Re: [PATCH v2 3/5] usb: dwc3: Add quirk for Synopsis device disconnection errata

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,

On Wed, Jan 21, 2015 at 05:02:57PM +0800, Sneeker Yeh wrote:
> Hi Felipe:
> 
> Thanks for reviewing these,
> 
> 2015-01-19 22:50 GMT+08:00 Felipe Balbi <balbi@xxxxxx>:
> > Hi,
> >
> > On Mon, Jan 19, 2015 at 03:56:47PM +0800, Sneeker Yeh wrote:
> >> Synopsis Designware USB3 IP earlier than v3.00a which is configured in silicon
> >> with DWC_USB3_SUSPEND_ON_DISCONNECT_EN=1, would need a specific quirk to prevent
> >> xhci host controller from dying when device is disconnected.
> >>
> >> Since DWC_USB3_SUSPEND_ON_DISCONNECT_EN is an IP configuration whose state
> >> cannot be checked from software in runtime, it has to be enabled via platform
> >> data or device tree.
> >>
> >> Signed-off-by: Sneeker Yeh <Sneeker.Yeh@xxxxxxxxxxxxxx>
> >> ---
> >>  Documentation/devicetree/bindings/usb/dwc3.txt |   17 +++++++++++++++++
> >>  drivers/usb/dwc3/core.c                        |    6 ++++++
> >>  drivers/usb/dwc3/core.h                        |    1 +
> >>  drivers/usb/dwc3/host.c                        |    4 ++++
> >>  drivers/usb/dwc3/platform_data.h               |    1 +
> >>  5 files changed, 29 insertions(+)
> >>
> >> diff --git a/Documentation/devicetree/bindings/usb/dwc3.txt b/Documentation/devicetree/bindings/usb/dwc3.txt
> >> index cd7f045..1b78b29 100644
> >> --- a/Documentation/devicetree/bindings/usb/dwc3.txt
> >> +++ b/Documentation/devicetree/bindings/usb/dwc3.txt
> >> @@ -37,6 +37,23 @@ Optional properties:
> >>   - snps,is-utmi-l1-suspend: true when DWC3 asserts output signal
> >>                       utmi_l1_suspend_n, false when asserts utmi_sleep_n
> >>   - snps,hird-threshold: HIRD threshold
> >> + - snps,has_suspend_on_disconnect: true when IP is configured in silicon with
> >> +                     DWC_USB3_SUSPEND_ON_DISCONNECT_EN=1, it can inject a
> >> +                     specific quirk to prevent xhci host controller from
> >> +                     dying when usb device is disconnected from root hub.
> >> +                     Since DWC_USB3_SUSPEND_ON_DISCONNECT_EN is an IP
> >> +                     configuration whose state cannot be checked from
> >> +                     software in runtime, it has to be enabled via platform
> >> +                     data or device tree.
> >> +
> >> +                     xhci host dying symptom here is caused by that
> >> +                     DWC_USB3_SUSPEND_ON_DISCONNECT_EN=1
> >> +                     configuration makes IP auto-suspended after PORTCSC is
> >> +                     cleared when usb device detached, then an asynchronous
> >> +                     disconnection procedure might fail using endpoint
> >> +                     command that suspened IP won't have any response to.
> >> +
> >> +                     this issue is fixed when IP version >= 3.00a.
> >>
> >>  This is usually a subnode to DWC3 glue to which it is connected.
> >>
> >> diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
> >> index 25ddc39..fbceab1 100644
> >> --- a/drivers/usb/dwc3/core.c
> >> +++ b/drivers/usb/dwc3/core.c
> >> @@ -838,6 +838,9 @@ static int dwc3_probe(struct platform_device *pdev)
> >>                               "snps,tx_de_emphasis_quirk");
> >>               of_property_read_u8(node, "snps,tx_de_emphasis",
> >>                               &tx_de_emphasis);
> >> +
> >> +             dwc->suspend_on_disconnect_quirk = of_property_read_bool(node,
> >> +                             "snps,has_suspend_on_disconnect");
> >>       } else if (pdata) {
> >>               dwc->maximum_speed = pdata->maximum_speed;
> >>               dwc->has_lpm_erratum = pdata->has_lpm_erratum;
> >> @@ -864,6 +867,9 @@ static int dwc3_probe(struct platform_device *pdev)
> >>               dwc->tx_de_emphasis_quirk = pdata->tx_de_emphasis_quirk;
> >>               if (pdata->tx_de_emphasis)
> >>                       tx_de_emphasis = pdata->tx_de_emphasis;
> >> +
> >> +             dwc->suspend_on_disconnect_quirk =
> >> +                     pdata->has_suspend_on_disconnect;
> >>       }
> >>
