Commit 705814b5ea6f ("ARM: OMAP4+: PM: Consolidate OMAP4 PM code to
re-use it for OMAP5")
Moved logic generic for OMAP5+ as part of the init routine by
introducing omap4_pm_init. However, the patch left the powerdomain
initial setup, an unused omap4430 es1.0 check and a spurious log
"Power Management for TI OMAP4." in the original code.
Remove the duplicate code which is already present in omap4_pm_init from
omap4_init_static_deps.
As part of this change, also move the u-boot version print out of the
static dependency function to the omap4_pm_init function.
Fixes: 705814b5ea6f ("ARM: OMAP4+: PM: Consolidate OMAP4 PM code to re-use it for OMAP5")
Signed-off-by: Nishanth Menon <nm@xxxxxx>
---
arch/arm/mach-omap2/pm44xx.c | 29 +++++++++--------------------
1 file changed, 9 insertions(+), 20 deletions(-)
diff --git a/arch/arm/mach-omap2/pm44xx.c b/arch/arm/mach-omap2/pm44xx.c
index 503097c..e7f823b 100644
--- a/arch/arm/mach-omap2/pm44xx.c
+++ b/arch/arm/mach-omap2/pm44xx.c
@@ -160,26 +160,6 @@ static inline int omap4_init_static_deps(void)
struct clockdomain *ducati_clkdm, *l3_2_clkdm;
int ret = 0;
- if (omap_rev() == OMAP4430_REV_ES1_0) {
- WARN(1, "Power Management not supported on OMAP4430 ES1.0\n");
- return -ENODEV;
- }
-
- pr_err("Power Management for TI OMAP4.\n");
- /*
- * OMAP4 chip PM currently works only with certain (newer)
- * versions of bootloaders. This is due to missing code in the
- * kernel to properly reset and initialize some devices.
- * http://www.spinics.net/lists/arm-kernel/msg218641.html
- */
- pr_warn("OMAP4 PM: u-boot >= v2012.07 is required for full PM support\n");
-
- ret = pwrdm_for_each(pwrdms_setup, NULL);
- if (ret) {
- pr_err("Failed to setup powerdomains\n");
- return ret;
- }
-
/*
* The dynamic dependency between MPUSS -> MEMIF and
* MPUSS -> L4_PER/L3_* and DUCATI -> L3_* doesn't work as
@@ -272,6 +252,15 @@ int __init omap4_pm_init(void)
pr_info("Power Management for TI OMAP4+ devices.\n");
+ /*
+ * OMAP4 chip PM currently works only with certain (newer)
+ * versions of bootloaders. This is due to missing code in the
+ * kernel to properly reset and initialize some devices.
+ * http://www.spinics.net/lists/arm-kernel/msg218641.html
+ */
+ if (cpu_is_omap44xx())
+ pr_warn("OMAP4 PM: u-boot >= v2012.07 is required for full PM support\n");
+
ret = pwrdm_for_each(pwrdms_setup, NULL);
if (ret) {
pr_err("Failed to setup powerdomains.\n");
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
