The gic_arch_extn hack that a number of platform use has been nagging
me for too long. It is only there for the benefit of a few platform,
and yet it impacts all GIC users. Moreover, it gives people the wrong
idea ("let's use it to put some new custom hack in there"...).
But now that stacked irq domains have been merged into 3.19, the time
has come for gic_arch_extn to meet the Big Bit Bucket.
This patch series takes several steps towards the elimination of
gic_arch_extn:
- moves Tegra's legacy interrupt controller support to
drivers/irqchip, implementing a stacked domain on top of the
standard GIC.
- OMAP, imx6 and exynos are also converted to stacked domains, but
their implementation is left in place (the code is far too
intricately mixed with other details of the platform for me to even
try to move it). Some OMAP variants get a special treatment as we
also kill the crossbar horror (more on that below).
- shmobile, ux500 and zynq are only slightly modified.
- The GIC itself is cleaned up, and some other bits and bobs are
adjusted for a good measure.
About the TI crossbar:
- The allocation of interrupts in this domain is fairly similar to
what we do for MSI (see the GICv2m driver), and stacked domains have
proved to be a fitting solution.
- The current description in DT is currently entierely inaccurate, and
as we're already breaking it for the WUGEN block, we might as well
do it again for the crossbar.
- The way crossbar, WUGEN and GIC interract is quite complex (this is
effectively a stack of three interrupt controllers with interesting
exceptions and braindead routing), and stacked domains are the right
abstraction for that.
- Other platforms (Freescale Vybrid) are starting to come up with the
same type of things, and it'd be good to avoid them following the
same broken model.
- It removes a few lines from the code base so it can't completely be
a bad idea!
So this patch series does exactly that: make the crossbar a stacked
interrupt controller that only takes care of setting up the routing,
fix the DTs to represent the actual HW, and remove a bit of the
craziness from the GIC code.
It is worth realizing that:
- I haven't been able to test this as much as I would have wanted to
(it's only been tested on tegra2, omap4 and omap5).
- I've created DT bindings when needed, updated existing ones, but I
haven't created a binding for platforms that already used an
undocumented one (imx6, I'm looking at you).
- I've relaxed quite a bit of the locking in the GIC code. I believe
this is safe, but someone else should give it a long hard look.
- This actively *breaks* existing setups. Once you boot a new kernel
with an old DT, suspend/resume *will* be broken. Old kernels on a
new DT won't even boot! You've been warned. This really outline the
necessity of actually describing the HW in device trees...
As for the patches, they are on top of 3.19-rc3 + the patch posted
here [4].
I've pushed the code to:
git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms.git irq/die-gic-arch-extn-die-die-die
I'm still targetting 3.20 for this, but obviously things are getting
quite tight. I'd very much like to hear from the maintainers about
their views concerning this series.
Thanks,
M.
* From v4 [3]:
- Rebased on top of the patch working around hardcoded IRQ on OMAP4/5 [4]
- Fixed more iMX6 DTs (Stephan)
- Fixed Exynos4/5 DTs
* From v2 [2]:
- Addressed numerous comments from Thierry
- Merged bug fixes from Nishanth
- Merged bug fix from Stefan
* From v1 [1]:
- Rebased on 3.19-rc3
- Fixed a number of additional platforms
- Added crossbar conversion to stacked domains
- Merged bug fixes from Nishanth
[4]: http://lists.infradead.org/pipermail/linux-arm-kernel/2015-January/317286.html
[3]: http://lists.infradead.org/pipermail/linux-arm-kernel/2015-January/315385.html
[2]: http://lists.infradead.org/pipermail/linux-arm-kernel/2015-January/314041.html
