On Tue, Jan 13, 2015 at 03:13:51PM -0800, Tony Lindgren wrote:
> The support for 81xx was never working in mainline, and it
> will be only supported in device tree mode. Let's remove all
> the remaining 81xx related platform code.
you should probably also mention here that you're dropping unnecessary
non-DT AM33xx support since that has never booted on legacy mode.
Other than that
Reviewed-by: Felipe Balbi <balbi@xxxxxx>
> Cc: Brian Hutchinson <b.hutchman@xxxxxxxxx>
> Signed-off-by: Tony Lindgren <tony@xxxxxxxxxxx>
> ---
> arch/arm/mach-omap2/cclock3xxx_data.c | 6 +-----
> arch/arm/mach-omap2/omap_phy_internal.c | 35 ---------------------------------
> arch/arm/mach-omap2/usb-musb.c | 12 ++---------
> arch/arm/mach-omap2/usb.h | 2 --
> 4 files changed, 3 insertions(+), 52 deletions(-)
>
> diff --git a/arch/arm/mach-omap2/cclock3xxx_data.c b/arch/arm/mach-omap2/cclock3xxx_data.c
> index 644ff32..e79c80b 100644
> --- a/arch/arm/mach-omap2/cclock3xxx_data.c
> +++ b/arch/arm/mach-omap2/cclock3xxx_data.c
> @@ -3634,10 +3634,6 @@ int __init omap3xxx_clk_init(void)
> omap_clocks_register(omap36xx_am35xx_omap3430es2plus_clks,
> ARRAY_SIZE(omap36xx_am35xx_omap3430es2plus_clks));
> omap_clocks_register(omap3xxx_clks, ARRAY_SIZE(omap3xxx_clks));
> - } else if (soc_is_am33xx()) {
> - cpu_mask = RATE_IN_AM33XX;
> - } else if (cpu_is_ti814x()) {
> - cpu_mask = RATE_IN_TI814X;
> } else if (cpu_is_omap34xx()) {
> if (omap_rev() == OMAP3430_REV_ES1_0) {
> cpu_mask = RATE_IN_3430ES1;
> @@ -3681,7 +3677,7 @@ int __init omap3xxx_clk_init(void)
> * Lock DPLL5 -- here only until other device init code can
> * handle this
> */
> - if (!cpu_is_ti81xx() && (omap_rev() >= OMAP3430_REV_ES2_0))
> + if (omap_rev() >= OMAP3430_REV_ES2_0)
> omap3_clk_lock_dpll5();
>
> /* Avoid sleeping during omap3_core_dpll_m2_set_rate() */
> diff --git a/arch/arm/mach-omap2/omap_phy_internal.c b/arch/arm/mach-omap2/omap_phy_internal.c
> index 1a19fa0..8e90356 100644
> --- a/arch/arm/mach-omap2/omap_phy_internal.c
> +++ b/arch/arm/mach-omap2/omap_phy_internal.c
> @@ -152,38 +152,3 @@ void am35x_set_mode(u8 musb_mode)
>
> omap_ctrl_writel(devconf2, AM35XX_CONTROL_DEVCONF2);
> }
> -
> -void ti81xx_musb_phy_power(u8 on)
> -{
> - void __iomem *scm_base = NULL;
> - u32 usbphycfg;
> -
> - scm_base = ioremap(TI81XX_SCM_BASE, SZ_2K);
> - if (!scm_base) {
> - pr_err("system control module ioremap failed\n");
> - return;
> - }
> -
> - usbphycfg = readl_relaxed(scm_base + USBCTRL0);
> -
> - if (on) {
> - if (cpu_is_ti816x()) {
> - usbphycfg |= TI816X_USBPHY0_NORMAL_MODE;
> - usbphycfg &= ~TI816X_USBPHY_REFCLK_OSC;
> - } else if (cpu_is_ti814x()) {
> - usbphycfg &= ~(USBPHY_CM_PWRDN | USBPHY_OTG_PWRDN
> - | USBPHY_DPINPUT | USBPHY_DMINPUT);
> - usbphycfg |= (USBPHY_OTGVDET_EN | USBPHY_OTGSESSEND_EN
> - | USBPHY_DPOPBUFCTL | USBPHY_DMOPBUFCTL);
> - }
> - } else {
> - if (cpu_is_ti816x())
> - usbphycfg &= ~TI816X_USBPHY0_NORMAL_MODE;
> - else if (cpu_is_ti814x())
> - usbphycfg |= USBPHY_CM_PWRDN | USBPHY_OTG_PWRDN;
> -
> - }
> - writel_relaxed(usbphycfg, scm_base + USBCTRL0);
> -
> - iounmap(scm_base);
> -}
> diff --git a/arch/arm/mach-omap2/usb-musb.c b/arch/arm/mach-omap2/usb-musb.c
> index bc89723..e4562b2 100644
> --- a/arch/arm/mach-omap2/usb-musb.c
> +++ b/arch/arm/mach-omap2/usb-musb.c
> @@ -82,16 +82,8 @@ void __init usb_musb_init(struct omap_musb_board_data *musb_board_data)
> musb_plat.mode = board_data->mode;
> musb_plat.extvbus = board_data->extvbus;
>
> - if (soc_is_am35xx()) {
> - oh_name = "am35x_otg_hs";
> - name = "musb-am35x";
> - } else if (cpu_is_ti81xx()) {
> - oh_name = "usb_otg_hs";
> - name = "musb-ti81xx";
> - } else {
> - oh_name = "usb_otg_hs";
> - name = "musb-omap2430";
> - }
> + oh_name = "usb_otg_hs";
> + name = "musb-omap2430";
>
> oh = omap_hwmod_lookup(oh_name);
> if (WARN(!oh, "%s: could not find omap_hwmod for %s\n",
> diff --git a/arch/arm/mach-omap2/usb.h b/arch/arm/mach-omap2/usb.h
> index 4ba2ae7..3395365 100644
> --- a/arch/arm/mach-omap2/usb.h
> +++ b/arch/arm/mach-omap2/usb.h
> @@ -68,5 +68,3 @@ extern void am35x_musb_reset(void);
> extern void am35x_musb_phy_power(u8 on);
> extern void am35x_musb_clear_irq(void);
> extern void am35x_set_mode(u8 musb_mode);
> -extern void ti81xx_musb_phy_power(u8 on);
> -
> --
> 2.1.4
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-omap" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
balbi
Attachment:
signature.asc
Description: Digital signature
