Looks good. We will do some internal validation and push this change to omapzoom tree. Thank you, Best regards, Hari > -----Original Message----- > From: Felipe Contreras [mailto:felipe.contreras@xxxxxxxxx] > Sent: Sunday, February 22, 2009 3:32 AM > To: linux-omap@xxxxxxxxxxxxxxx > Cc: Hiroshi DOYU; Kanigeri, Hari; ameya.palande@xxxxxxxxx; Felipe > Contreras > Subject: [PATCH v2 2/4] dsp-bridge: remove UTIL_Wait wrapper > > Wrappers only hurt readability, use native kernel functions instead > (udelay, mdelay). > > Also remove useless defines. > > Signed-off-by: Felipe Contreras <felipe.contreras@xxxxxxxxx> > --- > arch/arm/plat-omap/include/dspbridge/util.h | 33 ---------------------- > ----- > drivers/dsp/bridge/wmd/_tiomap_pwr.h | 4 --- > drivers/dsp/bridge/wmd/_tiomap_util.h | 1 - > drivers/dsp/bridge/wmd/tiomap3430.c | 10 ++++---- > drivers/dsp/bridge/wmd/tiomap3430_pwr.c | 4 +- > drivers/dsp/bridge/wmd/tiomap_sm.c | 4 +- > 6 files changed, 9 insertions(+), 47 deletions(-) > > diff --git a/arch/arm/plat-omap/include/dspbridge/util.h b/arch/arm/plat- > omap/include/dspbridge/util.h > index 9d8842a..e6815ca 100644 > --- a/arch/arm/plat-omap/include/dspbridge/util.h > +++ b/arch/arm/plat-omap/include/dspbridge/util.h > @@ -26,7 +26,6 @@ > * UTIL_Exit > * UTIL_GetSysInfo > * UTIL_Init > - * UTIL_Wait > */ > > #ifndef _UTIL_H > @@ -120,36 +119,4 @@ > return true; > } > > -/* > - * ======== UTIL_Wait ======== > - * Purpose: > - * This fucntion busy waits given a certain number of micro seconds > - * independent of the processor speed. This is acheived by the > - * OEM functions QueryPerformanceCounter and > QueryPerformanceFrequency. > - * Parameters: > - * u32 Number of Micro seconds to busy wait > - * Returns: > - * Nothing > - * Requires: > - * UTIL_Initalized. > - * Ensures: > - * Busy waits x Micro seconds or Sleeps X milli seconds; in that > - * case, it is a blocking call there will be a context switching > - * hence it may not represent the absolute busy wait time. > - */ > - static inline void UTIL_Wait(IN u32 dwMicroSeconds) > - { > - if (dwMicroSeconds / 1000 <= 1) { > - /* <= 1 millisecond delay */ > - udelay(dwMicroSeconds); > - } else if (dwMicroSeconds * HZ / 1000000 <= 1) { > - /* <= 10 millisecond delay */ > - mdelay(dwMicroSeconds / 1000); > - } else { > - /* > 10 millisecond delay */ > - set_current_state(TASK_INTERRUPTIBLE); > - schedule_timeout(dwMicroSeconds * HZ / 1000000); > - } > - } > - > #endif /* _UTIL_H */ > diff --git a/drivers/dsp/bridge/wmd/_tiomap_pwr.h > b/drivers/dsp/bridge/wmd/_tiomap_pwr.h > index 15ff2d3..8a7cf1b 100644 > --- a/drivers/dsp/bridge/wmd/_tiomap_pwr.h > +++ b/drivers/dsp/bridge/wmd/_tiomap_pwr.h > @@ -28,10 +28,6 @@ > #ifndef _TIOMAP_PWR_ > #define _TIOMAP_PWR_ > > -/* Wait time between MBX and IDLE checks for PWR */ > -#define PWR_WAIT_USECS 500 > -#define PWR_WAIT_MSECS 50 > - > /* > * ======== WakeDSP ========= > * Wakes up the DSP from DeepSleep > diff --git a/drivers/dsp/bridge/wmd/_tiomap_util.h > b/drivers/dsp/bridge/wmd/_tiomap_util.h > index b655409..47e1e5d 100644 > --- a/drivers/dsp/bridge/wmd/_tiomap_util.h > +++ b/drivers/dsp/bridge/wmd/_tiomap_util.h > @@ -30,7 +30,6 @@ > > /* Time out Values in uSeconds*/ > #define TIHELEN_ACKTIMEOUT 10000 > -#define TIHELEN_WRITE_DELAY 10 > > /* Time delay for HOM->SAM transition. */ > #define WAIT_SAM 1000000 /* in usec (1000 