* Alan Stern <stern@xxxxxxxxxxxxxxxxxxx> [150306 11:05]:
> On Fri, 6 Mar 2015, Tony Lindgren wrote:
>
> > > > + struct wakeirq_source *wirq = _wirq;
> > > > + irqreturn_t ret = IRQ_NONE;
> > > > +
> > > > + /* We don't want RPM_ASYNC or RPM_NOWAIT here */
> > > > + if (pm_runtime_suspended(wirq->dev)) {
> > >
> > > What if the device is resumed on a different CPU right here?
> >
> > Good point, sounds like we need to do this in some pm_runtime
> > function directly for the locking.
> >
> > > > + pm_runtime_mark_last_busy(wirq->dev);
> > > > + pm_runtime_resume(wirq->dev);
> > >
> > > Calling this with disabled interrupts is a bad idea in general.
> > > Is the device guaranteed to have power.irq_safe set?
> >
> > Well right now it's using threaded irq, and I'd like to get rid of
> > the pm_runtime calls in the regular driver interrupts completely.
> > We need to ensure the device runtime_resume is completed before
> > returning IRQ_HANDLED here.
>
> In general, runtime_resume methods are allowed to sleep. They can't be
> used in an interrupt handler top half unless the driver has
> specifically promised they are IRQ-safe. That's what Rafael was
> getting at.
Yes I understand, otherwise things certainly would not work :)
> Of course, if this routine is a threaded-irq bottom half then there's
> no problem.
Right this is threaded-irq bottom half because the devices may
need to restore state and start regulators.
> > > I guess what you want to call here is pm_request_resume() and
> > > I wouldn't say that calling pm_runtime_mark_last_busy() on a
> > > suspended device was valid.
> >
> > I'll verify again, but I believe the issue was that without doing
> > mark_last_busy here the device falls back asleep right away.
> > That probably should be fixed in pm_runtime in general if that's
> > the case.
>
> It's up to the subsystem to handle this. For example, the USB
> subsystem's runtime-resume routine calls pm_runtime_mark_last_busy.
Hmm.. OK thanks this probably explains why pm_request_resume() did
not work.
For omaps, I could call this from the interconnect related code,
but then how dow we deal with the subsystems that don't call it?
> > Considering the above, should we add a new function something like
> > pm_resume_complete() that does not need irq_safe set but does
> > not return until the device has completed resume?
>
> That doesn't make sense. You're asking for a routine that is allowed
> to sleep but can safely be called in interrupt context.
Oh it naturally would not work in irq context, it's for the bottom
half again. But I'll take a look if we can just call
pm_request_resume() and disable_irq() on the wakeirq in without
waiting for the device driver runtime_suspend to disable the wakeirq.
That would minimize the interface to just dev_pm_request_wakeirq()
and dev_pm_free_wakeirq().
Regards,
Tony
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
