When 'enable_off_mode' is 0, and (mpu_state < PWRDM_POWER_RET)
the local variables mpu_state and core_state are modified; but
the usage count for the original state selected by the governor
are updated.
This patch updates the 'last_state' in the cpuidle driver to ensure
that statistics for the correct state are updated.
Signed-off-by: Sanjeev Premi <premi@xxxxxx>
---
arch/arm/mach-omap2/cpuidle34xx.c | 25 +++++++++++++++++--------
1 files changed, 17 insertions(+), 8 deletions(-)
diff --git a/arch/arm/mach-omap2/cpuidle34xx.c b/arch/arm/mach-omap2/cpuidle34xx.c
index 62fbb2e..5838838 100644
--- a/arch/arm/mach-omap2/cpuidle34xx.c
+++ b/arch/arm/mach-omap2/cpuidle34xx.c
@@ -76,23 +76,32 @@ static int omap3_enter_idle(struct cpuidle_device *dev,
{
struct omap3_processor_cx *cx = cpuidle_get_statedata(state);
struct timespec ts_preidle, ts_postidle, ts_idle;
- u32 mpu_state = cx->mpu_state, core_state = cx->core_state;
+ u32 mpu_state, core_state;
current_cx_state = *cx;
/* Used to keep track of the total time in idle */
getnstimeofday(&ts_preidle);
- local_irq_disable();
- local_fiq_disable();
-
+ /*
+ * Adjust the idle state (if required).
+ * Also, ensure that usage statistics of correct state are updated.
+ */
if (!enable_off_mode) {
- if (mpu_state < PWRDM_POWER_RET)
- mpu_state = PWRDM_POWER_RET;
- if (core_state < PWRDM_POWER_RET)
- core_state = PWRDM_POWER_RET;
+ if (cx->type > OMAP3_STATE_C4) {
+ state = &(dev->states[OMAP3_STATE_C4 - 1]);
+ dev->last_state = state ;
+
+ cx = cpuidle_get_statedata(state);
+ }
}
+ mpu_state = cx->mpu_state;
+ core_state = cx->core_state;
+
+ local_irq_disable();
+ local_fiq_disable();
+
pwrdm_set_next_pwrst(mpu_pd, mpu_state);
pwrdm_set_next_pwrst(core_pd, core_state);
--
1.5.6
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
