Re: [PATCHv5 29/35] ARM: dts: am4372: add minimal l4 bus layout with control module support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 03/25/2015 11:10 AM, Tero Kristo wrote:
On 03/24/2015 10:10 PM, Suman Anna wrote:
Hi Tero,

On 03/20/2015 01:44 PM, Kristo, Tero wrote:
This patch creates an l4_wkup interconnect for AM43xx, and moves some of
the generic peripherals under it. System control module nodes are moved
under this new interconnect also, and the SCM clock layout is changed
to use the renamed SCM nodea as the clock provider.

Signed-off-by: Tero Kristo <t-kristo@xxxxxx>
---
  Documentation/devicetree/bindings/arm/omap/l4.txt  |    1 +
  .../devicetree/bindings/arm/omap/prcm.txt          |    2 +-
  arch/arm/boot/dts/am4372.dtsi                      |   85
+++++++++++---------
  arch/arm/boot/dts/am43xx-clocks.dtsi               |    2 +-
  arch/arm/mach-omap2/control.c                      |    2 +-
  5 files changed, 53 insertions(+), 39 deletions(-)

diff --git a/Documentation/devicetree/bindings/arm/omap/l4.txt
b/Documentation/devicetree/bindings/arm/omap/l4.txt
index d333f0a..941b914 100644
--- a/Documentation/devicetree/bindings/arm/omap/l4.txt
+++ b/Documentation/devicetree/bindings/arm/omap/l4.txt
@@ -7,6 +7,7 @@ Required properties:
             Should be "ti,omap2-l4-wkup" for OMAP2 family l4 wkup bus
             Should be "ti,omap3-l4-core" for OMAP3 family l4 core bus
             Should be "ti,am3-l4-wkup" for AM33xx family l4 wkup bus
+           Should be "ti,am4-l4-wkup" for AM43xx family l4 wkup bus
  - ranges : contains the IO map range for the bus

  Examples:
diff --git a/Documentation/devicetree/bindings/arm/omap/prcm.txt
b/Documentation/devicetree/bindings/arm/omap/prcm.txt
index c8e2027..8af4f32 100644
--- a/Documentation/devicetree/bindings/arm/omap/prcm.txt
+++ b/Documentation/devicetree/bindings/arm/omap/prcm.txt
@@ -12,7 +12,7 @@ Required properties:
          "ti,am3-prcm"
          "ti,am3-scm"
          "ti,am4-prcm"
-        "ti,am4-scrm"
+        "ti,am4-scm"
          "ti,omap2-prcm"
          "ti,omap2-scm"
          "ti,omap3-prm"
diff --git a/arch/arm/boot/dts/am4372.dtsi
b/arch/arm/boot/dts/am4372.dtsi
index 1943fc3..9ed58115 100644
--- a/arch/arm/boot/dts/am4372.dtsi
+++ b/arch/arm/boot/dts/am4372.dtsi
@@ -57,22 +57,6 @@
          cache-level = <2>;
      };

-    am43xx_control_module: control_module@4a002000 {
-        compatible = "syscon";
-        reg = <0x44e10000 0x7f4>;
-    };
-
-    am43xx_pinmux: pinmux@44e10800 {
-        compatible = "ti,am437-padconf", "pinctrl-single";
-        reg = <0x44e10800 0x31c>;
-        #address-cells = <1>;
-        #size-cells = <0>;
-        #interrupt-cells = <1>;
-        interrupt-controller;
-        pinctrl-single,register-width = <32>;
-        pinctrl-single,function-mask = <0xffffffff>;
-    };
-
      ocp {
          compatible = "ti,am4372-l3-noc", "simple-bus";
          #address-cells = <1>;
@@ -84,29 +68,58 @@
          interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
                   <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;

-        prcm: prcm@44df0000 {
-            compatible = "ti,am4-prcm";
-            reg = <0x44df0000 0x11000>;
-
-            prcm_clocks: clocks {
-                #address-cells = <1>;
-                #size-cells = <0>;
-            };
+        l4_wkup: l4_wkup@44c00000 {
+            compatible = "ti,am4-l4-wkup", "simple-bus";
+            #address-cells = <1>;
+            #size-cells = <1>;
+            ranges = <0 0x44c00000 0x287000>;

-            prcm_clockdomains: clockdomains {
-            };
-        };
+            prcm: prcm@1f0000 {
+                compatible = "ti,am4-prcm";
+                reg = <0x1f0000 0x11000>;

-        scrm: scrm@44e10000 {
-            compatible = "ti,am4-scrm";
-            reg = <0x44e10000 0x2000>;
+                prcm_clocks: clocks {
+                    #address-cells = <1>;
+                    #size-cells = <0>;
+                };

-            scrm_clocks: clocks {
-                #address-cells = <1>;
-                #size-cells = <0>;
+                prcm_clockdomains: clockdomains {
+                };
              };

-            scrm_clockdomains: clockdomains {
+            scm: scm@210000 {
+                compatible = "ti,am4-scm", "simple-bus";
+                reg = <0x210000 0x1000>;

Any reason for choosing a different size here compared to AM335x. Also,
the scrm node above has 0x2000 as size. I found that I needed to
increase the size to 0x2000 here to accomodate the wkup_m3_ipc node on
top of your series. The node uses IPC registers which are part of the
Control module, so on AM335x, I added it as a child node of scm, but
here to do the same I have to correct the size. Also, there are some
DISPPLL related registers at 0x3000 offset within the Control module,
not sure where they would fit.

It looks like I shrank the size of the scm address-space based on
current children on it. I'll increase this to 0x4000 to accommodate
everything under the SCM. A separate syscon mapping needs to be created
for the DISPPLL stuff if required.

Patch has been force updated in the branch now to reflect this. scm_conf node is also size 0x800.

-Tero


-Tero


regards
Suman

+                #address-cells = <1>;
+                #size-cells = <1>;
+                ranges = <0 0x210000 0x1000>;
+
+                am43xx_pinmux: pinmux@800 {
+                    compatible = "ti,am437-padconf",
+                             "pinctrl-single";
+                    reg = <0x800 0x31c>;
+                    #address-cells = <1>;
+                    #size-cells = <0>;
+                    #interrupt-cells = <1>;
+                    interrupt-controller;
+                    pinctrl-single,register-width = <32>;
+                    pinctrl-single,function-mask = <0xffffffff>;
+                };
+
+                scm_conf: scm_conf@0 {
+                    compatible = "syscon";
+                    reg = <0x0 0x7fc>;
+                    #address-cells = <1>;
+                    #size-cells = <1>;
+
+                    scm_clocks: clocks {
+                        #address-cells = <1>;
+                        #size-cells = <0>;
+                    };
+                };
+
+                scm_clockdomains: clockdomains {
+                };
              };
          };


[snip]



--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux Arm (vger)]     [ARM Kernel]     [ARM MSM]     [Linux Tegra]     [Linux WPAN Networking]     [Linux Wireless Networking]     [Maemo Users]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Trails]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux