Re: [PATCH 2/3] arm: dts: dra7: Enable CPSW and MDIO for dra7xx EVM

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wednesday 09 July 2014 12:10 AM, Sebastian Andrzej Siewior wrote:
> From: Mugunthan V N <mugunthanvnm@xxxxxx>
>
> Adding CPSW phy-id, CPSW and MDIO pinmux configuration for active
> and sleep states and enable them in board evm dts file.
>
> Signed-off-by: Mugunthan V N <mugunthanvnm@xxxxxx>
> [Resolved merge conflict and rebased on 3.8 kernel.
> Update the pinmux configuration for CPSW and MDIO by removing the
> macro definitons to match the 3.8 implementation.]
> Signed-off-by: Praveen Rao <prao@xxxxxx>
> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
> ---
>  arch/arm/boot/dts/dra7-evm.dts | 61 ++++++++++++++++++++++++++++++++++++++++++
>  arch/arm/boot/dts/dra7.dtsi    | 48 +++++++++++++++++++++++++++++++++
>  2 files changed, 109 insertions(+)
>
> diff --git a/arch/arm/boot/dts/dra7-evm.dts b/arch/arm/boot/dts/dra7-evm.dts
> index 4adc280..956a7bd 100644
> --- a/arch/arm/boot/dts/dra7-evm.dts
> +++ b/arch/arm/boot/dts/dra7-evm.dts
> @@ -94,6 +94,46 @@
>  		>;
>  	};
>  
> +	cpsw_default_pins: pinmux_cpsw_default_pins {
> +		pinctrl-single,pins = <
> +			/* Slave 1 */
> +			0x250	0x0 /* rgmii1_tclk PIN_OUTPUT | MUX_MODE0 */
> +			0x254	0x0 /* rgmii1_tctl PIN_OUTPUT | MUX_MODE0 */
> +			0x258	0x0 /* rgmii1_td3 PIN_OUTPUT | MUX_MODE0 */
> +			0x25c	0x0 /* rgmii1_td2 PIN_OUTPUT | MUX_MODE0 */
> +			0x260	0x0 /* rgmii1_td1 PIN_OUTPUT | MUX_MODE0 */
> +			0x264	0x0 /* rgmii1_td0 PIN_OUTPUT | MUX_MODE0 */
> +			0x268	0x00040000 /* rgmii1_rclk PIN_INPUT | MUX_MODE0 */
> +			0x26c	0x00040000 /* rgmii1_rctl PIN_INPUT | MUX_MODE0 */
> +			0x270	0x00040000 /* rgmii1_rd3 PIN_INPUT | MUX_MODE0 */
> +			0x274	0x00040000 /* rgmii1_rd2 PIN_INPUT | MUX_MODE0 */
> +			0x278	0x00040000 /* rgmii1_rd1 PIN_INPUT | MUX_MODE0 */
> +			0x27c	0x00040000 /* rgmii1_rd0 PIN_INPUT | MUX_MODE0 */
> +
> +			/* Slave 2 */
> +			0x198	0x4 /* rgmii2_tclk PIN_OUTPUT | MUX_MODE4 */
> +			0x19c	0x4 /* rgmii2_tctl PIN_OUTPUT | MUX_MODE4 */
> +			0x1a0	0x4 /* rgmii2_td3 PIN_OUTPUT | MUX_MODE4 */
> +			0x1a4	0x4 /* rgmii2_td2 PIN_OUTPUT | MUX_MODE4 */
> +			0x1a8	0x4 /* rgmii2_td1 PIN_OUTPUT | MUX_MODE4 */
> +			0x1ac	0x4 /* rgmii2_td0 PIN_OUTPUT | MUX_MODE4 */
> +			0x1b0	0x00040004 /* rgmii2_rclk PIN_INPUT | MUX_MODE4 */
> +			0x1b4	0x00040004 /* rgmii2_rctl PIN_INPUT | MUX_MODE4 */
> +			0x1b8	0x00040004 /* rgmii2_rd3 PIN_INPUT | MUX_MODE4 */
> +			0x1bc	0x00040004 /* rgmii2_rd2 PIN_INPUT | MUX_MODE4 */
> +			0x1c0	0x00040004 /* rgmii2_rd1 PIN_INPUT | MUX_MODE4 */
> +			0x1c4	0x00040004 /* rgmii2_rd0 PIN_INPUT | MUX_MODE4 */
> +		>;
> +	};
> +
> +	davinci_mdio_default_pins: pinmux_davinci_mdio_default_pins {
