* Felipe Balbi <me@xxxxxxxxxxxxxxx> [090217 15:30]:
> On Wed, Feb 18, 2009 at 01:07:15AM +0200, Felipe Balbi wrote:
> > On Tue, Feb 17, 2009 at 10:38:19PM +0100, ext Otto Solares wrote:
> > > On Fri, Feb 13, 2009 at 02:43:46PM +0200, Felipe Balbi wrote:
> > > > Hi Dave, all
> > > >
> > > > could you look at the updated lp5521 patches ?
> > > >
> > > > Basically patches from 1 to 3 are the same.
> > > > Patch 4 has the fix you asked me to implement, getting
> > > > a label from pdata (then I also moved mode and the presence
> > > > of each individual led to pdata as well), patch 5 only moves
> > > > the file to drivers/leds and patch 6 is a new patch adding
> > > > pdata to board-n800.c
> > > >
> > > > After these, lp5521 should be ok for going upstream.
> > > >
> > > > Thanks for your time ;-)
> > >
> > > Hi Felipe,
> > >
> > > I don't see this patches on the l-o tree or am I missing something?
> >
> > once again the didn't get applied. lp5521 is already in LED tree and
> > we're gona have two forks of the same driver :-p
Just pushed your earlier series..
> > Maybe, Tony, you could apply the attached.
So I guess this is no longer needed. I'll reset drives/leds to
mainline at some point soonish.
> damn this new Nokia server is converting my tabs into spaces :-(
Also seems to encode them quoted-printable too :(
Regards,
Tony
> here's again:
>
> ==== cut here ====
> From 66bf0442f949f4da02d5b4cae584cc7148f7b63c Mon Sep 17 00:00:00 2001
> From: Felipe Balbi <me@xxxxxxxxxxxxxxx>
> Date: Wed, 18 Feb 2009 01:17:28 +0200
> Subject: [PATCH] i2c: chips: remove lp5521 driver
>
> It's now coming via LED tree so it should be
> safe to get rid of it here and wait till next
> mainline merge.
> Signed-off-by: Felipe Balbi <me@xxxxxxxxxxxxxxx>
> ---
> drivers/i2c/chips/Kconfig | 7 -
> drivers/i2c/chips/Makefile | 1 -
> drivers/i2c/chips/lp5521.c | 585 --------------------------------------------
> 3 files changed, 0 insertions(+), 593 deletions(-)
> delete mode 100644 drivers/i2c/chips/lp5521.c
>
> diff --git a/drivers/i2c/chips/Kconfig b/drivers/i2c/chips/Kconfig
> index bb95b3e..e4831e1 100644
> --- a/drivers/i2c/chips/Kconfig
> +++ b/drivers/i2c/chips/Kconfig
> @@ -141,13 +141,6 @@ config SENSORS_TSL2563
> This driver can also be built as a module. If so, the module
> will be called tsl2563.
>
> -config LP5521
> - tristate "LP5521 LED driver chip"
> - depends on I2C
> - help
> - If you say yes here you get support for the National Semiconductor
> - LP5521 LED driver.
> -
> config MENELAUS
> bool "TWL92330/Menelaus PM chip"
> depends on I2C=y && ARCH_OMAP24XX
> diff --git a/drivers/i2c/chips/Makefile b/drivers/i2c/chips/Makefile
> index 32a395f..1c94712 100644
> --- a/drivers/i2c/chips/Makefile
> +++ b/drivers/i2c/chips/Makefile
> @@ -21,7 +21,6 @@ obj-$(CONFIG_TWL4030_POWEROFF) += twl4030-poweroff.o
> obj-$(CONFIG_TWL4030_PWRBUTTON) += twl4030-pwrbutton.o
> obj-$(CONFIG_TWL4030_MADC) += twl4030-madc.o
> obj-$(CONFIG_RTC_X1205_I2C) += x1205.o
> -obj-$(CONFIG_LP5521) += lp5521.o
>
> ifeq ($(CONFIG_I2C_DEBUG_CHIP),y)
> EXTRA_CFLAGS += -DDEBUG
> diff --git a/drivers/i2c/chips/lp5521.c b/drivers/i2c/chips/lp5521.c
> deleted file mode 100644
> index c0862d9..0000000
> --- a/drivers/i2c/chips/lp5521.c
> +++ /dev/null
> @@ -1,585 +0,0 @@
> -/*
> - * drivers/i2c/chips/lp5521.c
> - *
> - * Copyright (C) 2007 Nokia Corporation
> - *
> - * Written by Mathias Nyman <mathias.nyman@xxxxxxxxx>
> - *
> - * This program is free software; you can redistribute it and/or modify
> - * it under the terms of the GNU General Public License as published by
> - * the Free Software Foundation; either version 2 of the License, or
> - * (at your option) any later version.
> - *
> - * This program is distributed in the hope that it will be useful,
> - * but WITHOUT ANY WARRANTY; without even the implied warranty of
> - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> - * GNU General Public License for more details.
> - *
> - * You should have received a copy of the GNU General Public License
> - * along with this program; if not, write to the Free Software
> - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
> - */
> -
> -#include <linux/module.h>
> -#include <linux/init.h>
> -#include <linux/i2c.h>
> -#include <linux/mutex.h>
> -#include <mach/gpio.h>
> -
> -#define LP5521_DRIVER_NAME "lp5521"
> -
> -#ifdef LED_CONNECTED_WRONG
> -#define LP5521_REG_R_PWM 0x04
> -#define LP5521_REG_B_PWM 0x02
> -#else
> -#define LP5521_REG_R_PWM 0x02
> -#define LP5521_REG_B_PWM 0x04
> -#endif
> -#define LP5521_REG_ENABLE 0x00
> -#define LP5521_REG_OP_MODE 0x01
> -#define LP5521_REG_G_PWM 0x03
> -#define LP5521_REG_R_CNTRL 0x05
> -#define LP5521_REG_G_CNTRL 0x06
> -#define LP5521_REG_B_CNTRL 0x07
> -#define LP5521_REG_MISC 0x08
> -#define LP5521_REG_R_CHANNEL_PC 0x09
> -#define LP5521_REG_G_CHANNEL_PC 0x0a
> -#define LP5521_REG_B_CHANNEL_PC 0x0b
> -#define LP5521_REG_STATUS 0x0c
> -#define LP5521_REG_RESET 0x0d
> -#define LP5521_REG_GPO 0x0e
> -#define LP5521_REG_R_PROG_MEM 0x10
> -#define LP5521_REG_G_PROG_MEM 0x30
> -#define LP5521_REG_B_PROG_MEM 0x50
> -
> -#define LP5521_MODE_LOAD "load"
> -#define LP5521_MODE_RUN "run"
> -#define LP5521_MODE_DIRECT_CONTROL "direct"
> -
> -#define LP5521_CURRENT_1m5 0x0f
> -#define LP5521_CURRENT_3m1 0x1f
> -#define LP5521_CURRENT_4m7 0x2f
> -#define LP5521_CURRENT_6m3 0x3f
> -#define LP5521_CURRENT_7m9 0x4f
> -#define LP5521_CURRENT_9m5 0x5f
> -#define LP5521_CURRENT_11m1 0x6f
> -#define LP5521_CURRENT_12m7 0x7f
> -#define LP5521_CURRENT_14m3 0x8f
> -#define LP5521_CURRENT_15m9 0x9f
> -#define LP5521_CURRENT_17m5 0xaf
> -#define LP5521_CURRENT_19m1 0xbf
> -#define LP5521_CURRENT_20m7 0xcf
> -#define LP5521_CURRENT_22m3 0xdf
> -#define LP5521_CURRENT_23m9 0xef
> -#define LP5521_CURRENT_25m5 0xff
> -
> -#define LP5521_PROGRAM_LENGTH 32 /* in bytes */
> -
> -struct lp5521_chip {
> - struct mutex lock;
> - struct i2c_client *client;
> - char *mode;
> - int red;
> - int green;
> - int blue;
> -};
> -
> -static int lp5521_set_mode(struct lp5521_chip *chip, char *mode);
> -
> -static int lp5521_write(struct i2c_client *client, u8 reg, u8 value)
> -{
> - return i2c_smbus_write_byte_data(client, reg, value);
> -}
> -
> -static int lp5521_read(struct i2c_client *client, u8 reg, u8 *buf)
> -{
> - s32 ret = i2c_smbus_read_byte_data(client, reg);
> -
> - if (ret < 0)
> - return -EIO;
> -
> - *buf = ret;
> - return 0;
> -}
> -
> -static int lp5521_configure(struct i2c_client *client)
> -{
> - int ret = 0;
> -
> - /* Enable chip and set light to logarithmic mode*/
> - ret |= lp5521_write(client, LP5521_REG_ENABLE, 0xc0);
> -
> - /* setting all color pwms to direct control mode */
> - ret |= lp5521_write(client, LP5521_REG_OP_MODE, 0x3f);
> -
> - /* setting current to 4.7 mA for all channels */
> - ret |= lp5521_write(client, LP5521_REG_R_CNTRL, LP5521_CURRENT_4m7);
> - ret |= lp5521_write(client, LP5521_REG_G_CNTRL, LP5521_CURRENT_4m7);
> - ret |= lp5521_write(client, LP5521_REG_B_CNTRL, LP5521_CURRENT_4m7);
> -
> - /* Enable auto-powersave, set charge pump to auto, red to battery */
> - ret |= lp5521_write(client, LP5521_REG_MISC, 0x3c);
> -
> - /* initialize all channels pwm to zero */
> - ret |= lp5521_write(client, LP5521_REG_R_PWM, 0);
> - ret |= lp5521_write(client, LP5521_REG_G_PWM, 0);
> - ret |= lp5521_write(client, LP5521_REG_B_PWM, 0);
> -
> - /* Not much can be done about errors at this point */
> - return ret;
> -}
> -
> -static int lp5521_load_program(struct lp5521_chip *chip, u8 *pattern)
> -{
> - struct i2c_client *client = chip->client;
> - int ret = 0;
> -
> - /* Enter load program mode for all led channels */
> - ret |= lp5521_write(client, LP5521_REG_OP_MODE, 0x15); /* 0001 0101 */
> - if (ret)
> - return ret;
> -
> - if (chip->red)
> - ret |= i2c_smbus_write_i2c_block_data(client,
> - LP5521_REG_R_PROG_MEM,
> - LP5521_PROGRAM_LENGTH,
> - pattern);
> - if (chip->green)
> - ret |= i2c_smbus_write_i2c_block_data(client,
> - LP5521_REG_G_PROG_MEM,
> - LP5521_PROGRAM_LENGTH,
> - pattern);
> - if (chip->blue)
> - ret |= i2c_smbus_write_i2c_block_data(client,
> - LP5521_REG_B_PROG_MEM,
> - LP5521_PROGRAM_LENGTH,
> - pattern);
> -
> - return ret;
> -}
> -
> -static int lp5521_run_program(struct lp5521_chip *chip)
> -{
> - struct i2c_client *client = chip->client;
> - int ret;
> - u8 mask = 0xc0;
> - u8 exec_state = 0;
> - u8 enable_reg;
> -
> - ret = lp5521_read(client, LP5521_REG_ENABLE, &enable_reg);
> - if (ret)
> - goto fail;
> -
> - enable_reg &= mask;
> -
> - /* set all active channels exec state to countinous run*/
> - exec_state |= (chip->red << 5);
> - exec_state |= (chip->green << 3);
> - exec_state |= (chip->blue << 1);
> -
> - enable_reg |= exec_state;
> -
> - ret |= lp5521_write(client, LP5521_REG_ENABLE, enable_reg);
> -
> - /* set op-mode to run for active channels, disabled for others */
> - ret |= lp5521_write(client, LP5521_REG_OP_MODE, exec_state);
> -
> -fail:
> - return ret;
> -}
> -
> -/*--------------------------------------------------------------*/
> -/* Sysfs interface */
> -/*--------------------------------------------------------------*/
> -
> -static ssize_t show_active_channels(struct device *dev,
> - struct device_attribute *attr,
> - char *buf)
> -{
> - struct lp5521_chip *chip = dev_get_drvdata(dev);
> - char channels[4];
> - int pos = 0;
> -
> -#ifdef LED_CONNECTED_WRONG
> - if (chip->blue)
> - pos += sprintf(channels + pos, "r");
> - if (chip->green)
