On Tuesday 24 March 2015 01:09 AM, Nishanth Menon wrote:
From: Keerthy <j-keerthy@xxxxxx> Add bandgap and related thermal nodes. The patch adds 5 thermal sensors. Only one cooling device for mpu as of now. The sensors are the exact same on both dra72 and dra7. Introduce CPU, GPU, core nodes for the moment as they are direct reuse of OMAP5 entities. NOTE: OMAP4 has a finer counter granularity, which allows for a delay of 1000ms in the thermal zone polling intervals. DRA7 have different counter mechanism, which allows at maximum a 500ms timer. Adjust the cpu thermal zone accordingly for DRA7. Signed-off-by: Keerthy <j-keerthy@xxxxxx> [t-kristo@xxxxxx: few reuse from OMAP5 entities] Signed-off-by: Tero Kristo <t-kristo@xxxxxx> Signed-off-by: Nishanth Menon <nm@xxxxxx> --- Changes since V1: - omap5-cpu-thermal.dtsi dropped - approach similar to omap5 - added core and gpu thermal dtsi(they can be reused) - Squashed patch #1 from v1 to patch #2 - this patch. - Not carrying forward ack due to change
Thanks for updating Nishanth. Looks good to me. - Keerthy
V1: http://marc.info/?t=142688102700006&r=1&w=2 arch/arm/boot/dts/dra7.dtsi | 23 +++++++++++++++++++++++ arch/arm/boot/dts/dra72x.dtsi | 5 +++++ arch/arm/boot/dts/dra74x.dtsi | 5 +++++ 3 files changed, 33 insertions(+) diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi index eea4a54d6cb3..2d6a7e3e001f 100644 --- a/arch/arm/boot/dts/dra7.dtsi +++ b/arch/arm/boot/dts/dra7.dtsi @@ -177,6 +177,18 @@ }; }; + bandgap: bandgap@4a0021e0 { + reg = <0x4a0021e0 0xc + 0x4a00232c 0xc + 0x4a002380 0x2c + 0x4a0023C0 0x3c + 0x4a002564 0x8 + 0x4a002574 0x50>; + compatible = "ti,dra752-bandgap"; + interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>; + #thermal-sensor-cells = <1>; + }; + cm_core_aon: cm_core_aon@4a005000 { compatible = "ti,dra7-cm-core-aon"; reg = <0x4a005000 0x2000>; @@ -1419,6 +1431,17 @@ status = "disabled"; }; }; + + thermal_zones: thermal-zones { + #include "omap4-cpu-thermal.dtsi" + #include "omap5-gpu-thermal.dtsi" + #include "omap5-core-thermal.dtsi" + }; + +}; + +&cpu_thermal { + polling-delay = <500>; /* milliseconds */ }; /include/ "dra7xx-clocks.dtsi" diff --git a/arch/arm/boot/dts/dra72x.dtsi b/arch/arm/boot/dts/dra72x.dtsi index e5a3d23a3df1..6ac8e3601499 100644 --- a/arch/arm/boot/dts/dra72x.dtsi +++ b/arch/arm/boot/dts/dra72x.dtsi @@ -20,6 +20,11 @@ device_type = "cpu"; compatible = "arm,cortex-a15"; reg = <0>; + + /* cooling options */ + cooling-min-level = <0>; + cooling-max-level = <2>; + #cooling-cells = <2>; /* min followed by max */ }; }; diff --git a/arch/arm/boot/dts/dra74x.dtsi b/arch/arm/boot/dts/dra74x.dtsi index 10173fab1a15..eef981f4bcd5 100644 --- a/arch/arm/boot/dts/dra74x.dtsi +++ b/arch/arm/boot/dts/dra74x.dtsi @@ -31,6 +31,11 @@ clock-names = "cpu"; clock-latency = <300000>; /* From omap-cpufreq driver */ + + /* cooling options */ + cooling-min-level = <0>; + cooling-max-level = <2>; + #cooling-cells = <2>; /* min followed by max */ }; cpu@1 { device_type = "cpu";
-- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
