On Wed 2015-07-01 03:34:22, Tony Lindgren wrote: > * Pavel Machek <pavel@xxxxxx> [150701 03:02]: > > On Wed 2015-07-01 09:22:55, Pali Rohár wrote: > > > On Tuesday 30 June 2015 23:59:33 Tony Lindgren wrote: > > > > * Pali Rohár <pali.rohar@xxxxxxxxx> [150630 02:55]: > > > > > > > > > > I will try 4.2 at the end of week. > > > > > > > > At least today's 4.1.0-11549-g05a8256 boots just fine on my n900. > > > > > > > > Regards, > > > > > > > > Tony > > > > > > So, Pavel can you re-test? Maybe there can be problem with some driver > > > which Tony did not compiled into zImage? Just speculation... > > > > I re-tested with today's git, and it seems to boot. Thanks for help... > > OK good to hear. > > > Now. "echo mem > /sys/power/state" is broken, as in "returns > > immediately in about 50% cases". The messages are > > > > Powerdomain (per_pwrdm) didn't enter target state 1 > > Powerdomain (core_pwerdm) didn't enter target state 1 > > > > Any ideas? Thanks, > > Works for me after enabling the idle timeouts with the following > script and blanking the screen and disconnecting USB: Um. I'm forcing suspend with "echo mem > /sys/power/state" . (It worked in 4.1). That should just make it sleep, no autosuspend-related trickery... (But yes, I guess I should set up the leds and try autosuspend, too.) Regards, Pavel -- (english) http://www.livejournal.com/~pavelmachek (cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
