On Feb 23, 2009, at 4:08 PM, David Brownell wrote:
On Monday 23 February 2009, David Brownell wrote:
Perhaps something broke with Tony's RC1 merge?
The LEDs are broken for me as well.
Still works for me. Did you maybe not enable the twl4030
GPIO support in Kconfig?
Oh, and if you did *not*, please give this patch a try.
I've been meaning to test it.
Thanks, the patch works. Not enabling the TWL4030 GPIO was the issue
and this patch provides a good method of not having all the GPIOs fail
due to the failure of just one. Diego assisted in the test, as I had
first taken the approach of removing the failing GPIO.
- Dave
==============
Sometimes it's awkward to make sure that the array in the
platform_data handed to the leds-gpio driver has only valid
data ... some leds may not be always available, and coping
with that currently requires patching or rebuilding the array.
This patch fixes that by making it be OK to pass an invalid
GPIO (such as "-EINVAL") ... such table entries are skipped.
---
drivers/leds/leds-gpio.c | 12 +++++++++++-
1 file changed, 11 insertions(+), 1 deletion(-)
--- a/drivers/leds/leds-gpio.c
+++ b/drivers/leds/leds-gpio.c
@@ -90,13 +90,19 @@ static int gpio_led_probe(struct platfor
cur_led = &pdata->leds[i];
led_dat = &leds_data[i];
+ /* skip leds that aren't available */
+ led_dat->gpio = cur_led->gpio;
+ if (!gpio_is_valid(led_dat->gpio)) {
+ dev_dbg(&pdev->dev, "skipping %s\n", cur_led->name);
+ continue;
+ }
+
ret = gpio_request(cur_led->gpio, cur_led->name);
if (ret < 0)
goto err;
led_dat->cdev.name = cur_led->name;
led_dat->cdev.default_trigger = cur_led->default_trigger;
- led_dat->gpio = cur_led->gpio;
led_dat->can_sleep = gpio_cansleep(cur_led->gpio);
led_dat->active_low = cur_led->active_low;
if (pdata->gpio_blink_set) {
@@ -125,6 +131,8 @@ static int gpio_led_probe(struct platfor
err:
if (i > 0) {
for (i = i - 1; i >= 0; i--) {
+ if (!gpio_is_valid(leds_data[i].gpio))
+ continue;
led_classdev_unregister(&leds_data[i].cdev);
cancel_work_sync(&leds_data[i].work);
gpio_free(leds_data[i].gpio);
@@ -145,6 +153,8 @@ static int __devexit gpio_led_remove(str
leds_data = platform_get_drvdata(pdev);
for (i = 0; i < pdata->num_leds; i++) {
+ if (!gpio_is_valid(leds_data[i].gpio))
+ continue;
led_classdev_unregister(&leds_data[i].cdev);
cancel_work_sync(&leds_data[i].work);
gpio_free(leds_data[i].gpio);
--
To unsubscribe from this list: send the line "unsubscribe linux-
omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