> - pos += sprintf(channels + pos, "g");
> - if (chip->red)
> - pos += sprintf(channels + pos, "b");
> -
> -#else
> - if (chip->red)
> - pos += sprintf(channels + pos, "r");
> - if (chip->green)
> - pos += sprintf(channels + pos, "g");
> - if (chip->blue)
> - pos += sprintf(channels + pos, "b");
> -#endif
> -
> - channels[pos] = '\0';
> -
> - return sprintf(buf, "%s\n", channels);
> -}
> -
> -static ssize_t store_active_channels(struct device *dev,
> - struct device_attribute *attr,
> - const char *buf, size_t len)
> -{
> - struct lp5521_chip *chip = dev_get_drvdata(dev);
> -
> - chip->red = 0;
> - chip->green = 0;
> - chip->blue = 0;
> -
> -#ifdef LED_CONNECTED_WRONG
> - if (strchr(buf, 'r') != NULL)
> - chip->blue = 1;
> - if (strchr(buf, 'b') != NULL)
> - chip->red = 1;
> -#else
> - if (strchr(buf, 'r') != NULL)
> - chip->red = 1;
> - if (strchr(buf, 'b') != NULL)
> - chip->blue = 1;
> -#endif
> - if (strchr(buf, 'g') != NULL)
> - chip->green = 1;
> -
> - return len;
> -}
> -
> -static ssize_t show_color(struct device *dev,
> - struct device_attribute *attr,
> - char *buf)
> -{
> - struct i2c_client *client = to_i2c_client(dev);
> - int ret = 0;
> - u8 r, g, b;
> -
> - ret |= lp5521_read(client, LP5521_REG_R_PWM, &r);
> - ret |= lp5521_read(client, LP5521_REG_G_PWM, &g);
> - ret |= lp5521_read(client, LP5521_REG_B_PWM, &b);
> -
> - if (ret)
> - return ret;
> -
> - return sprintf(buf, "%.2x:%.2x:%.2x\n", r, g, b);
> -}
> -
> -static ssize_t store_color(struct device *dev,
> - struct device_attribute *attr,
> - const char *buf, size_t len)
> -{
> - struct i2c_client *client = to_i2c_client(dev);
> - struct lp5521_chip *chip = i2c_get_clientdata(client);
> - int ret;
> - unsigned r, g, b;
> -
> -
> - ret = sscanf(buf, "%2x:%2x:%2x", &r, &g, &b);
> - if (ret != 3)
> - return -EINVAL;
> -
> - mutex_lock(&chip->lock);
> -
> - ret = lp5521_write(client, LP5521_REG_R_PWM, (u8)r);
> - ret = lp5521_write(client, LP5521_REG_G_PWM, (u8)g);
> - ret = lp5521_write(client, LP5521_REG_B_PWM, (u8)b);
> -
> - mutex_unlock(&chip->lock);
> -
> - return len;
> -}
> -
> -static ssize_t store_load(struct device *dev,
> - struct device_attribute *attr,
> - const char *buf, size_t len)
> -{
> - struct lp5521_chip *chip = dev_get_drvdata(dev);
> - int ret, nrchars, offset = 0, i = 0;
> - char c[3];
> - unsigned cmd;
> - u8 pattern[LP5521_PROGRAM_LENGTH] = {0};
> -
> - while ((offset < len - 1) && (i < LP5521_PROGRAM_LENGTH)) {
> -
> - /* separate sscanfs because length is working only for %s */
> - ret = sscanf(buf + offset, "%2s%n ", c, &nrchars);
> - ret = sscanf(c, "%2x", &cmd);
> - if (ret != 1)
> - goto fail;
> - pattern[i] = (u8)cmd;
> -
> - offset += nrchars;
> - i++;
> - }
> -
> - /* pattern commands are always two bytes long */
> - if (i % 2)
> - goto fail;
> -
> - mutex_lock(&chip->lock);
> -
> - ret = lp5521_load_program(chip, pattern);
