The omap uart provides support for HW assisted flow control. What is missing is the support to throttle / unthrottle callbacks which are used by the omap-serial driver at the moment. This patch adds the callbacks. It should be safe to add them since they are only invovked from the serial_core (uart_throttle()) if the feature flags are set. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx> --- drivers/tty/serial/8250/8250_core.c | 14 ++++++++++++++ include/linux/serial_core.h | 2 ++ 2 files changed, 16 insertions(+) diff --git a/drivers/tty/serial/8250/8250_core.c b/drivers/tty/serial/8250/8250_core.c index bd0e1897..714f954 100644 --- a/drivers/tty/serial/8250/8250_core.c +++ b/drivers/tty/serial/8250/8250_core.c @@ -1320,6 +1320,16 @@ static void serial8250_start_tx(struct uart_port *port) } } +static void serial8250_throttle(struct uart_port *port) +{ + port->throttle(port); +} + +static void serial8250_unthrottle(struct uart_port *port) +{ + port->unthrottle(port); +} + static void serial8250_stop_rx(struct uart_port *port) { struct uart_8250_port *up = @@ -2752,6 +2762,8 @@ static struct uart_ops serial8250_pops = { .get_mctrl = serial8250_get_mctrl, .stop_tx = serial8250_stop_tx, .start_tx = serial8250_start_tx, + .throttle = serial8250_throttle, + .unthrottle = serial8250_unthrottle, .stop_rx = serial8250_stop_rx, .enable_ms = serial8250_enable_ms, .break_ctl = serial8250_break_ctl, @@ -3300,6 +3312,8 @@ int serial8250_register_8250_port(struct uart_8250_port *up) uart->port.fifosize = up->port.fifosize; uart->tx_loadsz = up->tx_loadsz; uart->capabilities = up->capabilities; + uart->port.throttle = up->port.throttle; + uart->port.unthrottle = up->port.unthrottle; /* Take tx_loadsz from fifosize if it wasn't set separately */ if (uart->port.fifosize && !uart->tx_loadsz) diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h index 6f20ff0..c380af2 100644 --- a/include/linux/serial_core.h +++ b/include/linux/serial_core.h @@ -124,6 +124,8 @@ struct uart_port { struct ktermios *old); int (*startup)(struct uart_port *port); void (*shutdown)(struct uart_port *port); + void (*throttle)(struct uart_port *port); + void (*unthrottle)(struct uart_port *port); int (*handle_irq)(struct uart_port *); void (*pm)(struct uart_port *, unsigned int state, unsigned int old); -- 2.0.1 -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html