On Thu, Feb 12, 2015 at 3:03 PM, Marek Belisko <marek@xxxxxxxxxxxxx> wrote:
> From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
>
> This device tree allows to boot, supports the panel,
> framebuffer, touch screen, as well as some more peripherals.
> Since there is a OMAP3530 based 600 MHz variant and a DM3730 based
> 1 GHz variant we must include this common device tree code
> in one of two CPU specific device trees.
>
> Signed-off-by: H. Nikolaus Schaller <hns@xxxxxxxxxxxxx>
> Signed-off-by: Marek Belisko <marek@xxxxxxxxxxxxx>
> ---
> arch/arm/boot/dts/omap3-pandora-common.dtsi | 641 ++++++++++++++++++++++++++++
> 1 file changed, 641 insertions(+)
> create mode 100644 arch/arm/boot/dts/omap3-pandora-common.dtsi
>
> diff --git a/arch/arm/boot/dts/omap3-pandora-common.dtsi b/arch/arm/boot/dts/omap3-pandora-common.dtsi
> new file mode 100644
> index 0000000..0a2a878
> --- /dev/null
> +++ b/arch/arm/boot/dts/omap3-pandora-common.dtsi
> @@ -0,0 +1,641 @@
...
> +
> + gpio-leds {
> +
> + compatible = "gpio-leds";
> +
> + pinctrl-names = "default";
> + pinctrl-0 = <&led_pins>;
> +
> + led@1 {
> + label = "pandora::sd1";
> + gpios = <&gpio5 0 GPIO_ACTIVE_HIGH>; /* GPIO_128 */
> + linux,default-trigger = "mmc0";
> + default-state = "off";
> + };
> +
> + led@2 {
> + label = "pandora::sd2";
> + gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>; /* GPIO_129 */
> + linux,default-trigger = "mmc1";
> + default-state = "off";
> + };
> +
> + led@3 {
> + label = "pandora::bluetooth";
> + gpios = <&gpio5 30 GPIO_ACTIVE_HIGH>; /* GPIO_158 */
> + linux,default-trigger = "heartbeat";
I'd prefer this had no trigger, but no strong feelings here.
> + default-state = "off";
> + };
> +
> + led@4 {
> + label = "pandora::wifi";
> + gpios = <&gpio5 31 GPIO_ACTIVE_HIGH>; /* GPIO_159 */
> + linux,default-trigger = "mmc2";
> + default-state = "off";
> + };
> + };
> +
> + gpio-keys {
> + compatible = "gpio-keys";
> +
> + pinctrl-names = "default";
> + pinctrl-0 = <&button_pins>;
> +
> + up-button {
> + label = "up";
> + linux,code = <KEY_UP>;
> + gpios = <&gpio4 14 GPIO_ACTIVE_HIGH>; /* GPIO_110 */
> + gpio-key,wakeup;
> + };
> +
> + down-button {
> + label = "down";
> + linux,code = <KEY_DOWN>;
> + gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* GPIO_103 */
> + gpio-key,wakeup;
> + };
> +
> + left-button {
> + label = "left";
> + linux,code = <KEY_LEFT>;
> + gpios = <&gpio4 0 GPIO_ACTIVE_HIGH>; /* GPIO_96 */
> + gpio-key,wakeup;
> + };
> +
> + right-button {
> + label = "right";
> + linux,code = <KEY_RIGHT>;
> + gpios = <&gpio4 2 GPIO_ACTIVE_HIGH>; /* GPIO_98 */
> + gpio-key,wakeup;
> + };
> +
> + pageup-button {
> + label = "game 1";
> + linux,code = <KEY_PAGEUP>;
> + gpios = <&gpio4 13 GPIO_ACTIVE_HIGH>; /* GPIO_109 */
> + gpio-key,wakeup;
> + };
> +
> + pagedown-button {
> + label = "game 3";
> + linux,code = <KEY_PAGEDOWN>;
> + gpios = <&gpio4 10 GPIO_ACTIVE_HIGH>; /* GPIO_106 */
> + gpio-key,wakeup;
> + };
> +
> + home-button {
> + label = "game 4";
> + linux,code = <KEY_HOME>;
> + gpios = <&gpio4 5 GPIO_ACTIVE_HIGH>; /* GPIO_101 */
> + gpio-key,wakeup;
> + };
> +
> + end-button {
> + label = "game 2";
> + linux,code = <KEY_END>;
> + gpios = <&gpio4 15 GPIO_ACTIVE_HIGH>; /* GPIO_111 */
> + gpio-key,wakeup;
> + };
> +
> + right-shift {
> + label = "l";
> + linux,code = <KEY_RIGHTSHIFT>;
> + gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* GPIO_102 */
> + gpio-key,wakeup;
> + };
> +
> + kp-plus {
> + label = "l2";
> + linux,code = <KEY_KPPLUS>;
> + gpios = <&gpio4 1 GPIO_ACTIVE_HIGH>; /* GPIO_97 */
> + gpio-key,wakeup;
> + };
> +
> + right-ctrl {
> + label = "r";
> + linux,code = <KEY_RIGHTCTRL>;
> + gpios = <&gpio4 9 GPIO_ACTIVE_HIGH>; /* GPIO_105 */
> + gpio-key,wakeup;
> + };
> +
> + kp-minus {
> + label = "r2";
> + linux,code = <KEY_KPMINUS>;
> + gpios = <&gpio4 11 GPIO_ACTIVE_HIGH>; /* GPIO_107 */
> + gpio-key,wakeup;
> + };
> +
> + left-ctrl {
> + label = "ctrl";
> + linux,code = <KEY_LEFTCTRL>;
> + gpios = <&gpio4 8 GPIO_ACTIVE_HIGH>; /* GPIO_104 */
> + gpio-key,wakeup;
> + };
> +
> + menu {
> + label = "menu";
> + linux,code = <KEY_MENU>;
> + gpios = <&gpio4 3 GPIO_ACTIVE_HIGH>; /* GPIO_99 */
> + gpio-key,wakeup;
> + };
> +
> + hold {
> + label = "hold";
> + linux,code = <KEY_COFFEE>;
> + gpios = <&gpio6 16 GPIO_ACTIVE_HIGH>; /* GPIO_176 */
> + gpio-key,wakeup;
> + };
> +
> + left-alt {
> + label = "alt";
> + linux,code = <KEY_LEFTALT>;
> + gpios = <&gpio4 4 GPIO_ACTIVE_HIGH>; /* GPIO_100 */
> + gpio-key,wakeup;
> + };
> +
> + lid {
> + label = "lid";
> + linux,code = <0x00>; /* SW_LID lid shut */
> + linux,input-type = <0x05>; /* EV_SW */
> + gpios = <&gpio4 12 GPIO_ACTIVE_HIGH>; /* GPIO_108 */
> + gpio-key,wakeup;
> + };
This is not right, all button GPIOs are active low except GPIO_100,
which is active high. GPIO_108 should not have the wakeup flag set
because lid switch power is normally cut during low power modes.
...
