Re: [PATCH 00/11] ARM: OMAP3: legacy clock data move under clk driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 01/30/2015 02:42 AM, Mike Turquette wrote:
Quoting Tero Kristo (2015-01-29 12:19:29)
On 01/08/2015 01:00 AM, Tony Lindgren wrote:
* Tero Kristo <t-kristo@xxxxxx> [141216 08:22]:
Hi,

These patches move the legacy clock data for omap3 under drivers/clk/ti.
After these patches are applied, it should be possible to get rid of
clk-private.h (long pending project for Mike.)

Testing done (on top of 3.18-rc1):

omap3-beagle: boot / suspend-resume (ret/off) / cpuidle (ret/off)
omap3-beagle-xm: boot upto fs mount (see note below)
sdp3430: boot
n900: boot

Note: beagle-xm failed with FS mount on the board I have access to, but
        this happens with clean 3.18-rc1 and linux-next also at the moment.
        The board has probably corrupted filesystem image but I am unable
        to fix this atm (remote board.)

Test branch:
tree: https://github.com/t-kristo/linux-pm.git
branch: 3.18-rc1-omap3-clk-rework

Great, hopefully this will finally allow Mike to make the
generic struct clk private to drivers/clk :)

Seems to boot just fine based on a quick legacy booting test
on n900.

Mike, assuming no other issues, can you please apply these into a
immutable branch against v3.19-rc1 that Paul and I can also merge
in as needed?

Please also feel free to add:

Acked-by: Tony Lindgren <tony@xxxxxxxxxxx>


I just rebased these patches on top of 3.19-rc1, and noticed a problem
with dpll5 on beagle-xm (basically a divide-by-zero error + locking
issue during boot.) The extra diff at the end of this email fixes the
problems, I will also send the updated two patches as v2. Updated branch
available in my tree under name 3.19-rc1-omap3-clk-rework.

I've applied these 11 patches on top of v3.19-rc1, including the two V2
patches for #6 and #8 to the clk-omap-legacy branch here:

git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux.git clk-omap-legacy

Let me know if I screwed anything up. I've merged this immutable branch
into clk-next.

In addition I've made some changes to remove clk-private.h permanently.
I'll post those later today. Again, please let me know if I screwed
anything up.

I can't see the clk-omap-legacy merged to clk-next so far, maybe you did not push it yet? The branch itself is identical copy of mine, so can't see any issues there so far.

-Tero


Regards,
Mike


- Tero

---------------------

diff --git a/drivers/clk/ti/clk-3xxx-legacy.c
b/drivers/clk/ti/clk-3xxx-legacy.c
index 81ad510..e0732a4 100644
--- a/drivers/clk/ti/clk-3xxx-legacy.c
+++ b/drivers/clk/ti/clk-3xxx-legacy.c
@@ -136,6 +136,7 @@ static struct ti_clk_dpll dpll3_ck_data = {
         .idlest_mask = 0x1,
         .auto_recal_bit = 0x3,
         .max_divider = 0x80,
+       .min_divider = 0x1,
         .recal_en_bit = 0x5,
         .max_multiplier = 0x7ff,
         .enable_mask = 0x7,
@@ -307,6 +308,7 @@ static struct ti_clk_dpll dpll4_ck_data = {
         .idlest_mask = 0x2,
         .auto_recal_bit = 0x13,
         .max_divider = 0x80,
+       .min_divider = 0x1,
         .recal_en_bit = 0x6,
         .max_multiplier = 0x7ff,
         .enable_mask = 0x70000,
@@ -507,6 +509,7 @@ static struct ti_clk_dpll dpll5_ck_data = {
         .idlest_mask = 0x1,
         .auto_recal_bit = 0x3,
         .max_divider = 0x80,
+       .min_divider = 0x1,
         .recal_en_bit = 0x19,
         .max_multiplier = 0x7ff,
         .enable_mask = 0x7,
@@ -1271,6 +1274,7 @@ static struct ti_clk_dpll dpll1_ck_data = {
         .idlest_mask = 0x1,
         .auto_recal_bit = 0x3,
         .max_divider = 0x80,
+       .min_divider = 0x1,
         .recal_en_bit = 0x7,
         .max_multiplier = 0x7ff,
         .enable_mask = 0x7,
@@ -2154,6 +2158,7 @@ static struct ti_clk_dpll dpll2_ck_data = {
         .idlest_mask = 0x1,
         .auto_recal_bit = 0x3,
         .max_divider = 0x80,
+       .min_divider = 0x1,
         .recal_en_bit = 0x8,
         .max_multiplier = 0x7ff,
         .enable_mask = 0x7,
@@ -2513,6 +2518,7 @@ static struct ti_clk_dpll dpll4_ck_omap36xx_data = {
         .idlest_mask = 0x2,
         .auto_recal_bit = 0x13,
         .max_divider = 0x80,
+       .min_divider = 0x1,
         .recal_en_bit = 0x6,
         .max_multiplier = 0xfff,
         .enable_mask = 0x70000,
diff --git a/drivers/clk/ti/clock.h b/drivers/clk/ti/clock.h
index 8d9c603..404158d 100644
--- a/drivers/clk/ti/clock.h
+++ b/drivers/clk/ti/clock.h
@@ -148,6 +148,7 @@ struct ti_clk_dpll {
         u32 sddiv_mask;
         u16 max_multiplier;
         u16 max_divider;
+       u8 min_divider;
         u8 auto_recal_bit;
         u8 recal_en_bit;
         u8 recal_st_bit;
diff --git a/drivers/clk/ti/dpll.c b/drivers/clk/ti/dpll.c
index 7d67639..47ebff7 100644
--- a/drivers/clk/ti/dpll.c
+++ b/drivers/clk/ti/dpll.c
@@ -243,6 +243,7 @@ struct clk *ti_clk_register_dpll(struct ti_clk *setup)
         dd->sddiv_mask = dpll->sddiv_mask;
         dd->dco_mask = dpll->dco_mask;
         dd->max_divider = dpll->max_divider;
+       dd->min_divider = dpll->min_divider;
         dd->max_multiplier = dpll->max_multiplier;
         dd->auto_recal_bit = dpll->auto_recal_bit;
         dd->recal_en_bit = dpll->recal_en_bit;


--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux Arm (vger)]     [ARM Kernel]     [ARM MSM]     [Linux Tegra]     [Linux WPAN Networking]     [Linux Wireless Networking]     [Maemo Users]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Trails]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux