DESHDCP clock is needed on DRA7 based SoCs to enable the DSS IP. That
clock is an odd one, as it is not supposed to be any kind of core clock
for DSS, and we don't even support HDCP, but the clock is still needed
even for the HWMOD framework to be able to reset the DSS IP.
As there's no support for multiple core clocks in the HWMOD framework,
we don't have any obvious place to enable this clock when DSS IP is
being enabled.
Furthermore, the HDMI on OMAP5 DSS is the same as on DRA7, and OMAP5
does not have any such clock configuration bit. This suggests that on
OMAP5 the DESHDCP clock is always enabled, and for DRA7 we have the
possibility to gate it.
So, as we don't have any clean way to enable and disable the clock
based on the need, this patch enables the clock at boot time, making it
work similarly to OMAP5.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
---
drivers/clk/ti/clk-7xx.c | 7 ++++++-
1 file changed, 6 insertions(+), 1 deletion(-)
diff --git a/drivers/clk/ti/clk-7xx.c b/drivers/clk/ti/clk-7xx.c
index 7b859ec31a14..e132d0677c03 100644
--- a/drivers/clk/ti/clk-7xx.c
+++ b/drivers/clk/ti/clk-7xx.c
@@ -308,7 +308,7 @@ static struct ti_dt_clk dra7xx_clks[] = {
int __init dra7xx_dt_clk_init(void)
{
int rc;
- struct clk *abe_dpll_mux, *sys_clkin2, *dpll_ck;
+ struct clk *abe_dpll_mux, *sys_clkin2, *dpll_ck, *hdcp_ck;
ti_dt_clocks_register(dra7xx_clks);
@@ -344,5 +344,10 @@ int __init dra7xx_dt_clk_init(void)
if (rc)
pr_err("%s: failed to set USB_DPLL M2 OUT\n", __func__);
+ hdcp_ck = clk_get_sys(NULL, "dss_deshdcp_clk");
+ rc = clk_prepare_enable(hdcp_ck);
+ if (rc)
+ pr_err("%s: failed to set dss_deshdcp_clk\n", __func__);
+
return rc;
}
--
2.3.3
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