> +
> + dss_dpi_pins: pinmux_dss_dpi_pins {
> + pinctrl-single,pins = <
> + OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT | MUX_MODE0) /* dss_pclk.dss_pclk */
> + OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT | MUX_MODE0) /* dss_hsync.dss_hsync */
> + OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT | MUX_MODE0) /* dss_vsync.dss_vsync */
> + OMAP3_CORE1_IOPAD(0x20da, PIN_OUTPUT | MUX_MODE0) /* dss_acbias.dss_acbias */
> + OMAP3_CORE1_IOPAD(0x20dc, PIN_OUTPUT | MUX_MODE0) /* dss_data0.dss_data0 */
> + OMAP3_CORE1_IOPAD(0x20de, PIN_OUTPUT | MUX_MODE0) /* dss_data1.dss_data1 */
> + OMAP3_CORE1_IOPAD(0x20e0, PIN_OUTPUT | MUX_MODE0) /* dss_data2.dss_data2 */
> + OMAP3_CORE1_IOPAD(0x20e2, PIN_OUTPUT | MUX_MODE0) /* dss_data3.dss_data3 */
> + OMAP3_CORE1_IOPAD(0x20e4, PIN_OUTPUT | MUX_MODE0) /* dss_data4.dss_data4 */
> + OMAP3_CORE1_IOPAD(0x20e6, PIN_OUTPUT | MUX_MODE0) /* dss_data5.dss_data5 */
> + OMAP3_CORE1_IOPAD(0x20e8, PIN_OUTPUT | MUX_MODE0) /* dss_data6.dss_data6 */
> + OMAP3_CORE1_IOPAD(0x20ea, PIN_OUTPUT | MUX_MODE0) /* dss_data7.dss_data7 */
> + OMAP3_CORE1_IOPAD(0x20ec, PIN_OUTPUT | MUX_MODE0) /* dss_data8.dss_data8 */
> + OMAP3_CORE1_IOPAD(0x20ee, PIN_OUTPUT | MUX_MODE0) /* dss_data9.dss_data9 */
> + OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT | MUX_MODE0) /* dss_data10.dss_data10 */
> + OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT | MUX_MODE0) /* dss_data11.dss_data11 */
> + OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT | MUX_MODE0) /* dss_data12.dss_data12 */
> + OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT | MUX_MODE0) /* dss_data13.dss_data13 */
> + OMAP3_CORE1_IOPAD(0x20f8, PIN_OUTPUT | MUX_MODE0) /* dss_data14.dss_data14 */
> + OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT | MUX_MODE0) /* dss_data15.dss_data15 */
> + OMAP3_CORE1_IOPAD(0x20fc, PIN_OUTPUT | MUX_MODE0) /* dss_data16.dss_data16 */
> + OMAP3_CORE1_IOPAD(0x20fe, PIN_OUTPUT | MUX_MODE0) /* dss_data17.dss_data17 */
> + OMAP3_CORE1_IOPAD(0x2100, PIN_OUTPUT | MUX_MODE0) /* dss_data18.dss_data18 */
> + OMAP3_CORE1_IOPAD(0x2102, PIN_OUTPUT | MUX_MODE0) /* dss_data19.dss_data19 */
> + OMAP3_CORE1_IOPAD(0x2104, PIN_OUTPUT | MUX_MODE0) /* dss_data20.dss_data20 */
> + OMAP3_CORE1_IOPAD(0x2106, PIN_OUTPUT | MUX_MODE0) /* dss_data21.dss_data21 */
> + OMAP3_CORE1_IOPAD(0x2108, PIN_OUTPUT | MUX_MODE0) /* dss_data22.dss_data22 */
> + OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT | MUX_MODE0) /* dss_data23.dss_data23 */
> + OMAP3_CORE1_IOPAD(0x218e, PIN_OUTPUT | MUX_MODE4) /* GPIO_157 = lcd reset */
> + >;
> + };
> +
> + uart3_pins: pinmux_uart3_pins {
> + pinctrl-single,pins = <
> + OMAP3_CORE1_IOPAD(0x219e, PIN_INPUT | PIN_OFF_WAKEUPENABLE | MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */
> + OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0) /* uart3_tx_irtx.uart3_tx_irtx */
> + >;
> + };
> +
> + led_pins: pinmux_leds_pins {
> + pinctrl-single,pins = <
> + OMAP3_CORE1_IOPAD(0x2154, PIN_OUTPUT | MUX_MODE4) /* GPIO_128 */
> + OMAP3_CORE1_IOPAD(0x2156, PIN_OUTPUT | MUX_MODE4) /* GPIO_129 */
> + OMAP3_CORE1_IOPAD(0x2190, PIN_OUTPUT | MUX_MODE4) /* GPIO_158 */
> + OMAP3_CORE1_IOPAD(0x2192, PIN_OUTPUT | MUX_MODE4) /* GPIO_159 */
> + >;
> + };
> +
> + button_pins: pinmux_button_pins {
> + pinctrl-single,pins = <
> + OMAP3_CORE1_IOPAD(0x2110, PIN_INPUT_PULLUP | MUX_MODE4) /* GPIO_96 */
> + OMAP3_CORE1_IOPAD(0x2112, PIN_INPUT_PULLUP | MUX_MODE4) /* GPIO_97 */
> + OMAP3_CORE1_IOPAD(0x2114, PIN_INPUT_PULLUP | MUX_MODE4) /* GPIO_98 */
> + OMAP3_CORE1_IOPAD(0x2116, PIN_INPUT_PULLUP | MUX_MODE4) /* GPIO_99 */
> + OMAP3_CORE1_IOPAD(0x2118, PIN_INPUT_PULLUP | MUX_MODE4) /* GPIO_100 */
> + OMAP3_CORE1_IOPAD(0x211a, PIN_INPUT_PULLUP | MUX_MODE4) /* GPIO_101 */
> + OMAP3_CORE1_IOPAD(0x211c, PIN_INPUT_PULLUP | MUX_MODE4) /* GPIO_102 */
> + OMAP3_CORE1_IOPAD(0x211e, PIN_INPUT_PULLUP | MUX_MODE4) /* GPIO_103 */
> + OMAP3_CORE1_IOPAD(0x2120, PIN_INPUT_PULLUP | MUX_MODE4) /* GPIO_104 */
> + OMAP3_CORE1_IOPAD(0x2122, PIN_INPUT_PULLUP | MUX_MODE4) /* GPIO_105 */
> + OMAP3_CORE1_IOPAD(0x2124, PIN_INPUT_PULLUP | MUX_MODE4) /* GPIO_106 */
> + OMAP3_CORE1_IOPAD(0x2126, PIN_INPUT_PULLUP | MUX_MODE4) /* GPIO_107 */
> + OMAP3_CORE1_IOPAD(0x2128, PIN_INPUT_PULLUP | MUX_MODE4) /* GPIO_108 */
> + OMAP3_CORE1_IOPAD(0x212a, PIN_INPUT_PULLUP | MUX_MODE4) /* GPIO_109 */
> + OMAP3_CORE1_IOPAD(0x212c, PIN_INPUT_PULLUP | MUX_MODE4) /* GPIO_110 */
> + OMAP3_CORE1_IOPAD(0x212e, PIN_INPUT_PULLUP | MUX_MODE4) /* GPIO_111 */
> + OMAP3_CORE1_IOPAD(0x21d2, PIN_INPUT_PULLUP | MUX_MODE4) /* GPIO_176 */
We should not set pullups for all the buttons, they all have external pullups.
> + >;
> + };
> +
> + penirq_pins: pinmux_penirq_pins {
> + pinctrl-single,pins = <
> + /* here we could enable to wakeup the cpu from suspend by a pen touch */
> + OMAP3_CORE1_IOPAD(0x210c, PIN_INPUT_PULLUP | MUX_MODE4) /* GPIO_94 */
Again, we already have external pullup, no need to waste power.
...
> +
> +&mmc1 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&mmc1_pins>;
> + vmmc-supply = <&vmmc1>;
> + bus-width = <4>;
> + cd-gpios = <&twl_gpio 0 GPIO_ACTIVE_LOW>;
> + wp-gpios = <&gpio4 30 GPIO_ACTIVE_LOW>; /* GPIO_126 */
Large number of pandoras have defective write potect pins. Kernel used
to not support write protect at all, so we noticed it too late. If
it's possible to omit this it would be better do so, perhaps with a
comment, or I can send a patch later...
> +};
> +
> +&mmc2 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&mmc2_pins>;
> + vmmc-supply = <&vmmc2>;
> + bus-width = <4>;
> + cd-gpios = <&twl_gpio 1 GPIO_ACTIVE_HIGH>;
> + wp-gpios = <&gpio4 31 GPIO_ACTIVE_LOW>; /* GPIO_127 */
same here
Gražvydas
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
