* Santosh Shilimkar <santosh.shilimkar@xxxxxx> [140714 07:33]: > On Monday 14 July 2014 09:13 AM, Sekhar Nori wrote: > > On OMAP SOCs using PL310 controllers, power_ctrl register is not > > accessible from non-secure software even on PL310 versions which > > support it. The secure code takes care of setting it up correctly > > and power transitions are proven on these devices. > > > > For example, AM437x has L2C-310 version r3p3 and ROM code on that > > device does not support writing to L2C-310 power control register. > > The L2C driver, however, tries writing to this register for all > > revisions >= r3p0. > > > > This leads to a warning dump on boot which leads most users to believe > > that L2 cache is non-functional. > > > > Since the problem is understood, and cannot be addressed through > > software, replace the warning with a pr_info() while maintaining the > > WARN_ON() for other truly unexpected scenarios. > > > > Reported-by: Nishanth Menon <nm@xxxxxx> > > Tested-by: Felipe Balbi <balbi@xxxxxx> > > Signed-off-by: Sekhar Nori <nsekhar@xxxxxx> > > --- > > Only description updated since v1 > > > Thanks for update. > Acked-by: Santosh Shilimkar <santosh.shilimkar@xxxxxx> > Thanks applying into omap-for-v3.16/fixes. Tony -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
