Hi, Several times I encountered issues with devices connected to the beagle board's OTG port (through a powered hub). (kernel 2.6.28-omap1). Today this happened again and I was lucky enough to be able to find the symptoms. Scenario: I had a file on a USB hard disk. This file was copied to an SD card. After copying the file was corrupted. Removing the card and hard disk and connecting them to my linux box allowed me to compare the SD and hard disk version (using cmp -l). There were differences on four places. Each difference was 4 bytes (32 bits) and occurred on a 4 byte boundary. I have no idea what causes it, but I strongly suspect the MUSB driver. A hauppauge usb tv card also does not work when connected to the hub, whereas the same card works without problem on a linksys NSLU2 (which also has an arm processor). Anyone suggestions? Patches ?? Frans. -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
