Register with kernel poweroff handler instead of setting pm_power_off
directly. Always use register_power_off_handler_simple as there is no
indication that more than one poweroff handler is registered.
If the poweroff handler only resets the system or puts the CPU in sleep mode,
select the fallback priority to indicate that the poweroff handler is one
of last resort. If the poweroff handler powers off the system, select the
default priority.
Cc: Russell King <linux@xxxxxxxxxxxxxxxx>
Signed-off-by: Guenter Roeck <linux@xxxxxxxxxxxx>
---
- Use defines to specify poweroff handler priorities
- Drop changes in arch/arm/mach-at91/setup.c (file removed upstream)
arch/arm/kernel/psci.c | 3 ++-
arch/arm/mach-at91/board-gsia18s.c | 3 ++-
arch/arm/mach-bcm/board_bcm2835.c | 3 ++-
arch/arm/mach-cns3xxx/cns3420vb.c | 3 ++-
arch/arm/mach-cns3xxx/core.c | 3 ++-
arch/arm/mach-highbank/highbank.c | 3 ++-
arch/arm/mach-imx/mach-mx31moboard.c | 3 ++-
arch/arm/mach-iop32x/em7210.c | 3 ++-
arch/arm/mach-iop32x/glantank.c | 3 ++-
arch/arm/mach-iop32x/iq31244.c | 3 ++-
arch/arm/mach-iop32x/n2100.c | 3 ++-
arch/arm/mach-ixp4xx/dsmg600-setup.c | 3 ++-
arch/arm/mach-ixp4xx/nas100d-setup.c | 3 ++-
arch/arm/mach-ixp4xx/nslu2-setup.c | 3 ++-
arch/arm/mach-omap2/board-omap3touchbook.c | 3 ++-
arch/arm/mach-orion5x/board-mss2.c | 3 ++-
arch/arm/mach-orion5x/dns323-setup.c | 9 ++++++---
arch/arm/mach-orion5x/kurobox_pro-setup.c | 3 ++-
arch/arm/mach-orion5x/ls-chl-setup.c | 3 ++-
arch/arm/mach-orion5x/ls_hgl-setup.c | 3 ++-
arch/arm/mach-orion5x/lsmini-setup.c | 3 ++-
arch/arm/mach-orion5x/mv2120-setup.c | 3 ++-
arch/arm/mach-orion5x/net2big-setup.c | 3 ++-
arch/arm/mach-orion5x/terastation_pro2-setup.c | 3 ++-
arch/arm/mach-orion5x/ts209-setup.c | 3 ++-
arch/arm/mach-orion5x/ts409-setup.c | 3 ++-
arch/arm/mach-pxa/corgi.c | 3 ++-
arch/arm/mach-pxa/mioa701.c | 3 ++-
arch/arm/mach-pxa/poodle.c | 3 ++-
arch/arm/mach-pxa/spitz.c | 3 ++-
arch/arm/mach-pxa/tosa.c | 3 ++-
arch/arm/mach-pxa/viper.c | 3 ++-
arch/arm/mach-pxa/z2.c | 7 ++++---
arch/arm/mach-pxa/zeus.c | 7 ++++---
arch/arm/mach-s3c24xx/mach-gta02.c | 3 ++-
arch/arm/mach-s3c24xx/mach-jive.c | 3 ++-
arch/arm/mach-s3c24xx/mach-vr1000.c | 3 ++-
arch/arm/mach-s3c64xx/mach-smartq.c | 3 ++-
arch/arm/mach-sa1100/generic.c | 3 ++-
arch/arm/mach-sa1100/simpad.c | 3 ++-
arch/arm/mach-u300/regulator.c | 3 ++-
arch/arm/mach-vt8500/vt8500.c | 3 ++-
arch/arm/xen/enlighten.c | 3 ++-
43 files changed, 94 insertions(+), 49 deletions(-)
diff --git a/arch/arm/kernel/psci.c b/arch/arm/kernel/psci.c
index f73891b..4917c99 100644
--- a/arch/arm/kernel/psci.c
+++ b/arch/arm/kernel/psci.c
@@ -264,7 +264,8 @@ static int psci_0_2_init(struct device_node *np)
arm_pm_restart = psci_sys_reset;
- pm_power_off = psci_sys_poweroff;
+ register_power_off_handler_simple(psci_sys_poweroff,
+ POWEROFF_PRIORITY_DEFAULT);
out_put_node:
of_node_put(np);
diff --git a/arch/arm/mach-at91/board-gsia18s.c b/arch/arm/mach-at91/board-gsia18s.c
index bf5cc55..cb5d1c3 100644
--- a/arch/arm/mach-at91/board-gsia18s.c
+++ b/arch/arm/mach-at91/board-gsia18s.c
@@ -521,7 +521,8 @@ static void gsia18s_power_off(void)
static int __init gsia18s_power_off_init(void)
{
- pm_power_off = gsia18s_power_off;
+ register_power_off_handler_simple(gsia18s_power_off,
+ POWEROFF_PRIORITY_DEFAULT);
return 0;
}
diff --git a/arch/arm/mach-bcm/board_bcm2835.c b/arch/arm/mach-bcm/board_bcm2835.c
index 70f2f39..307ebc1 100644
--- a/arch/arm/mach-bcm/board_bcm2835.c
+++ b/arch/arm/mach-bcm/board_bcm2835.c
@@ -111,7 +111,8 @@ static void __init bcm2835_init(void)
bcm2835_setup_restart();
if (wdt_regs)
- pm_power_off = bcm2835_power_off;
+ register_power_off_handler_simple(bcm2835_power_off,
+ POWEROFF_PRIORITY_FALLBACK);
bcm2835_init_clocks();
diff --git a/arch/arm/mach-cns3xxx/cns3420vb.c b/arch/arm/mach-cns3xxx/cns3420vb.c
index 6428bcc7..3f48979 100644
--- a/arch/arm/mach-cns3xxx/cns3420vb.c
+++ b/arch/arm/mach-cns3xxx/cns3420vb.c
@@ -224,7 +224,8 @@ static void __init cns3420_init(void)
cns3xxx_ahci_init();
cns3xxx_sdhci_init();
- pm_power_off = cns3xxx_power_off;
+ register_power_off_handler_simple(cns3xxx_power_off,
+ POWEROFF_PRIORITY_DEFAULT);
}
static struct map_desc cns3420_io_desc[] __initdata = {
diff --git a/arch/arm/mach-cns3xxx/core.c b/arch/arm/mach-cns3xxx/core.c
index 4e9837d..fc0b9e0 100644
--- a/arch/arm/mach-cns3xxx/core.c
+++ b/arch/arm/mach-cns3xxx/core.c
@@ -386,7 +386,8 @@ static void __init cns3xxx_init(void)
cns3xxx_pwr_soft_rst(CNS3XXX_PWR_SOFTWARE_RST(SDIO));
}
- pm_power_off = cns3xxx_power_off;
+ register_power_off_handler_simple(cns3xxx_power_off,
+ POWEROFF_PRIORITY_DEFAULT);
of_platform_populate(NULL, of_default_bus_match_table,
cns3xxx_auxdata, NULL);
diff --git a/arch/arm/mach-highbank/highbank.c b/arch/arm/mach-highbank/highbank.c
index 8c35ae4..87958f9a 100644
--- a/arch/arm/mach-highbank/highbank.c
+++ b/arch/arm/mach-highbank/highbank.c
@@ -155,7 +155,8 @@ static void __init highbank_init(void)
sregs_base = of_iomap(np, 0);
WARN_ON(!sregs_base);
- pm_power_off = highbank_power_off;
+ register_power_off_handler_simple(highbank_power_off,
+ POWEROFF_PRIORITY_FALLBACK);
highbank_pm_init();
bus_register_notifier(&platform_bus_type, &highbank_platform_nb);
diff --git a/arch/arm/mach-imx/mach-mx31moboard.c b/arch/arm/mach-imx/mach-mx31moboard.c
index bb6f8a5..736937b 100644
--- a/arch/arm/mach-imx/mach-mx31moboard.c
+++ b/arch/arm/mach-imx/mach-mx31moboard.c
@@ -559,7 +559,8 @@ static void __init mx31moboard_init(void)
imx_add_platform_device("imx_mc13783", 0, NULL, 0, NULL, 0);
- pm_power_off = mx31moboard_poweroff;
+ register_power_off_handler_simple(mx31moboard_poweroff,
+ POWEROFF_PRIORITY_DEFAULT);
switch (mx31moboard_baseboard) {
case MX31NOBOARD:
diff --git a/arch/arm/mach-iop32x/em7210.c b/arch/arm/mach-iop32x/em7210.c
index 77e1ff0..8f93266 100644
--- a/arch/arm/mach-iop32x/em7210.c
+++ b/arch/arm/mach-iop32x/em7210.c
@@ -201,7 +201,8 @@ static int __init em7210_request_gpios(void)
return 0;
}
- pm_power_off = em7210_power_off;
+ register_power_off_handler_simple(em7210_power_off,
+ POWEROFF_PRIORITY_DEFAULT);
return 0;
}
diff --git a/arch/arm/mach-iop32x/glantank.c b/arch/arm/mach-iop32x/glantank.c
index 547b234..8d12aa1 100644
--- a/arch/arm/mach-iop32x/glantank.c
