DCAN1 is routed to CAN port (J11) when Profile 1 is selected on the profile selection switch. Provide information for DCAN1 pins and node but keep it disabled by default. User has to manually enable it if Profile 1 is chosen. Signed-off-by: Roger Quadros <rogerq@xxxxxx> --- arch/arm/boot/dts/am335x-evm.dts | 13 +++++++++++++ 1 file changed, 13 insertions(+) diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts index e2156a5..7b7bd8f 100644 --- a/arch/arm/boot/dts/am335x-evm.dts +++ b/arch/arm/boot/dts/am335x-evm.dts @@ -307,6 +307,13 @@ 0x144 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* rmii1_ref_clk.mcasp1_axr3 */ >; }; + + dcan1_pins_default: dcan1_pins_default { + pinctrl-single,pins = < + 0x168 (PIN_OUTPUT | MUX_MODE2) /* uart0_ctsn.d_can1_tx */ + 0x16c (PIN_INPUT_PULLDOWN | MUX_MODE2) /* uart0_rtsn.d_can1_rx */ + >; + }; }; &uart0 { @@ -664,3 +671,9 @@ &aes { status = "okay"; }; + +&dcan1 { + pinctrl-names = "default"; + pinctrl-0 = <&dcan1_pins_default>; + status = "disabled"; /* Enable only if Profile 1 is selected */ +}; -- 1.8.3.2 -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html