[1]: http://lists.infradead.org/pipermail/linux-arm-kernel/2014-November/307338.html
Marc Zyngier (21):
ARM: tegra: irq: nuke leftovers from non-DT support
irqchip: tegra: add DT-based support for legacy interrupt controller
ARM: tegra: skip gic_arch_extn setup if DT has a LIC node
ARM: tegra: update DTs to expose legacy interrupt controller
DT: tegra: add binding for the legacy interrupt controller
ARM: tegra: remove old LIC support
genirq: Add irqchip_set_wake_parent
irqchip: crossbar: convert dra7 crossbar to stacked domains
DT: update ti,irq-crossbar binding
irqchip: GIC: get rid of routable domain
DT: arm,gic: kill arm,routable-irqs
DT: omap4/5: add binding for the wake-up generator
ARM: omap: convert wakeupgen to stacked domains
ARM: imx6: convert GPC to stacked domains
ARM: exynos4/5: convert pmu wakeup to stacked domains
DT: exynos: update PMU binding
irqchip: gic: add an entry point to set up irqchip flags
ARM: shmobile: remove use of gic_arch_extn.irq_set_wake
ARM: ux500: switch from gic_arch_extn to gic_set_irqchip_flags
ARM: zynq: switch from gic_arch_extn to gic_set_irqchip_flags
irqchip: gic: Drop support for gic_arch_extn
Documentation/devicetree/bindings/arm/gic.txt | 6 -
.../devicetree/bindings/arm/omap/crossbar.txt | 18 +-
.../devicetree/bindings/arm/samsung/pmu.txt | 13 +
.../interrupt-controller/nvidia,tegra-ictlr.txt | 43 +++
.../interrupt-controller/ti,omap4-wugen-mpu | 33 ++
arch/arm/boot/dts/am4372.dtsi | 11 +-
arch/arm/boot/dts/am437x-gp-evm.dts | 1 -
arch/arm/boot/dts/am437x-sk-evm.dts | 1 -
arch/arm/boot/dts/am43x-epos-evm.dts | 1 -
arch/arm/boot/dts/am57xx-beagle-x15.dts | 3 +-
arch/arm/boot/dts/dra7-evm.dts | 2 +-
arch/arm/boot/dts/dra7.dtsi | 43 ++-
arch/arm/boot/dts/dra72-evm.dts | 1 -
arch/arm/boot/dts/dra72x.dtsi | 3 +-
arch/arm/boot/dts/dra74x.dtsi | 5 +-
arch/arm/boot/dts/exynos4.dtsi | 4 +
arch/arm/boot/dts/exynos5250.dtsi | 4 +
arch/arm/boot/dts/exynos5420.dtsi | 4 +
arch/arm/boot/dts/imx6qdl.dtsi | 7 +-
arch/arm/boot/dts/imx6sl.dtsi | 6 +-
arch/arm/boot/dts/imx6sx.dtsi | 6 +-
arch/arm/boot/dts/omap4-duovero.dtsi | 2 -
arch/arm/boot/dts/omap4-panda-common.dtsi | 8 +-
arch/arm/boot/dts/omap4-sdp.dts | 8 +-
arch/arm/boot/dts/omap4-var-som-om44.dtsi | 2 -
arch/arm/boot/dts/omap4.dtsi | 18 +-
arch/arm/boot/dts/omap5-cm-t54.dts | 1 -
arch/arm/boot/dts/omap5-uevm.dts | 2 -
arch/arm/boot/dts/omap5.dtsi | 26 +-
arch/arm/boot/dts/tegra114.dtsi | 16 +-
arch/arm/boot/dts/tegra124.dtsi | 16 +-
arch/arm/boot/dts/tegra20.dtsi | 15 +-
arch/arm/boot/dts/tegra30.dtsi | 16 +-
arch/arm/mach-exynos/exynos.c | 14 +-
arch/arm/mach-exynos/suspend.c | 122 ++++++-
arch/arm/mach-imx/common.h | 1 -
arch/arm/mach-imx/gpc.c | 127 +++++--
arch/arm/mach-imx/mach-imx6q.c | 1 -
arch/arm/mach-imx/mach-imx6sl.c | 1 -
arch/arm/mach-imx/mach-imx6sx.c | 1 -
arch/arm/mach-omap2/omap-wakeupgen.c | 125 +++++--
arch/arm/mach-omap2/omap-wakeupgen.h | 1 -
arch/arm/mach-omap2/omap4-common.c | 21 +-
arch/arm/mach-shmobile/intc-sh73a0.c | 7 +-
arch/arm/mach-shmobile/setup-r8a7779.c | 7 +-
arch/arm/mach-tegra/iomap.h | 15 -
arch/arm/mach-tegra/irq.c | 209 +-----------
arch/arm/mach-tegra/irq.h | 6 -
arch/arm/mach-tegra/tegra.c | 1 -
arch/arm/mach-ux500/cpu.c | 2 +-
arch/arm/mach-zynq/common.c | 2 +-
drivers/irqchip/Makefile | 1 +
drivers/irqchip/irq-crossbar.c | 207 +++++++-----
drivers/irqchip/irq-gic.c | 112 +------
drivers/irqchip/irq-tegra.c | 368 +++++++++++++++++++++
include/linux/irq.h | 1 +
include/linux/irqchip/arm-gic.h | 9 +-
include/linux/irqchip/irq-crossbar.h | 11 -
kernel/irq/chip.c | 16 +
59 files changed, 1111 insertions(+), 622 deletions(-)
create mode 100644 Documentation/devicetree/bindings/interrupt-controller/nvidia,tegra-ictlr.txt
create mode 100644 Documentation/devicetree/bindings/interrupt-controller/ti,omap4-wugen-mpu
create mode 100644 drivers/irqchip/irq-tegra.c
delete mode 100644 include/linux/irqchip/irq-crossbar.h
--
2.1.4
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
