Hello Ari et al., On Tue, 10 Mar 2009, Ben Dooks wrote: > On Fri, Mar 06, 2009 at 03:34:54PM +0200, Ari Kauppi wrote: > > I have observed some Spurious IRQ's for I2C1 when all kernel hacking options > > (and thus LOCKDEP) are disabled. > > > > Applying Richard Woodruff's 'I2C bug fixes for L-O and L-Z' seems to help > > but IRQF_DISABLED is needed for proper behaviour. > > > > Signed-off-by: Ari Kauppi <Ext-Ari.Kauppi@xxxxxxxxx> > > Acked-by: Felipe Balbi <felipe.balbi@xxxxxxxxx> > > --- > > drivers/i2c/busses/i2c-omap.c | 2 +- > > 1 files changed, 1 insertions(+), 1 deletions(-) > > > > diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c > > index 0c3ed41..18af43f 100644 > > --- a/drivers/i2c/busses/i2c-omap.c > > +++ b/drivers/i2c/busses/i2c-omap.c > > @@ -847,7 +847,7 @@ omap_i2c_probe(struct platform_device *pdev) > > omap_i2c_init(dev); > > > > isr = (dev->rev < OMAP_I2C_REV_2) ? omap_i2c_rev1_isr : omap_i2c_isr; > > - r = request_irq(dev->irq, isr, 0, pdev->name, dev); > > + r = request_irq(dev->irq, isr, IRQF_DISABLED, pdev->name, dev); > > Is disabling all IRQs on the system the right thing to do? Ben's right, there shouldn't be any need for this. This patch could cause some unnecessary interrupt service latency. Ari, are you seeing "Spurious irq XX: XXXXXXXX, please flush posted write for irq" messages? If so, the correct fix for this is to read from the device interrupt status register immediately after writing to it. This forces the ARM to wait until the write to the device is complete. Ari, could you make this change to i2c-omap.c:omap_i2c_isr() instead, and test whether this fixes the problem? + u32 tmp; ... omap_i2c_write_reg(dev, OMAP_I2C_STAT_REG, stat); + tmp = omap_i2c_read_reg(dev, OMAP_I2C_STAT_REG); /* OCP barrier */ - Paul -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
