* Paul Walmsley <paul@xxxxxxxxx> [150305 10:16]: > On Thu, 5 Mar 2015, Dave Gerlach wrote: > > > Introduce a dt property, ti,no-init, that prevents hwmod initialization. > > Even if a dt node is marked as disabled, hwmod still at least enables > > the hwmod and programs the sysconfig before attempting to idle it at > > boot. If an IP has been disabled by the hardware configuration on a > > platform, this will cause a hang due to writing to inactive registers. > > This property prevents that from happening by marking the hwmod as > > _HWMOD_STATE_DISABLED during init. > > I'm kind of wondering if hwmod should even touch a device if it's marked > as disabled in the DT. Tony, what do you think? Well nothing happens if a device is status = "disabled". No dev entry gets created for it at all and hwmod won't have any data for the device populated. The only way hwmod code could see that device if the device gets it's data from the legacy omap_hwmod_*_data.c instead of DT. So maybe the comments in the $subject patch are incorrect for that? What we really should have is also status = "incomplete" where the dev entry gets created, but the driver never probes. This would be for devices that are still there within the SoC, but not pinned out for the board in question. We still may need also ti,no-init too for devices that we don't want hwmod to do anything with, for example in secure mode if some blocks are not available to Linux at all. I believe that's what's going on with n900 crypto accelerators for example. Regards, Tony -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html