* Frans Klaver | 2014-09-29 11:38:23 [+0200]: >threshold fixed >> + /* >> + * It claims to be 16C750 compatible however it is a little different. >> + * It has EFR and has no FCR7_64byte bit. The AFE (which it claims to >> + * have) is enabled via EFR instead of MCR. The type is set here 8250 >> + * just to get things going. UNKNOWN does not work for a few reasons and >> + * we don't need our own type since we don't use 8250's set_termios() >> + * and our "bugs" are handeld via the bug member. > >handled replaced that last line with or pm callback. since there no bugs member anymore. > >> + */ >> + up.port.type = PORT_8250; >> + up.port.iotype = UPIO_MEM; >> + up.port.flags = UPF_FIXED_PORT | UPF_FIXED_TYPE | UPF_SOFT_FLOW | >> + UPF_HARD_FLOW; >> + up.port.private_data = priv; >> + >> + up.port.regshift = 2; >> + up.port.fifosize = 64; >> + up.tx_loadsz = 64; >> + up.capabilities = UART_CAP_FIFO | UART_CAP_EFR | UART_CAP_SLEEP; >> +#ifdef CONFIG_PM_RUNTIME >> + /* >> + * PM_RUNTIME is mostly transparent. However to do it right we need to a > >need to _do_ a ...? I think dropping that 'to' should fix it. >> + * TX empty interrupt before we can put the device to auto idle. So if >> + * PM_RUNTIME is not enabled we don't add that flag and can spare that >> + * one extra interrupt in the TX path. >> + */ > ><snip> > >> +config SERIAL_8250_OMAP >> + tristate "Support for OMAP internal UART (8250 based driver)" >> + depends on SERIAL_8250 && ARCH_OMAP2PLUS >> + help >> + If you have a machine based on an Texas Instruments OMAP CPU you >> + can enable its onboard serial ports by enabling this option. >> + >> + This driver is in early stage and uses ttyS instead of ttyO. >> + > >I just wondered if this driver should be marked experimental? What did you have in mind? CONFIG_EXPERIMENTAL is gone. After all that debuging that I had in the meantime I was thinking about dropping that "early stage". >Thanks, >Frans Sebastian -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html