Hello,
I have a problems when using simple-framebuffer: re-using the memory provided
by u-boot fails when calling ioremap_wc() in simplefb.c:
[ 0.370025] ------------[ cut here ]------------
[ 0.370086] WARNING: CPU: 0 PID: 1 at arch/arm/mm/ioremap.c:301 __arm_ioremap_pfn_caller+0x220/0x234()
[ 0.370086] Modules linked in:
[ 0.370117] CPU: 0 PID: 1 Comm: swapper Not tainted 4.1.0-rc4 #1
[ 0.370117] Hardware name: Generic OMAP36xx (Flattened Device Tree)
[ 0.370117] Backtrace:
[ 0.370178] [<c00198a0>] (show_stack) from [<c04ded24>] (dump_stack+0x24/0x28)
[ 0.370178] r5:0000012d r4:c066b608
[ 0.370208] [<c04ded00>] (dump_stack) from [<c003ca7c>] (warn_slowpath_null+0x78/0xe0)
[ 0.370208] [<c003ca04>] (warn_slowpath_null) from [<c001e07c>] (__arm_ioremap_pfn_caller+0x220/0x234)
[ 0.370239] r6:83800000 r5:00000000 r4:00083800
[ 0.370239] [<c001de5c>] (__arm_ioremap_pfn_caller) from [<c001e0e4>] (__arm_ioremap_caller+0x54/0x5c)
[ 0.370269] r10:c0653900 r9:c065390c r8:c3b11210 r7:c3aaa264 r6:00000000 r5:c3b11200
[ 0.370269] r4:00000003 r3:00000003
[ 0.370300] [<c001e090>] (__arm_ioremap_caller) from [<c001db80>] (__arm_ioremap+0x20/0x24)
[ 0.370300] r4:c3aaa000
[ 0.370330] [<c001db60>] (__arm_ioremap) from [<c02f2c44>] (simplefb_probe+0x1d8/0x82c)
[ 0.370361] [<c02f2a6c>] (simplefb_probe) from [<c033e8a8>] (platform_drv_probe+0x4c/0xac)
[ 0.370361] r10:00000000 r9:00000000 r8:c0653740 r7:fffffdfb r6:c0653740 r5:c3b11210
[ 0.370391] r4:c067dcf0
[ 0.370391] [<c033e85c>] (platform_drv_probe) from [<c033d068>] (driver_probe_device+0x2fc/0x388)
[ 0.370422] r7:c3b11218 r6:00000000 r5:c3b11210 r4:c067dcf0
[ 0.370452] [<c033cd6c>] (driver_probe_device) from [<c033d13c>] (__device_attach+0x48/0x4c)
[ 0.370452] r9:c067dccc r8:c3b11210 r7:c0657a54 r6:c033d0f4 r5:c3b11210 r4:c0653740
[ 0.370483] [<c033d0f4>] (__device_attach) from [<c033a958>] (bus_for_each_drv+0x6c/0xa0)
[ 0.370483] r5:c3b11210 r4:00000000
[ 0.370513] [<c033a8ec>] (bus_for_each_drv) from [<c033cacc>] (device_attach+0xb0/0x108)
[ 0.370513] r6:c0657d08 r5:c3b11244 r4:c3b11210
[ 0.370544] [<c033ca1c>] (device_attach) from [<c033c16c>] (bus_probe_device+0x8c/0xb0)
[ 0.370544] r6:c0657d08 r5:c3b11210 r4:c3b11218 r3:c3830f00
[ 0.370574] [<c033c0e0>] (bus_probe_device) from [<c03395c4>] (device_add+0x574/0x85c)
[ 0.370574] r6:00000000 r5:c0657bc8 r4:c3b11218 r3:00000001
[ 0.370605] [<c0339050>] (device_add) from [<c03dd680>] (of_device_add+0x3c/0x44)
[ 0.370635] r10:00000000 r9:c06065f0 r8:0000005f r7:c3b11210 r6:c3e3aad8 r5:00000000
[ 0.370635] r4:c3b11200
[ 0.370666] [<c03dd644>] (of_device_add) from [<c03de140>] (of_platform_device_create+0x84/0xc4)
[ 0.370697] [<c03de0bc>] (of_platform_device_create) from [<c06205b8>] (simplefb_init+0x5c/0x88)
[ 0.370697] r7:c062055c r6:c3b25400 r5:c067e260 r4:c3e3aad8
[ 0.370727] [<c062055c>] (simplefb_init) from [<c0009644>] (do_one_initcall+0x94/0x1dc)
[ 0.370727] r5:c063fa98 r4:c063fa98
[ 0.370758] [<c00095b0>] (do_one_initcall) from [<c0606dbc>] (kernel_init_freeable+0x12c/0x1d0)
[ 0.370758] r10:c06306ac r9:c06065f0 r8:0000005f r7:c066a640 r6:c066a640 r5:00000005
[ 0.370788] r4:c063aca8
[ 0.370788] [<c0606c90>] (kernel_init_freeable) from [<c04dbee8>] (kernel_init+0x10/0x218)
[ 0.370819] r10:00000000 r9:00000000 r8:00000000 r7:00000000 r6:00000000 r5:c04dbed8
[ 0.370819] r4:00000000
[ 0.370849] [<c04dbed8>] (kernel_init) from [<c0016920>] (ret_from_fork+0x14/0x34)
[ 0.370849] r5:c04dbed8 r4:00000000
[ 0.370910] ---[ end trace 58eeb60b5f9cadf1 ]---
[ 0.370941] simple-framebuffer: probe of 83800000.framebuffer failed with error -12
I tried with 4.0 and 4.1, also tried with disabled omapfb/dss, but always the same.
dts looks like this:
chosen {
#address-cells = <1>;
#size-cells = <1>;
ranges;
framebuffer@0 {
compatible = "simple-framebuffer";
reg = <0x83800000 (320 * 240 * 3)>;
width = <320>;
height = <240>;
stride = <(320 * 3)>;
format = "r8g8b8";
display = <&lcd0>;
};
};
Is there any special to do in u-boot to make it work?
u-boot shows a splash screen correctly.
I saw in sunxi code is a workaround if ioremap_wc() fails,
https://groups.google.com/forum/#!topic/linux-sunxi/C6pKdmKeZKY
Is something similar also needed for the omap?
Many thanks,
Peter
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
