This series fixes a few issues with the omap rtc-driver, cleans up a bit and finally adds support for the PMIC control feature found in some revisions of this RTC IP block. Ultimately, this allows for powering off the Beaglebone and waking it up again on RTC alarms. I noticed yesterday that Lokesh Vutla recently posted some patches to add regulator support to this driver. [1] While that series has some issues that needs to be addressed, I still think it could be a good idea to rebase my pmic_power_en patch on top of it as it adds some long overdue device abstraction. That would be needed anyway in order to support the new power-off infrastructure that's in the pipe in a clean way. [2] So my suggestion is to merge the first seven patches, rebase Lokesh series on top of that, and then I rebase my final five patches on top of that in turn. Hopefully, the new power-off handler call chain will have stabilised by then. Johan [1] http://www.spinics.net/lists/devicetree/msg50869.html [2] https://lkml.org/lkml/2014/10/7/30 Johan Hovold (12): rtc: omap: fix clock-source configuration rtc: omap: fix missing wakealarm attribute rtc: omap: fix class-device registration rtc: omap: remove unused register-base define rtc: omap: remove redundant debug message rtc: omap: use dev_info and dev_dbg rtc: omap: silence bogus power-up reset message at probe rtc: omap: restore irq state after reading TC registers rtc: omap: add support for pmic_power_en rtc: omap: enable wake-up from power off ARM: dts: am33xx: update rtc node compatible property ARM: dts: am335x-bone-common: enable power off and rtc wake up Documentation/devicetree/bindings/rtc/rtc-omap.txt | 9 +- arch/arm/boot/dts/am335x-bone-common.dtsi | 4 + arch/arm/boot/dts/am33xx.dtsi | 2 +- drivers/rtc/rtc-omap.c | 202 ++++++++++++++++----- 4 files changed, 173 insertions(+), 44 deletions(-) -- 2.0.4 -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html