millisec) */ > diff --git a/drivers/dsp/bridge/wmd/tiomap3430.c > b/drivers/dsp/bridge/wmd/tiomap3430.c > index 94ad786..670ca14 100644 > --- a/drivers/dsp/bridge/wmd/tiomap3430.c > +++ b/drivers/dsp/bridge/wmd/tiomap3430.c > @@ -459,9 +459,9 @@ static DSP_STATUS WMD_BRD_Start(struct WMD_DEV_CONTEXT > *hDevContext, > /* Reset and Unreset the RST2, so that BOOTADDR is copied to > * IVA2 SYSC register */ > HW_RST_Reset(resources.dwPrmBase, HW_RST2_IVA2); > - UTIL_Wait(100); > + udelay(100); > HW_RST_UnReset(resources.dwPrmBase, HW_RST2_IVA2); > - UTIL_Wait(100); > + udelay(100); > DBG_Trace(DBG_LEVEL6, "WMD_BRD_Start 0 ****** \n"); > GetHWRegs(resources.dwPrmBase, resources.dwCmBase); > /* Disbale the DSP MMU */ > @@ -736,7 +736,7 @@ static DSP_STATUS WMD_BRD_Stop(struct WMD_DEV_CONTEXT > *hDevContext) > > IO_InterruptDSP2(pDevContext, MBX_PM_DSPIDLE); > > - UTIL_Wait(10000); /* 10 msec */ > + mdelay(10); > > GetHWRegs(resources.dwPrmBase, resources.dwCmBase); > > @@ -1052,7 +1052,7 @@ static DSP_STATUS WMD_DEV_Create(OUT struct > WMD_DEV_CONTEXT **ppDevContext, > "WMD_DEV_create:Reset mail box and " > "enable the clock Fail\n"); > } > - UTIL_Wait(5); > + udelay(5); > /* 24xx-Linux MMU address is obtained from the host > * resources struct */ > pDevContext->dwDSPMmuBase = resources.dwDmmuBase; > @@ -2171,7 +2171,7 @@ bool WaitForStart(struct WMD_DEV_CONTEXT > *pDevContext, u32 dwSyncAddr) > > /* Wait for response from board */ > while (*((volatile u16 *)dwSyncAddr) && --usCount) > - UTIL_Wait(TIHELEN_WRITE_DELAY); > + udelay(10); > > /* If timed out: return FALSE */ > if (!usCount) { > diff --git a/drivers/dsp/bridge/wmd/tiomap3430_pwr.c > b/drivers/dsp/bridge/wmd/tiomap3430_pwr.c > index f3e7645..95a89b3 100644 > --- a/drivers/dsp/bridge/wmd/tiomap3430_pwr.c > +++ b/drivers/dsp/bridge/wmd/tiomap3430_pwr.c > @@ -122,7 +122,7 @@ DSP_STATUS handle_hibernation_fromDSP(struct > WMD_DEV_CONTEXT *pDevContext) > /* Wait for DSP to move into Off state, how much time should > * we wait? */ > while ((pwrState != HW_PWR_STATE_OFF) && --usCount) { > - UTIL_Wait(PWR_WAIT_USECS); > + udelay(500); > HW_PWR_IVA2StateGet(resources.dwPrmBase, HW_PWR_DOMAIN_DSP, > &pwrState); > } > @@ -243,7 +243,7 @@ DSP_STATUS SleepDSP(struct WMD_DEV_CONTEXT > *pDevContext, IN u32 dwCmd, > /* Wait for DSP to move into Standby state, how much time > * should we wait?*/ > while ((pwrState != targetPwrState) && --usCount) { > - UTIL_Wait(PWR_WAIT_USECS); > + udelay(500); > HW_PWR_IVA2StateGet(resources.dwPrmBase, HW_PWR_DOMAIN_DSP, > &pwrState); > } > diff --git a/drivers/dsp/bridge/wmd/tiomap_sm.c > b/drivers/dsp/bridge/wmd/tiomap_sm.c > index 9bc5b54..2f381c8 100644 > --- a/drivers/dsp/bridge/wmd/tiomap_sm.c > +++ b/drivers/dsp/bridge/wmd/tiomap_sm.c > @@ -120,7 +120,7 @@ DSP_STATUS CHNLSM_EnableInterrupt(struct > WMD_DEV_CONTEXT *hDevContext) > hwStatus = HW_MBOX_MsgRead(resources.dwMboxBase, > MBOX_ARM2DSP, &mbxValue); > numMbxMsg--; > - UTIL_Wait(10); > + udelay(10); > > HW_MBOX_EventAck(resources.dwMboxBase, MBOX_ARM2DSP, > HW_MBOX_U1_DSP1, > @@ -217,7 +217,7 @@ DSP_STATUS CHNLSM_InterruptDSP(struct WMD_DEV_CONTEXT > *hDevContext) > hwStatus = HW_MBOX_IsFull(resources.dwMboxBase, > MBOX_ARM2DSP, &mbxFull); > if (mbxFull) > - UTIL_Wait(1000); /* wait for 1 ms) */ > + mdelay(1); > else > break; > } > -- > 1.6.1.3 > -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
