[PATCH v4 05/11] Documentation: dt: add ti,am3353_wkup_m3 bindings

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Add the device tree bindings document for am3353 wkup_m3.

Signed-off-by: Dave Gerlach <d-gerlach@xxxxxx>
CC: Ohad Ben-Cohen <ohad@xxxxxxxxxx>
CC: Benoit Cousson <bcousson@xxxxxxxxxxxx>
---
 .../bindings/remoteproc/wkup_m3_rproc.txt          | 46 ++++++++++++++++++++++
 1 file changed, 46 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/remoteproc/wkup_m3_rproc.txt

diff --git a/Documentation/devicetree/bindings/remoteproc/wkup_m3_rproc.txt b/Documentation/devicetree/bindings/remoteproc/wkup_m3_rproc.txt
new file mode 100644
index 0000000..e9dd909
--- /dev/null
+++ b/Documentation/devicetree/bindings/remoteproc/wkup_m3_rproc.txt
@@ -0,0 +1,46 @@
+Wakeup M3 Remote Proc Driver
+=====================
+
+TI AMx3 Family devices use a Cortex M3 co-processor to help with various
+low power tasks that cannot be controlled from the MPU. The CM3 requires
+a firmware binary to accomplish this and communicates with the MPU through
+IPC registers present in the SoCs control module. The wkup_m3 remoteproc
+driver handles the loading of the firmware and exposes an API to
+communicate with the wkup_m3 through the use of the IPC registers and a
+mailbox.
+
+Wkup M3 Device Node:
+====================
+A wkup_m3 device node is used to represent a wakeup M3 IP instance within
+a SoC. The sub-mailboxes are represented as child node of this parent node.
+
+Required properties:
+--------------------
+- compatible:		Should be "ti,am3353-wkup-m3" for AM33xx SoCs
+- reg:			Contains the wkup_m3 register address ranges for
+			umem, dmem, and ipc-regs.
+- reg-names:		Names for reg addresses given above
+- interrupts:		Contains the interrupt information for the wkup_m3
+			interrupt that signals the MPU.
+- ti,hwmods:		Name of the hwmod associated with the mailbox
+- ti,no-reset-on-init:	Reset is handled after fw has been loaded, not at
+			init of hwmod.
+- mbox-names:		Name of the mbox channel for the IPC framework
+- mbox:			Phandle used by IPC framework to get correct mbox
+			channel for communication.
+
+Example:
+--------
+/* AM33xx */
+wkup_m3: wkup_m3@44d00000 {
+	compatible = "ti,am3353-wkup-m3";
+	reg = <0x44d00000 0x4000
+	       0x44d80000 0x2000
+	       0x44e11324 0x0024>;
+	reg-names = "m3_umem", "m3_dmem", "ipc_regs";
+	interrupts = <78>;
+	ti,hwmods = "wkup_m3";
+	ti,no-reset-on-init;
+	mbox-names = "wkup_m3";
+	mbox = <&mailbox &mbox_wkupm3>;
+};
-- 
1.9.0

--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux Arm (vger)]     [ARM Kernel]     [ARM MSM]     [Linux Tegra]     [Linux WPAN Networking]     [Linux Wireless Networking]     [Maemo Users]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Trails]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux