[RFC PATCH 2/4] [media] ti-vpe: Use line average de-interlacing for first 2 frames

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Archit Taneja <archit@xxxxxx>

For n input fields, the VPE de-interlacer creates n - 2 progressive frames.

To support this, we use line average mode of de-interlacer for the first 2
input fields to generate 2 progressive frames. We then revert back to the
preferred EDI method, and create n - 2 frames, creating a sum of n frames.

Signed-off-by: Archit Taneja <archit@xxxxxx>
Signed-off-by: Nikhil Devshatwar <nikhil.nd@xxxxxx>
---
 drivers/media/platform/ti-vpe/vpe.c |   29 +++++++++++++++++++++++++++++
 1 file changed, 29 insertions(+)

diff --git a/drivers/media/platform/ti-vpe/vpe.c b/drivers/media/platform/ti-vpe/vpe.c
index 4c3ef48..a11044f 100644
--- a/drivers/media/platform/ti-vpe/vpe.c
+++ b/drivers/media/platform/ti-vpe/vpe.c
@@ -807,6 +807,23 @@ static void set_dei_shadow_registers(struct vpe_ctx *ctx)
 	ctx->load_mmrs = true;
 }
 
+static void config_edi_input_mode(struct vpe_ctx *ctx, int mode)
+{
+	struct vpe_mmr_adb *mmr_adb = ctx->mmr_adb.addr;
+	u32 *edi_config_reg = &mmr_adb->dei_regs[3];
+
+	if (mode & 0x2)
+		write_field(edi_config_reg, 1, 1, 2);	/* EDI_ENABLE_3D */
+
+	if (mode & 0x3)
+		write_field(edi_config_reg, 1, 1, 3);	/* EDI_CHROMA_3D  */
+
+	write_field(edi_config_reg, mode, VPE_EDI_INP_MODE_MASK,
+		VPE_EDI_INP_MODE_SHIFT);
+
+	ctx->load_mmrs = true;
+}
+
 /*
  * Set the shadow registers whose values are modified when either the
  * source or destination format is changed.
@@ -1119,6 +1136,15 @@ static void device_run(void *priv)
 	ctx->dst_vb = v4l2_m2m_dst_buf_remove(ctx->m2m_ctx);
 	WARN_ON(ctx->dst_vb == NULL);
 
+	if (ctx->deinterlacing) {
+		/*
+		 * we have output the first 2 frames through line average, we
+		 * now switch to EDI de-interlacer
+		 */
+		if (ctx->sequence == 2)
+			config_edi_input_mode(ctx, 0x3); /* EDI (Y + UV) */
+	}
+
 	/* config descriptors */
 	if (ctx->dev->loaded_mmrs != ctx->mmr_adb.dma_addr || ctx->load_mmrs) {
 		vpdma_map_desc_buf(ctx->dev->vpdma, &ctx->mmr_adb);
@@ -1780,6 +1806,9 @@ static int vpe_streamon(struct file *file, void *priv, enum v4l2_buf_type type)
 {
 	struct vpe_ctx *ctx = file2ctx(file);
 
+	if (ctx->deinterlacing)
+		config_edi_input_mode(ctx, 0x0);
+
 	return v4l2_m2m_streamon(file, ctx->m2m_ctx, type);
 }
 
-- 
1.7.9.5

--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux Arm (vger)]     [ARM Kernel]     [ARM MSM]     [Linux Tegra]     [Linux WPAN Networking]     [Linux Wireless Networking]     [Maemo Users]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Trails]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux