Re: [PATCH v11 5/9] arm: omap1: Migrate debug_ll macros to use 8250.S

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



* Daniel Thompson <daniel.thompson@xxxxxxxxxx> [140916 16:58]:
> The omap1's debug-macro.S is similar to the generic 8250 code. Compared to
> the 8520 code the omap1 macro automatically determines what UART to use
> based on breadcrumbs left by the bootloader and automatically copes with
> the eccentric register layout on OMAP7XX.
> 
> This patch drops both these features and relies instead on the generic
> 8250 macros:
> 
> 1. Dropping support for the bootloader breadcrumbs is identical to the
>    way the migration was handled for OMAP2 (see 808b7e07464d...).
> 
> 2. Support for OMAP7XX still exists but it must be configured by hand
>    (DEBUG_OMAP7XXUART1/2/3) rather than handled at runtime.

I assume you'll be queueing this along with other Kconfig.debug
changes, so:

Acked-by: Tony Lindgren <tony@xxxxxxxxxxx>
 
> Signed-off-by: Daniel Thompson <daniel.thompson@xxxxxxxxxx>
> Cc: Russell King <linux@xxxxxxxxxxxxxxxx>
> Cc: linux-arm-kernel@xxxxxxxxxxxxxxxxxxx
> Cc: Tony Lindgren <tony@xxxxxxxxxxx>
> Cc: Arnd Bergmann <arnd.bergmann@xxxxxxxxxx>
> Cc: linux-omap@xxxxxxxxxxxxxxx
> Tested-by: Aaro Koskinen <aaro.koskinen@xxxxxx>
> ---
>  arch/arm/Kconfig.debug                         |  57 +++++++++++++-
>  arch/arm/mach-omap1/include/mach/debug-macro.S | 101 -------------------------
>  2 files changed, 56 insertions(+), 102 deletions(-)
>  delete mode 100644 arch/arm/mach-omap1/include/mach/debug-macro.S
> 
> diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
> index 97c3058..6540036 100644
> --- a/arch/arm/Kconfig.debug
> +++ b/arch/arm/Kconfig.debug
> @@ -471,6 +471,30 @@ choice
>  		  Say Y here if you want kernel low-level debugging support
>  		  on TI-NSPIRE CX models.
>  
> +	config DEBUG_OMAP1UART1
> +		bool "Kernel low-level debugging via OMAP1 UART1"
> +		depends on ARCH_OMAP1
> +		select DEBUG_UART_8250
> +		help
> +		  Say Y here if you want kernel low-level debugging support
> +		  on OMAP1 based platforms (except OMAP730) on the UART1.
> +
> +	config DEBUG_OMAP1UART2
> +		bool "Kernel low-level debugging via OMAP1 UART2"
> +		depends on ARCH_OMAP1
> +		select DEBUG_UART_8250
> +		help
> +		  Say Y here if you want kernel low-level debugging support
> +		  on OMAP1 based platforms (except OMAP730) on the UART2.
> +
> +	config DEBUG_OMAP1UART3
> +		bool "Kernel low-level debugging via OMAP1 UART3"
> +		depends on ARCH_OMAP1
> +		select DEBUG_UART_8250
> +		help
> +		  Say Y here if you want kernel low-level debugging support
> +		  on OMAP1 based platforms (except OMAP730) on the UART3.
> +
>  	config DEBUG_OMAP2UART1
>  		bool "OMAP2/3/4 UART1 (omap2/3 sdp boards and some omap3 boards)"
>  		depends on ARCH_OMAP2PLUS
> @@ -513,6 +537,30 @@ choice
>  		depends on ARCH_OMAP2PLUS
>  		select DEBUG_OMAP2PLUS_UART
>  
> +	config DEBUG_OMAP7XXUART1
> +		bool "Kernel low-level debugging via OMAP730 UART1"