+++ b/arch/arm/mach-iop32x/glantank.c
@@ -199,7 +199,8 @@ static void __init glantank_init_machine(void)
i2c_register_board_info(0, glantank_i2c_devices,
ARRAY_SIZE(glantank_i2c_devices));
- pm_power_off = glantank_power_off;
+ register_power_off_handler_simple(glantank_power_off,
+ POWEROFF_PRIORITY_DEFAULT);
}
MACHINE_START(GLANTANK, "GLAN Tank")
diff --git a/arch/arm/mach-iop32x/iq31244.c b/arch/arm/mach-iop32x/iq31244.c
index 0e1392b..7c09bbe 100644
--- a/arch/arm/mach-iop32x/iq31244.c
+++ b/arch/arm/mach-iop32x/iq31244.c
@@ -293,7 +293,8 @@ static void __init iq31244_init_machine(void)
platform_device_register(&iop3xx_dma_1_channel);
if (is_ep80219())
- pm_power_off = ep80219_power_off;
+ register_power_off_handler_simple(ep80219_power_off,
+ POWEROFF_PRIORITY_DEFAULT);
if (!is_80219())
platform_device_register(&iop3xx_aau_channel);
diff --git a/arch/arm/mach-iop32x/n2100.c b/arch/arm/mach-iop32x/n2100.c
index c1cd80e..ee949c5 100644
--- a/arch/arm/mach-iop32x/n2100.c
+++ b/arch/arm/mach-iop32x/n2100.c
@@ -356,7 +356,8 @@ static void __init n2100_init_machine(void)
i2c_register_board_info(0, n2100_i2c_devices,
ARRAY_SIZE(n2100_i2c_devices));
- pm_power_off = n2100_power_off;
+ register_power_off_handler_simple(n2100_power_off,
+ POWEROFF_PRIORITY_DEFAULT);
}
MACHINE_START(N2100, "Thecus N2100")
diff --git a/arch/arm/mach-ixp4xx/dsmg600-setup.c b/arch/arm/mach-ixp4xx/dsmg600-setup.c
index 43ee06d..ae3dafa 100644
--- a/arch/arm/mach-ixp4xx/dsmg600-setup.c
+++ b/arch/arm/mach-ixp4xx/dsmg600-setup.c
@@ -281,7 +281,8 @@ static void __init dsmg600_init(void)
platform_add_devices(dsmg600_devices, ARRAY_SIZE(dsmg600_devices));
- pm_power_off = dsmg600_power_off;
+ register_power_off_handler_simple(dsmg600_power_off,
+ POWEROFF_PRIORITY_DEFAULT);
}
MACHINE_START(DSMG600, "D-Link DSM-G600 RevA")
diff --git a/arch/arm/mach-ixp4xx/nas100d-setup.c b/arch/arm/mach-ixp4xx/nas100d-setup.c
index 4e0f762..a8062db 100644
--- a/arch/arm/mach-ixp4xx/nas100d-setup.c
+++ b/arch/arm/mach-ixp4xx/nas100d-setup.c
@@ -292,7 +292,8 @@ static void __init nas100d_init(void)
platform_add_devices(nas100d_devices, ARRAY_SIZE(nas100d_devices));
- pm_power_off = nas100d_power_off;
+ register_power_off_handler_simple(nas100d_power_off,
+ POWEROFF_PRIORITY_DEFAULT);
if (request_irq(gpio_to_irq(NAS100D_RB_GPIO), &nas100d_reset_handler,
IRQF_TRIGGER_LOW, "NAS100D reset button", NULL) < 0) {
diff --git a/arch/arm/mach-ixp4xx/nslu2-setup.c b/arch/arm/mach-ixp4xx/nslu2-setup.c
index 88c025f..a95f727 100644
--- a/arch/arm/mach-ixp4xx/nslu2-setup.c
+++ b/arch/arm/mach-ixp4xx/nslu2-setup.c
@@ -262,7 +262,8 @@ static void __init nslu2_init(void)
platform_add_devices(nslu2_devices, ARRAY_SIZE(nslu2_devices));
- pm_power_off = nslu2_power_off;
+ register_power_off_handler_simple(nslu2_power_off,
+ POWEROFF_PRIORITY_DEFAULT);
if (request_irq(gpio_to_irq(NSLU2_RB_GPIO), &nslu2_reset_handler,
IRQF_TRIGGER_LOW, "NSLU2 reset button", NULL) < 0) {
diff --git a/arch/arm/mach-omap2/board-omap3touchbook.c b/arch/arm/mach-omap2/board-omap3touchbook.c
index a01993e..22347b8 100644
--- a/arch/arm/mach-omap2/board-omap3touchbook.c
+++ b/arch/arm/mach-omap2/board-omap3touchbook.c
@@ -344,7 +344,8 @@ static void __init omap3_touchbook_init(void)
{
omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
- pm_power_off = omap3_touchbook_poweroff;
+ register_power_off_handler_simple(omap3_touchbook_poweroff,
+ POWEROFF_PRIORITY_DEFAULT);
if (system_rev >= 0x20 && system_rev <= 0x34301000) {
omap_mux_init_gpio(23, OMAP_PIN_INPUT);
diff --git a/arch/arm/mach-orion5x/board-mss2.c b/arch/arm/mach-orion5x/board-mss2.c
index 66f9c3b..7b46868 100644
--- a/arch/arm/mach-orion5x/board-mss2.c
+++ b/arch/arm/mach-orion5x/board-mss2.c
@@ -86,5 +86,6 @@ static void mss2_power_off(void)
void __init mss2_init(void)
{
/* register mss2 specific power-off method */
- pm_power_off = mss2_power_off;
+ register_power_off_handler_simple(mss2_power_off,
+ POWEROFF_PRIORITY_FALLBACK);
}
diff --git a/arch/arm/mach-orion5x/dns323-setup.c b/arch/arm/mach-orion5x/dns323-setup.c
index 09d2a26..979c696 100644
--- a/arch/arm/mach-orion5x/dns323-setup.c
+++ b/arch/arm/mach-orion5x/dns323-setup.c
@@ -669,7 +669,8 @@ static void __init dns323_init(void)
if (gpio_request(DNS323_GPIO_POWER_OFF, "POWEROFF") != 0 ||
gpio_direction_output(DNS323_GPIO_POWER_OFF, 0) != 0)
pr_err("DNS-323: failed to setup power-off GPIO\n");
- pm_power_off = dns323a_power_off;
+ register_power_off_handler_simple(dns323a_power_off,
+ POWEROFF_PRIORITY_DEFAULT);
break;
case DNS323_REV_B1:
/* 5182 built-in SATA init */
@@ -686,7 +687,8 @@ static void __init dns323_init(void)
if (gpio_request(DNS323_GPIO_POWER_OFF, "POWEROFF") != 0 ||
gpio_direction_output(DNS323_GPIO_POWER_OFF, 0) != 0)
pr_err("DNS-323: failed to setup power-off GPIO\n");
- pm_power_off = dns323b_power_off;
+ register_power_off_handler_simple(dns323b_power_off,
+ POWEROFF_PRIORITY_DEFAULT);
break;
case DNS323_REV_C1:
/* 5182 built-in SATA init */
@@ -696,7 +698,8 @@ static void __init dns323_init(void)
if (gpio_request(DNS323C_GPIO_POWER_OFF, "POWEROFF") != 0 ||
gpio_direction_output(DNS323C_GPIO_POWER_OFF, 0) != 0)
pr_err("DNS-323: failed to setup power-off GPIO\n");
- pm_power_off = dns323c_power_off;
+ register_power_off_handler_simple(dns323c_power_off,
+ POWEROFF_PRIORITY_DEFAULT);
/* Now, -this- should theorically be done by the sata_mv driver
* once I figure out what's going on there. Maybe the behaviour
diff --git a/arch/arm/mach-orion5x/kurobox_pro-setup.c b/arch/arm/mach-orion5x/kurobox_pro-setup.c
index fe6a48a..1004d2ad 100644
--- a/arch/arm/mach-orion5x/kurobox_pro-setup.c
+++ b/arch/arm/mach-orion5x/kurobox_pro-setup.c
@@ -376,7 +376,8 @@ static void __init kurobox_pro_init(void)
i2c_register_board_info(0, &kurobox_pro_i2c_rtc, 1);
/* register Kurobox Pro specific power-off method */
- pm_power_off = kurobox_pro_power_off;
+ register_power_off_handler_simple(kurobox_pro_power_off,
+ POWEROFF_PRIORITY_DEFAULT);
}
#ifdef CONFIG_MACH_KUROBOX_PRO
diff --git a/arch/arm/mach-orion5x/ls-chl-setup.c b/arch/arm/mach-orion5x/ls-chl-setup.c
index 028ea03..b1e161a 100644
--- a/arch/arm/mach-orion5x/ls-chl-setup.c
+++ b/arch/arm/mach-orion5x/ls-chl-setup.c
@@ -312,7 +312,8 @@ static void __init lschl_init(void)
gpio_set_value(LSCHL_GPIO_USB_POWER, 1);
/* register power-off method */
- pm_power_off = lschl_power_off;
+ register_power_off_handler_simple(lschl_power_off,
+ POWEROFF_PRIORITY_FALLBACK);
pr_info("%s: finished\n", __func__);
}
diff --git a/arch/arm/mach-orion5x/ls_hgl-setup.c b/arch/arm/mach-orion5x/ls_hgl-setup.c
index 32b7129..c77e5a0 100644
--- a/arch/arm/mach-orion5x/ls_hgl-setup.c
+++ b/arch/arm/mach-orion5x/ls_hgl-setup.c
@@ -259,7 +259,8 @@ static void __init ls_hgl_init(void)
gpio_set_value(LS_HGL_GPIO_USB_POWER, 1);
/* register power-off method */
- pm_power_off = ls_hgl_power_off;
+ register_power_off_handler_simple(ls_hgl_power_off,
+ POWEROFF_PRIORITY_FALLBACK);
pr_info("%s: finished\n", __func__);
}
diff --git a/arch/arm/mach-orion5x/lsmini-setup.c b/arch/arm/mach-orion5x/lsmini-setup.c
index a6493e7..9235353 100644
--- a/arch/arm/mach-orion5x/lsmini-setup.c
+++ b/arch/arm/mach-orion5x/lsmini-setup.c
@@ -260,7 +260,8 @@ static void __init lsmini_init(void)
gpio_set_value(LSMINI_GPIO_USB_POWER, 1);
/* register power-off method */
- pm_power_off = lsmini_power_off;
+ register_power_off_handler_simple(lsmini_power_off,
+ POWEROFF_PRIORITY_FALLBACK);
pr_info("%s: finished\n", __func__);
}
diff --git a/arch/arm/mach-orion5x/mv2120-setup.c b/arch/arm/mach-orion5x/mv2120-setup.c
index e032f01..897f1f6 100644
--- a/arch/arm/mach-orion5x/mv2120-setup.c
+++ b/arch/arm/mach-orion5x/mv2120-setup.c
@@ -225,7 +225,8 @@ static void __init mv2120_init(void)
if (gpio_request(MV2120_GPIO_POWER_OFF, "POWEROFF") != 0 ||
gpio_direction_output(MV2120_GPIO_POWER_OFF, 1) != 0)
pr_err("mv2120: failed to setup power-off GPIO\n");
- pm_power_off = mv2120_power_off;
+ register_power_off_handler_simple(mv2120_power_off,
+ POWEROFF_PRIORITY_DEFAULT);
}
/* Warning: HP uses a wrong mach-type (=526) in their bootloader */
diff --git a/arch/arm/mach-orion5x/net2big-setup.c b/arch/arm/mach-orion5x/net2big-setup.c
index ba73dc7..f783ad7 100644
--- a/arch/arm/mach-orion5x/net2big-setup.c
+++ b/arch/arm/mach-orion5x/net2big-setup.c
@@ -413,7 +413,8 @@ static void __init net2big_init(void)
if (gpio_request(NET2BIG_GPIO_POWER_OFF, "power-off") == 0 &&
gpio_direction_output(NET2BIG_GPIO_POWER_OFF, 0) == 0)
- pm_power_off = net2big_power_off;
+ register_power_off_handler_simple(net2big_power_off,
+ POWEROFF_PRIORITY_DEFAULT);
else
pr_err("net2big: failed to configure power-off GPIO\n");
diff --git a/arch/arm/mach-orion5x/terastation_pro2-setup.c b/arch/arm/mach-orion5x/terastation_pro2-setup.c
index 1208674..4c16209 100644
--- a/arch/arm/mach-orion5x/terastation_pro2-setup.c
+++ b/arch/arm/mach-orion5x/terastation_pro2-setup.c
@@ -353,7 +353,8 @@ static void __init tsp2_init(void)
i2c_register_board_info(0, &tsp2_i2c_rtc, 1);
/* register Terastation Pro II specific power-off method */
- pm_power_off = tsp2_power_off;
+ register_power_off_handler_simple(tsp2_power_off,
+ POWEROFF_PRIORITY_DEFAULT);
}
MACHINE_START(TERASTATION_PRO2, "Buffalo Terastation Pro II/Live")
diff --git a/arch/arm/mach-orion5x/ts209-setup.c b/arch/arm/mach-orion5x/ts209-setup.c
index c725b7c..7b46830 100644
--- a/arch/arm/mach-orion5x/ts209-setup.c
+++ b/arch/arm/mach-orion5x/ts209-setup.c
@@ -318,7 +318,8 @@ static void __init qnap_ts209_init(void)
i2c_register_board_info(0, &qnap_ts209_i2c_rtc, 1);
/* register tsx09 specific power-off method */
- pm_power_off = qnap_tsx09_power_off;
+ register_power_off_handler_simple(qnap_tsx09_power_off,
+ POWEROFF_PRIORITY_DEFAULT);
}
MACHINE_START(TS209, "QNAP TS-109/TS-209")
diff --git a/arch/arm/mach-orion5x/ts409-setup.c b/arch/arm/mach-orion5x/ts409-setup.c
index cf2ab53..d36949a 100644
--- a/arch/arm/mach-orion5x/ts409-setup.c
+++ b/arch/arm/mach-orion5x/ts409-setup.c
@@ -307,7 +307,8 @@ static void __init qnap_ts409_init(void)
platform_device_register(&ts409_leds);
/* register tsx09 specific power-off method */
- pm_power_off = qnap_tsx09_power_off;
+ register_power_off_handler_simple(qnap_tsx09_power_off,
+ POWEROFF_PRIORITY_DEFAULT);
}
MACHINE_START(TS409, "QNAP TS-409")
diff --git a/arch/arm/mach-pxa/corgi.c b/arch/arm/mach-pxa/corgi.c
index 06022b2..82ef5ad 100644
--- a/arch/arm/mach-pxa/corgi.c
+++ b/arch/arm/mach-pxa/corgi.c
@@ -718,7 +718,8 @@ static void corgi_restart(enum reboot_mode mode, const char *cmd)
static void __init corgi_init(void)
{
- pm_power_off = corgi_poweroff;
+ register_power_off_handler_simple(corgi_poweroff,
+ POWEROFF_PRIORITY_FALLBACK);
/* Stop 3.6MHz and drive HIGH to PCMCIA and CS */
PCFR |= PCFR_OPDE;
diff --git a/arch/arm/mach-pxa/mioa701.c b/arch/arm/mach-pxa/mioa701.c
index 29997bd..7a29258 100644
--- a/arch/arm/mach-pxa/mioa701.c
+++ b/arch/arm/mach-pxa/mioa701.c
@@ -750,7 +750,8 @@ static void __init mioa701_machine_init(void)
pxa_set_keypad_info(&mioa701_keypad_info);
pxa_set_udc_info(&mioa701_udc_info);
pxa_set_ac97_info(&mioa701_ac97_info);
- pm_power_off = mioa701_poweroff;
+ register_power_off_handler_simple(mioa701_poweroff,
+ POWEROFF_PRIORITY_FALLBACK);
platform_add_devices(devices, ARRAY_SIZE(devices));
gsm_init();
diff --git a/arch/arm/mach-pxa/poodle.c b/arch/arm/mach-pxa/poodle.c
index 1319916..867b255 100644
--- a/arch/arm/mach-pxa/poodle.c
+++ b/arch/arm/mach-pxa/poodle.c
@@ -432,7 +432,8 @@ static void __init poodle_init(void)
{
int ret = 0;
- pm_power_off = poodle_poweroff;
+ register_power_off_handler_simple(poodle_poweroff,
+ POWEROFF_PRIORITY_FALLBACK);
PCFR |= PCFR_OPDE;
diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c
index 840c3a4..269b74b 100644
--- a/arch/arm/mach-pxa/spitz.c
+++ b/arch/arm/mach-pxa/spitz.c
@@ -944,7 +944,8 @@ static void spitz_restart(enum reboot_mode mode, const char *cmd)
static void __init spitz_init(void)
{
init_gpio_reset(SPITZ_GPIO_ON_RESET, 1, 0);
- pm_power_off = spitz_poweroff;
+ register_power_off_handler_simple(spitz_poweroff,
+ POWEROFF_PRIORITY_FALLBACK);
PMCR = 0x00;
diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c
index c158a6e..8f7fd80 100644
--- a/arch/arm/mach-pxa/tosa.c
+++ b/arch/arm/mach-pxa/tosa.c
@@ -940,7 +940,8 @@ static void __init tosa_init(void)
init_gpio_reset(TOSA_GPIO_ON_RESET, 0, 0);
- pm_power_off = tosa_poweroff;
+ register_power_off_handler_simple(tosa_poweroff,
+ POWEROFF_PRIORITY_FALLBACK);
PCFR |= PCFR_OPDE;
diff --git a/arch/arm/mach-pxa/viper.c b/arch/arm/mach-pxa/viper.c
index de3b080..8f8427c 100644
--- a/arch/arm/mach-pxa/viper.c
+++ b/arch/arm/mach-pxa/viper.c
@@ -919,7 +919,8 @@ static void __init viper_init(void)
{
u8 version;
- pm_power_off = viper_power_off;
+ register_power_off_handler_simple(viper_power_off,
+ POWEROFF_PRIORITY_DEFAULT);
pxa2xx_mfp_config(ARRAY_AND_SIZE(viper_pin_config));
diff --git a/arch/arm/mach-pxa/z2.c b/arch/arm/mach-pxa/z2.c
index e1a121b..cefd1bf 100644
--- a/arch/arm/mach-pxa/z2.c
+++ b/arch/arm/mach-pxa/z2.c
@@ -693,8 +693,6 @@ static void z2_power_off(void)
pxa27x_set_pwrmode(PWRMODE_DEEPSLEEP);
pxa27x_cpu_pm_enter(PM_SUSPEND_MEM);
}
-#else
-#define z2_power_off NULL
#endif
/******************************************************************************
@@ -719,7 +717,10 @@ static void __init z2_init(void)
z2_keys_init();
z2_pmic_init();
- pm_power_off = z2_power_off;
+#ifdef CONFIG_PM
+ register_power_off_handler_simple(z2_power_off,
+ POWEROFF_PRIORITY_FALLBACK);
+#endif
}
MACHINE_START(ZIPIT2, "Zipit Z2")
diff --git a/arch/arm/mach-pxa/zeus.c b/arch/arm/mach-pxa/zeus.c
index 205f9bf..651d7b9 100644
--- a/arch/arm/mach-pxa/zeus.c
+++ b/arch/arm/mach-pxa/zeus.c
@@ -690,8 +690,6 @@ static void zeus_power_off(void)
local_irq_disable();
cpu_suspend(PWRMODE_DEEPSLEEP, pxa27x_finish_suspend);
}
-#else
-#define zeus_power_off NULL
#endif
#ifdef CONFIG_APM_EMULATION
@@ -847,7 +845,10 @@ static void __init zeus_init(void)
__raw_writel(msc0, MSC0);
__raw_writel(msc1, MSC1);
- pm_power_off = zeus_power_off;
+#ifdef CONFIG_PM
+ register_power_off_handler_simple(zeus_power_off,
+ POWEROFF_PRIORITY_FALLBACK);
+#endif
zeus_setup_apm();
pxa2xx_mfp_config(ARRAY_AND_SIZE(zeus_pin_config));
diff --git a/arch/arm/mach-s3c24xx/mach-gta02.c b/arch/arm/mach-s3c24xx/mach-gta02.c
index 6d1e0b9..d3659ee 100644
--- a/arch/arm/mach-s3c24xx/mach-gta02.c
+++ b/arch/arm/mach-s3c24xx/mach-gta02.c
@@ -579,7 +579,8 @@ static void __init gta02_machine_init(void)
i2c_register_board_info(0, gta02_i2c_devs, ARRAY_SIZE(gta02_i2c_devs));
platform_add_devices(gta02_devices, ARRAY_SIZE(gta02_devices));
- pm_power_off = gta02_poweroff;
+ register_power_off_handler_simple(gta02_poweroff,
+ POWEROFF_PRIORITY_DEFAULT);
regulator_has_full_constraints();
}
diff --git a/arch/arm/mach-s3c24xx/mach-jive.c b/arch/arm/mach-s3c24xx/mach-jive.c
index 7d99fe8..1890fc2 100644
--- a/arch/arm/mach-s3c24xx/mach-jive.c
+++ b/arch/arm/mach-s3c24xx/mach-jive.c
@@ -657,7 +657,8 @@ static void __init jive_machine_init(void)
s3c_i2c0_set_platdata(&jive_i2c_cfg);
i2c_register_board_info(0, jive_i2c_devs, ARRAY_SIZE(jive_i2c_devs));
- pm_power_off = jive_power_off;
+ register_power_off_handler_simple(jive_power_off,
+ POWEROFF_PRIORITY_DEFAULT);
platform_add_devices(jive_devices, ARRAY_SIZE(jive_devices));
}
diff --git a/arch/arm/mach-s3c24xx/mach-vr1000.c b/arch/arm/mach-s3c24xx/mach-vr1000.c
index 89f32bd..8b19864 100644
--- a/arch/arm/mach-s3c24xx/mach-vr1000.c
+++ b/arch/arm/mach-s3c24xx/mach-vr1000.c
@@ -306,7 +306,8 @@ static void vr1000_power_off(void)
static void __init vr1000_map_io(void)
{
- pm_power_off = vr1000_power_off;
