Adding CPSW phy-id, CPSW and MDIO pinmux configuration for active and sleep states and enable them in board evm dts file. Signed-off-by: Mugunthan V N <mugunthanvnm@xxxxxx> --- Adding device tree entry for CPSW to make it work in Switch mode. Patches are tested on top of Nishanth's PM tree for v3.17 [1] and pushed my tree to [2]. Did a boot test with CPSW and ping test with suspend/resume, the boot logs on DRA72x EVM are posted at [3] This patch depends on the DRA7xx CPSW support patch series [4] and one driver patch (47276fc drivers: net:cpsw: fix probe_dt when only slave 1 is pinned out) which is already present in linux-next [1] git://github.com/nmenon/linux-2.6-playground.git testing/v3.17/cpu-idle-suspend-dra7-omap5-framework [2] git://git.ti.com/~mugunthanvnm/ti-linux-kernel/linux.git for-v3.19/dra72-evm-cpsw [3] http://pastebin.ubuntu.com/8800549/ [4] http://comments.gmane.org/gmane.linux.kernel/1810171 --- arch/arm/boot/dts/dra72-evm.dts | 73 +++++++++++++++++++++++++++++++++++++++++ 1 file changed, 73 insertions(+) diff --git a/arch/arm/boot/dts/dra72-evm.dts b/arch/arm/boot/dts/dra72-evm.dts index 5147023..b8ebf89 100644 --- a/arch/arm/boot/dts/dra72-evm.dts +++ b/arch/arm/boot/dts/dra72-evm.dts @@ -22,3 +22,76 @@ &uart1 { status = "okay"; }; + +&dra7_pmx_core { + cpsw_default: cpsw_default { + pinctrl-single,pins = < + /* Slave 2 */ + 0x198 (PIN_OUTPUT | MUX_MODE3) /* vin2a_d12.rgmii1_txc */ + 0x19c (PIN_OUTPUT | MUX_MODE3) /* vin2a_d13.rgmii1_tctl */ + 0x1a0 (PIN_OUTPUT | MUX_MODE3) /* vin2a_d14.rgmii1_td3 */ + 0x1a4 (PIN_OUTPUT | MUX_MODE3) /* vin2a_d15.rgmii1_td2 */ + 0x1a8 (PIN_OUTPUT | MUX_MODE3) /* vin2a_d16.rgmii1_td1 */ + 0x1ac (PIN_OUTPUT | MUX_MODE3) /* vin2a_d17.rgmii1_td0 */ + 0x1b0 (PIN_INPUT | MUX_MODE3) /* vin2a_d18.rgmii1_rclk */ + 0x1b4 (PIN_INPUT | MUX_MODE3) /* vin2a_d19.rgmii1_rctl */ + 0x1b8 (PIN_INPUT | MUX_MODE3) /* vin2a_d20.rgmii1_rd3 */ + 0x1bc (PIN_INPUT | MUX_MODE3) /* vin2a_d21.rgmii1_rd2 */ + 0x1c0 (PIN_INPUT | MUX_MODE3) /* vin2a_d22.rgmii1_rd1 */ + 0x1c4 (PIN_INPUT | MUX_MODE3) /* vin2a_d23.rgmii1_rd0 */ + >; + + }; + + cpsw_sleep: cpsw_sleep { + pinctrl-single,pins = < + /* Slave 2 */ + 0x198 (MUX_MODE15) + 0x19c (MUX_MODE15) + 0x1a0 (MUX_MODE15) + 0x1a4 (MUX_MODE15) + 0x1a8 (MUX_MODE15) + 0x1ac (MUX_MODE15) + 0x1b0 (MUX_MODE15) + 0x1b4 (MUX_MODE15) + 0x1b8 (MUX_MODE15) + 0x1bc (MUX_MODE15) + 0x1c0 (MUX_MODE15) + 0x1c4 (MUX_MODE15) + >; + }; + + davinci_mdio_default: davinci_mdio_default { + pinctrl-single,pins = < + /* MDIO */ + 0x23c (PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_d.mdio_d */ + 0x240 (PIN_INPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */ + >; + }; + + davinci_mdio_sleep: davinci_mdio_sleep { + pinctrl-single,pins = < + 0x23c (MUX_MODE15) + 0x240 (MUX_MODE15) + >; + }; +}; + +&mac { + status = "okay"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&cpsw_default>; + pinctrl-1 = <&cpsw_sleep>; +}; + +&cpsw_emac1 { + phy_id = <&davinci_mdio>, <3>; + phy-mode = "rgmii"; +}; + +&davinci_mdio { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&davinci_mdio_default>; + pinctrl-1 = <&davinci_mdio_sleep>; + active_slave = <1>; +}; -- 2.1.2.484.g13da0fc -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
