Documentation for adp1653 binding.
---
> Please split this as Javier suggested. I'd think both could go through
> the media-tree unless someone objects.
Please apply.
> > + - power-gpios: Reference to the GPIO that controls the power for the chip.
>
> You're using power-gpios in documentation only.
Which is ok, because generic code adds "-gpios" itself.
> The spec refers to this by "EN". How about "en-gpios" instead? This
> definitely isn't about power, but about resetting the chip. It gets the
> power through another pin.
It controls power of the chip. Noone gets _power_ through gpios,
hopefully. Yes, I can rename it. "en-gpios" is too ugly to
live. Sebastian suggested "enable". Hope that's okay with you.
Pavel
new file mode 100644
index 0000000..da9934a
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/adp1653.txt
@@ -0,0 +1,37 @@
+* Analog Devices ADP1653 flash LED driver
+
+Required Properties:
+
+ - compatible: Must contain be "adi,adp1653"
+
+ - reg: I2C slave address
+
+ - power-gpios: Reference to the GPIO that controls the power for the chip.
+
+There are two LED outputs available - flash and indicator. One LED is
+represented by one child node, nodes need to be named "flash" and "indicator".
+
+Required properties of the LED child node:
+- max-microamp : see Documentation/devicetree/bindings/leds/common.txt
+
+Required properties of the flash LED child node:
+
+- flash-max-microamp : see Documentation/devicetree/bindings/leds/common.txt
+- flash-timeout-us : see Documentation/devicetree/bindings/leds/common.txt
+
+Example:
+
+ adp1653: led-controller@30 {
+ compatible = "adi,adp1653";
+ reg = <0x30>;
+ power-gpios = <&gpio3 24 GPIO_ACTIVE_HIGH>; /* 88 */
+
+ flash {
+ flash-timeout-us = <500000>;
+ flash-max-microamp = <320000>;
+ max-microamp = <50000>;
+ };
+ indicator {
+ max-microamp = <17500>;
+ };
+ };
--
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
