hdrc *ci, enum ci_hw_regs reg,
*/
static inline bool ci_otg_is_fsm_mode(struct ci_hdrc *ci)
{
-#ifdef CONFIG_USB_OTG_FSM
+#ifdef CONFIG_USB_OTG
return ci->is_otg && ci->roles[CI_ROLE_HOST] &&
ci->roles[CI_ROLE_GADGET];
#else
diff --git a/drivers/usb/chipidea/otg_fsm.h b/drivers/usb/chipidea/otg_fsm.h
index 2689375..fb66695 100644
--- a/drivers/usb/chipidea/otg_fsm.h
+++ b/drivers/usb/chipidea/otg_fsm.h
@@ -62,7 +62,7 @@
/* SSEND time before SRP */
#define TB_SSEND_SRP (1500) /* minimum 1.5 sec, section:5.1.2 */
-#ifdef CONFIG_USB_OTG_FSM
+#ifdef CONFIG_USB_OTG
int ci_hdrc_otg_fsm_init(struct ci_hdrc *ci);
int ci_otg_fsm_work(struct ci_hdrc *ci);
diff --git a/drivers/usb/phy/Kconfig b/drivers/usb/phy/Kconfig
index 869c0cfcad..7e3459f 100644
--- a/drivers/usb/phy/Kconfig
+++ b/drivers/usb/phy/Kconfig
@@ -20,7 +20,7 @@ config AB8500_USB
config FSL_USB2_OTG
bool "Freescale USB OTG Transceiver Driver"
- depends on USB_EHCI_FSL && USB_FSL_USB2 && USB_OTG_FSM && PM
+ depends on USB_EHCI_FSL && USB_FSL_USB2 && PM
select USB_OTG
select USB_PHY
help
--
2.1.4
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