> >>       /* default to superspeed if no maximum_speed passed */
> >> diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h
> >> index 8090249..d7458ff 100644
> >> --- a/drivers/usb/dwc3/core.h
> >> +++ b/drivers/usb/dwc3/core.h
> >> @@ -832,6 +832,7 @@ struct dwc3 {
> >>
> >>       unsigned                tx_de_emphasis_quirk:1;
> >>       unsigned                tx_de_emphasis:2;
> >> +     unsigned                suspend_on_disconnect_quirk:1;
> >
> > you're missing the comment on the structure and these should be
> > alphabetically sorted.
> 
> okay, I see, I'll change it like this:
> 
> --- a/drivers/usb/dwc3/core.h
> +++ b/drivers/usb/dwc3/core.h
> @@ -692,6 +692,9 @@ struct dwc3_scratchpad_array {
>   * @resize_fifos: tells us it's ok to reconfigure our TxFIFO sizes.
>   * @setup_packet_pending: true when there's a Setup Packet in FIFO. Workaround
>   * @start_config_issued: true when StartConfig command has been issued
> + * @suspend_on_disconnect_quirk: set if core was configured with
> + *                     DWC_USB3_SUSPEND_ON_DISCONNECT_EN=1. Note that there's
> + *                     now way for software to detect this in runtime.
>   * @three_stage_setup: set if we perform a three phase setup
>   * @disable_scramble_quirk: set if we enable the disable scramble quirk
>   * @u2exit_lfps_quirk: set if we enable u2exit lfps quirk
> @@ -818,6 +821,7 @@ struct dwc3 {
>         unsigned                resize_fifos:1;
>         unsigned                setup_packet_pending:1;
>         unsigned                start_config_issued:1;
> +       unsigned                suspend_on_disconnect_quirk:1;
>         unsigned                three_stage_setup:1;
> 
>         unsigned                disable_scramble_quirk:1;
> 
> 
> >
> >> diff --git a/drivers/usb/dwc3/host.c b/drivers/usb/dwc3/host.c
> >> index 12bfd3c..9c42074 100644
> >> --- a/drivers/usb/dwc3/host.c
> >> +++ b/drivers/usb/dwc3/host.c
> >> @@ -53,6 +53,10 @@ int dwc3_host_init(struct dwc3 *dwc)
> >>       pdata.usb3_lpm_capable = 1;
> >>  #endif
> >>
> >> +     if ((dwc->revision < DWC3_REVISION_300A) &&
> >> +         dwc->suspend_on_disconnect_quirk)
> >> +             pdata.delay_portcsc_clear = 1;
> >> +
> >>       ret = platform_device_add_data(xhci, &pdata, sizeof(pdata));
> >>       if (ret) {
> >>               dev_err(dwc->dev, "couldn't add platform data to xHCI device\n");
> >> diff --git a/drivers/usb/dwc3/platform_data.h b/drivers/usb/dwc3/platform_data.h
> >> index a3a3b6d..69562f1 100644
> >> --- a/drivers/usb/dwc3/platform_data.h
> >> +++ b/drivers/usb/dwc3/platform_data.h
> >> @@ -44,4 +44,5 @@ struct dwc3_platform_data {
> >>
> >>       unsigned tx_de_emphasis_quirk:1;
> >>       unsigned tx_de_emphasis:2;
> >> +     unsigned has_suspend_on_disconnect:1;
> >
> > needs a comment at the top of this structure and should sorted.
> 
> okay, I'll do it like this:
> 
> --- a/drivers/usb/dwc3/platform_data.h
> +++ b/drivers/usb/dwc3/platform_data.h
> @@ -20,6 +20,13 @@
>  #include <linux/usb/ch9.h>
>  #include <linux/usb/otg.h>
> 
> +/**
> + * struct dwc3_platform_data - platform data of dwc3 controller
> + * @has_suspend_on_disconnect: true if core was configured with
> + *                     DWC_USB3_SUSPEND_ON_DISCONNECT_EN=1. Note that there's
> + *                     now way for software to detect this in runtime.
> + */
> +
>  struct dwc3_platform_data {
>         enum usb_device_speed maximum_speed;
>         enum usb_dr_mode dr_mode;
> @@ -32,6 +39,7 @@ struct dwc3_platform_data {
> 
>         unsigned disable_scramble_quirk:1;
>         unsigned has_lpm_erratum:1;
> +       unsigned has_suspend_on_disconnect:1;
>         unsigned u2exit_lfps_quirk:1;
>         unsigned u2ss_inp3_quirk:1;
>         unsigned req_p1p2p3_quirk:1;

looks good, thanks

-- 
balbi

Attachment: signature.asc
Description: Digital signature


[Index of Archives]     [Linux Arm (vger)]     [ARM Kernel]     [ARM MSM]     [Linux Tegra]     [Linux WPAN Networking]     [Linux Wireless Networking]     [Maemo Users]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Trails]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux