* Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx> [140716 05:14]: > On 07/11/2014 08:41 AM, Tony Lindgren wrote: > > > > If the RX pin does not wake it up, you need to configure the > > pinctrl-single entry for it, and configure that pin as a wake-up > > interrupt. See the interrupts-extended entry in omap3-beagle-xm.dts. > > This does not help. Checking the manual, there is not something like > PIN_OFF_WAKEUPENABLE for am33xx. There is just INPUT/OUTPUT, pull > up/down + enabled/disabled and the mux_mode. For the interrupt, the HW > referenced as omap3_pmx_core touches some bits in the pinmux register > which do not exists on am33xx. Right, on am33xx there's no IO chain wake-up path. AFAIK the only way to provide wake events on am33xx would be to mux the RX pin temporarily to a GPIO input. And sounds like that may work only if the GPIO is in the first GPIO bank that's always on. I don't know if the other GPIO banks on am33xx can provide wake up events. > So I have nothing on HW around that could test wakeup scenario. Bummer :( I'll give it a try again for the next revision. Regards, Tony -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