+ register_power_off_handler_simple(vr1000_power_off,
+ POWEROFF_PRIORITY_DEFAULT);
s3c24xx_init_io(vr1000_iodesc, ARRAY_SIZE(vr1000_iodesc));
s3c24xx_init_uarts(vr1000_uartcfgs, ARRAY_SIZE(vr1000_uartcfgs));
diff --git a/arch/arm/mach-s3c64xx/mach-smartq.c b/arch/arm/mach-s3c64xx/mach-smartq.c
index b3d1353..7e62e62 100644
--- a/arch/arm/mach-s3c64xx/mach-smartq.c
+++ b/arch/arm/mach-s3c64xx/mach-smartq.c
@@ -291,7 +291,8 @@ static int __init smartq_power_off_init(void)
/* leave power on */
gpio_direction_output(S3C64XX_GPK(15), 0);
- pm_power_off = smartq_power_off;
+ register_power_off_handler_simple(smartq_power_off,
+ POWEROFF_PRIORITY_DEFAULT);
return ret;
}
diff --git a/arch/arm/mach-sa1100/generic.c b/arch/arm/mach-sa1100/generic.c
index d4ea142..23a33d1 100644
--- a/arch/arm/mach-sa1100/generic.c
+++ b/arch/arm/mach-sa1100/generic.c
@@ -311,7 +311,8 @@ static struct platform_device *sa11x0_devices[] __initdata = {
static int __init sa1100_init(void)
{
- pm_power_off = sa1100_power_off;
+ register_power_off_handler_simple(sa1100_power_off,
+ POWEROFF_PRIORITY_FALLBACK);
return platform_add_devices(sa11x0_devices, ARRAY_SIZE(sa11x0_devices));
}
diff --git a/arch/arm/mach-sa1100/simpad.c b/arch/arm/mach-sa1100/simpad.c
index 41e476e..4db57cf 100644
--- a/arch/arm/mach-sa1100/simpad.c
+++ b/arch/arm/mach-sa1100/simpad.c
@@ -373,7 +373,8 @@ static int __init simpad_init(void)
if (ret)
printk(KERN_WARNING "simpad: Unable to register cs3 GPIO device");
- pm_power_off = simpad_power_off;
+ register_power_off_handler_simple(simpad_power_off,
+ POWEROFF_PRIORITY_FALLBACK);
sa11x0_ppc_configure_mcp();
sa11x0_register_mtd(&simpad_flash_data, simpad_flash_resources,
diff --git a/arch/arm/mach-u300/regulator.c b/arch/arm/mach-u300/regulator.c
index 0493a84..f8c0fe2 100644
--- a/arch/arm/mach-u300/regulator.c
+++ b/arch/arm/mach-u300/regulator.c
@@ -98,7 +98,8 @@ static int __init __u300_init_boardpower(struct platform_device *pdev)
U300_SYSCON_PMCR_DCON_ENABLE, 0);
/* Register globally exported PM poweroff hook */
- pm_power_off = u300_pm_poweroff;
+ register_power_off_handler_simple(u300_pm_poweroff,
+ POWEROFF_PRIORITY_DEFAULT);
return 0;
}
diff --git a/arch/arm/mach-vt8500/vt8500.c b/arch/arm/mach-vt8500/vt8500.c
index 3bc0dc9..f5b9936 100644
--- a/arch/arm/mach-vt8500/vt8500.c
+++ b/arch/arm/mach-vt8500/vt8500.c
@@ -155,7 +155,8 @@ static void __init vt8500_init(void)
pr_err("%s:ioremap(power_off) failed\n", __func__);
}
if (pmc_base)
- pm_power_off = &vt8500_power_off;
+ register_power_off_handler_simple(vt8500_power_off,
+ POWEROFF_PRIORITY_FALLBACK);
else
pr_err("%s: PMC Hibernation register could not be remapped, not enabling power off!\n", __func__);
diff --git a/arch/arm/xen/enlighten.c b/arch/arm/xen/enlighten.c
index 0e15f01..46bd95b 100644
--- a/arch/arm/xen/enlighten.c
+++ b/arch/arm/xen/enlighten.c
@@ -336,7 +336,8 @@ static int __init xen_pm_init(void)
if (!xen_domain())
return -ENODEV;
- pm_power_off = xen_power_off;
+ register_power_off_handler_simple(xen_power_off,
+ POWEROFF_PRIORITY_DEFAULT);
arm_pm_restart = xen_restart;
return 0;
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
