The register offset for REGEN2_CTRL in different for TPS659038 chip as when
compared with other Palmas family PMICs. In the case of TPS659038 the wrong
offset pointed to PLLEN_CTRL and was causing a hang. Correcting the same.
Signed-off-by: Keerthy <j-keerthy@xxxxxx>
---
Tested for the regulator enumerations on DRA7 and BEAGLE-X15 boards.
No Hang observed.
drivers/regulator/palmas-regulator.c | 4 ++++
include/linux/mfd/palmas.h | 3 +++
2 files changed, 7 insertions(+)
diff --git a/drivers/regulator/palmas-regulator.c b/drivers/regulator/palmas-regulator.c
index 9205f43..1819831 100644
--- a/drivers/regulator/palmas-regulator.c
+++ b/drivers/regulator/palmas-regulator.c
@@ -1572,6 +1572,10 @@ static int palmas_regulators_probe(struct platform_device *pdev)
if (!pmic)
return -ENOMEM;
+ if (of_device_is_compatible(node, "ti,tps659038-pmic"))
+ palmas_generic_regs_info[PALMAS_REG_REGEN2].ctrl_addr =
+ TPS659038_REGEN2_CTRL;
+
pmic->dev = &pdev->dev;
pmic->palmas = palmas;
palmas->pmic = pmic;
diff --git a/include/linux/mfd/palmas.h b/include/linux/mfd/palmas.h
index fb0390a..ee7b1ce 100644
--- a/include/linux/mfd/palmas.h
+++ b/include/linux/mfd/palmas.h
@@ -2999,6 +2999,9 @@ enum usb_irq_events {
#define PALMAS_GPADC_TRIM15 0x0E
#define PALMAS_GPADC_TRIM16 0x0F
+/* TPS659038 regen2_ctrl offset iss different from palmas */
+#define TPS659038_REGEN2_CTRL 0x12
+
/* TPS65917 Interrupt registers */
/* Registers for function INTERRUPT */
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