> +		pinctrl-single,pins = <
> +			/* MDIO */
> +			0x23c	0x30000 /* mdio_data PIN_OUTPUT_PULLUP | MUX_MODE0 */
> +			0x240	0x70000 /* mdio_clk PIN_INPUT_PULLUP | MUX_MODE0 */
> +			>;
> +		};
> +
>  	qspi1_pins: pinmux_qspi1_pins {
>  		pinctrl-single,pins = <
>  			0x4c (PIN_INPUT | MUX_MODE1)  /* gpmc_a3.qspi1_cs2 */
> @@ -332,6 +372,27 @@
>  	cpu0-supply = <&smps123_reg>;
>  };
>  
> +&gmac {
> +	status="okay";
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&cpsw_default_pins>;
> +};
> +
> +&davinci_mdio {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&davinci_mdio_default_pins>;
> +};
> +
> +&cpsw_emac0 {
> +	phy_id = <&davinci_mdio>, <2>;
> +	phy-mode = "rgmii-txid";
> +};
> +
> +&cpsw_emac1 {
> +	phy_id = <&davinci_mdio>, <3>;
> +	phy-mode = "rgmii-txid";
> +};
> +
>  &qspi {
>  	status = "okay";
>  	pinctrl-names = "default";
> diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi
> index c29945e..daf7d36 100644
> --- a/arch/arm/boot/dts/dra7.dtsi
> +++ b/arch/arm/boot/dts/dra7.dtsi
> @@ -763,6 +763,54 @@
>  			status = "disabled";
>  		};
>  
> +		gmac: ethernet@48484000 {
> +			compatible = "ti,cpsw";
> +			ti,hwmods = "gmac";
> +			cpdma_channels = <8>;
> +			ale_entries = <1024>;
> +			bd_ram_size = <0x2000>;
> +			no_bd_ram = <0>;
> +			rx_descs = <64>;
> +			mac_control = <0x20>;
> +			slaves = <2>;
> +			active_slave = <0>;
> +			cpts_clock_mult = <0x80000000>;
> +			cpts_clock_shift = <29>;
> +			reg = <0x48484000 0x800
> +				0x48485200 0x100>;
> +			#address-cells = <1>;
> +			#size-cells = <1>;
> +			/*
> +			 * rx_thresh_pend
> +			 * rx_pend
> +			 * tx_pend
> +			 * misc_pend
> +			 */
> +			interrupts = <0 50 0x4>,
> +					<0 51 0x4>,
> +					<0 52 0x4>,
> +					<0 53 0x4>;

These interrupts are not correct, I have already posted and are waiting
for crossbar to be merged.
Hence NAK

Regards
Mugunthan V N

> +			ranges;
> +			status = "disabled";
> +
> +			davinci_mdio: mdio@48485000 {
> +				compatible = "ti,davinci_mdio";
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +				ti,hwmods = "davinci_mdio";
> +				bus_freq = <1000000>;
> +				reg = <0x48485000 0x100>;
> +			};
> +
> +			cpsw_emac0: slave@48484200 {
> +				mac-address = [ 00 00 00 00 00 00 ];
> +			};
> +
> +			cpsw_emac1: slave@48484300 {
> +				mac-address = [ 00 00 00 00 00 00 ];
> +			};
> +		};
> +
>  		qspi: qspi@4b300000 {
>  			compatible = "ti,dra7xxx-qspi";
>  			reg = <0x4b300000 0x100>;

--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux Arm (vger)]     [ARM Kernel]     [ARM MSM]     [Linux Tegra]     [Linux WPAN Networking]     [Linux Wireless Networking]     [Maemo Users]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Trails]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux