On Mon, Feb 23, 2009 at 08:55:33PM +0200, Felipe Balbi wrote:
> +#include "../../../arch/arm/mach-omap2/cm-regbits-34xx.h"
> +
> /* omap_start_ehc
> * - Start the TI USBHOST controller
> */
> @@ -274,32 +258,11 @@ static int omap_start_ehc(struct ehci_hcd_omap *omap, struct usb_hcd *hcd)
> PLL_MOD, OMAP3430ES2_CM_CLKEN2);
>
> while (!(cm_read_mod_reg(PLL_MOD, CM_IDLEST2) &
> - OMAP3430ES2_ST_PERIPH2_CLK_MASK)) {
> + OMAP3430ES2_ST_PERIPH2_CLK_MASK))
> dev_dbg(omap->dev, "idlest2 = 0x%x\n",
> cm_read_mod_reg(PLL_MOD, CM_IDLEST2));
> -
> - if (time_after(timeout, jiffies)) {
> - dev_dbg(omap->dev, "operation timed out\n");
> - ret = -EINVAL;
> - goto err_idlest2;
> - }
> - }
> /* End DPLL5 programming */
Hi Paul, could you look at how could we move dpll5 programming to clk
fw? This driver shouldn't have such code. Also, I guess this programming
is not right since I hear this driver doesn't enumerate anything.
--
balbi
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