> +		depends on ARCH_OMAP730
> +		select DEBUG_UART_8250
> +		help
> +		  Say Y here if you want kernel low-level debugging support
> +		  on OMAP730 based platforms on the UART1.
> +
> +	config DEBUG_OMAP7XXUART2
> +		bool "Kernel low-level debugging via OMAP730 UART2"
> +		depends on ARCH_OMAP730
> +		select DEBUG_UART_8250
> +		help
> +		  Say Y here if you want kernel low-level debugging support
> +		  on OMAP730 based platforms on the UART2.
> +
> +	config DEBUG_OMAP7XXUART3
> +		bool "Kernel low-level debugging via OMAP730 UART3"
> +		depends on ARCH_OMAP730
> +		select DEBUG_UART_8250
> +		help
> +		  Say Y here if you want kernel low-level debugging support
> +		  on OMAP730 based platforms on the UART3.
> +
>  	config DEBUG_TI81XXUART1
>  		bool "Kernel low-level debugging messages via TI81XX UART1 (ti8148evm)"
>  		depends on ARCH_OMAP2PLUS
> @@ -1120,6 +1168,9 @@ config DEBUG_UART_PHYS
>  	default 0xff690000 if DEBUG_RK32_UART2
>  	default 0xffc02000 if DEBUG_SOCFPGA_UART
>  	default 0xffd82340 if ARCH_IOP13XX
> +	default 0xfffb0000 if DEBUG_OMAP1UART1 || DEBUG_OMAP7XXUART1
> +	default 0xfffb0800 if DEBUG_OMAP1UART2 || DEBUG_OMAP7XXUART2
> +	default 0xfffb9800 if DEBUG_OMAP1UART3 || DEBUG_OMAP7XXUART3
>  	default 0xfff36000 if DEBUG_HIGHBANK_UART
>  	default 0xfffff700 if ARCH_IOP33X
>  	depends on DEBUG_LL_UART_8250 || DEBUG_LL_UART_PL01X || \
> @@ -1188,6 +1239,9 @@ config DEBUG_UART_VIRT
>  	default 0xfef00000 if ARCH_IXP4XX && !CPU_BIG_ENDIAN
>  	default 0xfef00003 if ARCH_IXP4XX && CPU_BIG_ENDIAN
>  	default 0xfef36000 if DEBUG_HIGHBANK_UART
> +	default 0xfefb0000 if DEBUG_OMAP1UART1 || DEBUG_OMAP7XXUART1
> +	default 0xfefb0800 if DEBUG_OMAP1UART2 || DEBUG_OMAP7XXUART2
> +	default 0xfefb9800 if DEBUG_OMAP1UART3 || DEBUG_OMAP7XXUART3
>  	default 0xfefff700 if ARCH_IOP33X
>  	default 0xff003000 if DEBUG_U300_UART
>  	default DEBUG_UART_PHYS if !MMU
> @@ -1198,7 +1252,8 @@ config DEBUG_UART_VIRT
>  config DEBUG_UART_8250_SHIFT
>  	int "Register offset shift for the 8250 debug UART"
>  	depends on DEBUG_LL_UART_8250 || DEBUG_UART_8250
> -	default 0 if FOOTBRIDGE || ARCH_IOP32X
> +	default 0 if FOOTBRIDGE || ARCH_IOP32X || \
> +		DEBUG_OMAP7XXUART1 || DEBUG_OMAP7XXUART2 || DEBUG_OMAP7XXUART3
>  	default 2
>  
>  config DEBUG_UART_8250_WORD
> diff --git a/arch/arm/mach-omap1/include/mach/debug-macro.S b/arch/arm/mach-omap1/include/mach/debug-macro.S
> deleted file mode 100644
> index 5c1a26c..0000000
> --- a/arch/arm/mach-omap1/include/mach/debug-macro.S
> +++ /dev/null
> @@ -1,101 +0,0 @@
> -/* arch/arm/mach-omap1/include/mach/debug-macro.S
> - *
> - * Debugging macro include header
> - *
> - *  Copyright (C) 1994-1999 Russell King
> - *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
> - *
> - * This program is free software; you can redistribute it and/or modify
> - * it under the terms of the GNU General Public License version 2 as
> - * published by the Free Software Foundation.
> - *
> -*/
> -
> -#include <linux/serial_reg.h>
> -
> -#include "serial.h"
> -
> -		.pushsection .data
> -omap_uart_phys:	.word	0x0
> -omap_uart_virt:	.word	0x0
> -		.popsection
> -
> -		/*
> -		 * Note that this code won't work if the bootloader passes
> -		 * a wrong machine ID number in r1. To debug, just hardcode
> -		 * the desired UART phys and virt addresses temporarily into
> -		 * the omap_uart_phys and omap_uart_virt above.
> -		 */
> -		.macro	addruart, rp, rv, tmp
> -
> -		/* Use omap_uart_phys/virt if already configured */
> -9:		adr	\rp, 99f		@ get effective addr of 99f
> -		ldr	\rv, [\rp]		@ get absolute addr of 99f
> -		sub	\rv, \rv, \rp		@ offset between the two
> -		ldr	\rp, [\rp, #4]		@ abs addr of omap_uart_phys
> -		sub	\tmp, \rp, \rv		@ make it effective
> -		ldr	\rp, [\tmp, #0]		@ omap_uart_phys
> -		ldr	\rv, [\tmp, #4]		@ omap_uart_virt
> -		cmp	\rp, #0			@ is port configured?
> -		cmpne	\rv, #0
> -		bne	100f			@ already configured
> -
> -		/* Check the debug UART configuration set in uncompress.h */
> -		and	\rp, pc, #0xff000000
> -		ldr	\rv, =OMAP_UART_INFO_OFS
> -		ldr	\rp, [\rp, \rv]
> -
> -		/* Select the UART to use based on the UART1 scratchpad value */
> -10:		cmp	\rp, #0			@ no port configured?
> -		beq	11f			@ if none, try to use UART1
> -		cmp	\rp, #OMAP1UART1
> -		beq	11f			@ configure OMAP1UART1
> -		cmp	\rp, #OMAP1UART2
> -		beq	12f			@ configure OMAP1UART2
> -		cmp	\rp, #OMAP1UART3
> -		beq	13f			@ configure OMAP2UART3
> -
> -		/* Configure the UART offset from the phys/virt base */
> -11:		mov	\rp, #0x00fb0000	@ OMAP1UART1
> -		b	98f
> -12:		mov	\rp, #0x00fb0000	@ OMAP1UART1
> -		orr	\rp, \rp, #0x00000800	@ OMAP1UART2
> -		b	98f
> -13:		mov	\rp, #0x00fb0000	@ OMAP1UART1
> -		orr	\rp, \rp, #0x00000800	@ OMAP1UART2
> -		orr	\rp, \rp, #0x00009000	@ OMAP1UART3
> -
> -		/* Store both phys and virt address for the uart */
> -98:		add	\rp, \rp, #0xff000000	@ phys base
> -		str	\rp, [\tmp, #0]		@ omap_uart_phys
> -		sub	\rp, \rp, #0xff000000	@ phys base
> -		add	\rp, \rp, #0xfe000000	@ virt base
> -		str	\rp, [\tmp, #4]		@ omap_uart_virt
> -		b	9b
> -
> -		.align
> -99:		.word	.
> -		.word	omap_uart_phys
> -		.ltorg
> -
> -100:
> -		.endm
> -
> -		.macro	senduart,rd,rx
> -		strb	\rd, [\rx]
> -		.endm
> -
> -		.macro	busyuart,rd,rx
> -1001:		ldrb	\rd, [\rx, #(UART_LSR << OMAP_PORT_SHIFT)]
> -		and	\rd, \rd, #(UART_LSR_TEMT | UART_LSR_THRE)
> -		teq	\rd, #(UART_LSR_TEMT | UART_LSR_THRE)
> -		beq	1002f
> -		ldrb	\rd, [\rx, #(UART_LSR << OMAP7XX_PORT_SHIFT)]
> -		and	\rd, \rd, #(UART_LSR_TEMT | UART_LSR_THRE)
> -		teq	\rd, #(UART_LSR_TEMT | UART_LSR_THRE)
> -		bne	1001b
> -1002:
> -		.endm
> -
> -		.macro	waituart,rd,rx
> -		.endm
> -- 
> 1.9.3
> 
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux Arm (vger)]     [ARM Kernel]     [ARM MSM]     [Linux Tegra]     [Linux WPAN Networking]     [Linux Wireless Networking]     [Maemo Users]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Trails]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux