* Pantelis Antoniou <pantelis.antoniou@xxxxxxxxxxxx> [150513 01:05]:
> The beaglebone family of boards contain two I2C busses enabled.
> The first one with a baseboard identification EEPROM and a
> cape I2C bus.
This seems safe to apply as the i2c2 pins are listed in the cape
specification.
These pins could be used for other devices too.. But in that case
the cape would not follow the cape standard.
Regards,
Tony
> Signed-off-by: Pantelis Antoniou <pantelis.antoniou@xxxxxxxxxxxx>
> ---
> arch/arm/boot/dts/am335x-bone-common.dtsi | 66 +++++++++++++++++++++++++++++++
> 1 file changed, 66 insertions(+)
>
> diff --git a/arch/arm/boot/dts/am335x-bone-common.dtsi b/arch/arm/boot/dts/am335x-bone-common.dtsi
> index c3255e0..236b7db 100644
> --- a/arch/arm/boot/dts/am335x-bone-common.dtsi
> +++ b/arch/arm/boot/dts/am335x-bone-common.dtsi
> @@ -81,6 +81,13 @@
> >;
> };
>
> + i2c2_pins: pinmux_i2c2_pins {
> + pinctrl-single,pins = <
> + 0x178 (PIN_INPUT_PULLUP | MUX_MODE3) /* uart1_ctsn.i2c2_sda */
> + 0x17c (PIN_INPUT_PULLUP | MUX_MODE3) /* uart1_rtsn.i2c2_scl */
> + >;
> + };
> +
> uart0_pins: pinmux_uart0_pins {
> pinctrl-single,pins = <
> 0x170 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */
> @@ -218,8 +225,67 @@
> reg = <0x24>;
> };
>
> + baseboard_eeprom: baseboard_eeprom@50 {
> + compatible = "at,24c256";
> + reg = <0x50>;
> +
> + #address-cells = <1>;
> + #size-cells = <1>;
> + baseboard_data: baseboard_data@0 {
> + reg = <0 0x100>;
> + };
> + };
> +};
> +
> +&i2c2 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&i2c2_pins>;
> +
> + status = "okay";
> + clock-frequency = <100000>;
> +
> + cape_eeprom0: cape_eeprom0@54 {
> + compatible = "at,24c256";
> + reg = <0x54>;
> + #address-cells = <1>;
> + #size-cells = <1>;
> + cape0_data: cape_data@0 {
> + reg = <0 0x100>;
> + };
> + };
> +
> + cape_eeprom1: cape_eeprom1@55 {
> + compatible = "at,24c256";
> + reg = <0x55>;
> + #address-cells = <1>;
> + #size-cells = <1>;
> + cape1_data: cape_data@0 {
> + reg = <0 0x100>;
> + };
> + };
> +
> + cape_eeprom2: cape_eeprom2@56 {
> + compatible = "at,24c256";
> + reg = <0x56>;
> + #address-cells = <1>;
> + #size-cells = <1>;
> + cape2_data: cape_data@0 {
> + reg = <0 0x100>;
> + };
> + };
> +
> + cape_eeprom3: cape_eeprom3@57 {
> + compatible = "at,24c256";
> + reg = <0x57>;
> + #address-cells = <1>;
> + #size-cells = <1>;
> + cape3_data: cape_data@0 {
> + reg = <0 0x100>;
> + };
> + };
> };
>
> +
> /include/ "tps65217.dtsi"
>
> &tps {
> --
> 1.7.12
>
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