> - mutex_unlock(&chip->lock);
> -
> - if (ret) {
> - dev_err(dev, "lp5521 failed loading pattern\n");
> - return ret;
> - }
> -
> - return len;
> -fail:
> - dev_err(dev, "lp5521 wrong pattern format\n");
> - return -EINVAL;
> -}
> -
> -static ssize_t show_mode(struct device *dev,
> - struct device_attribute *attr,
> - char *buf)
> -{
> - struct lp5521_chip *chip = dev_get_drvdata(dev);
> -
> - return sprintf(buf, "%s\n", chip->mode);
> -}
> -
> -static ssize_t store_mode(struct device *dev,
> - struct device_attribute *attr,
> - const char *buf, size_t len)
> -{
> - struct lp5521_chip *chip = dev_get_drvdata(dev);
> -
> - mutex_lock(&chip->lock);
> -
> - if (!strncmp(buf, "run", 3))
> - lp5521_set_mode(chip, LP5521_MODE_RUN);
> - else if (!strncmp(buf, "load", 4))
> - lp5521_set_mode(chip, LP5521_MODE_LOAD);
> - else if (!strncmp(buf, "direct", 6))
> - lp5521_set_mode(chip, LP5521_MODE_DIRECT_CONTROL);
> -
> - mutex_unlock(&chip->lock);
> -
> - return len;
> -}
> -
> -static ssize_t show_current(struct device *dev,
> - struct device_attribute *attr,
> - char *buf)
> -{
> - struct i2c_client *client = to_i2c_client(dev);
> - int ret = 0;
> - u8 r_curr, g_curr, b_curr;
> -
> - ret |= lp5521_read(client, LP5521_REG_R_CNTRL, &r_curr);
> - ret |= lp5521_read(client, LP5521_REG_G_CNTRL, &g_curr);
> - ret |= lp5521_read(client, LP5521_REG_B_CNTRL, &b_curr);
> -
> - if (ret)
> - return ret;
> -
> - r_curr = r_curr >> 4;
> - g_curr = g_curr >> 4;
> - b_curr = b_curr >> 4;
> -
> - if (r_curr == g_curr && g_curr == b_curr)
> - return sprintf(buf, "%x\n", r_curr);
> - else
> - return sprintf(buf, "%x %x %x\n", r_curr, g_curr, b_curr);
> -}
> -
> -static ssize_t store_current(struct device *dev,
> - struct device_attribute *attr,
> - const char *buf, size_t len)
> -{
> - struct lp5521_chip *chip = dev_get_drvdata(dev);
> - struct i2c_client *client = chip->client;
> - int ret;
> - unsigned curr;
> -
> - ret = sscanf(buf, "%1x", &curr);
> - if (ret != 1)
> - return -EINVAL;
> -
> - /* current level is determined by the 4 upper bits, rest is ones */
> - curr = (curr << 4) | 0x0f;
> -
> - mutex_lock(&chip->lock);
> -
> - ret |= lp5521_write(client, LP5521_REG_R_CNTRL, (u8)curr);
> - ret |= lp5521_write(client, LP5521_REG_G_CNTRL, (u8)curr);
> - ret |= lp5521_write(client, LP5521_REG_B_CNTRL, (u8)curr);
> -
> - mutex_unlock(&chip->lock);
> -
> - return len;
> -}
> -
> -static DEVICE_ATTR(color, S_IRUGO | S_IWUGO, show_color, store_color);
> -static DEVICE_ATTR(load, S_IWUGO, NULL, store_load);
> -static DEVICE_ATTR(mode, S_IRUGO | S_IWUGO, show_mode, store_mode);
> -static DEVICE_ATTR(active_channels, S_IRUGO | S_IWUGO,
> - show_active_channels, store_active_channels);
> -static DEVICE_ATTR(led_current, S_IRUGO | S_IWUGO, show_current, store_current);
> -
> -static int lp5521_register_sysfs(struct i2c_client *client)
> -{
> - struct device *dev = &client->dev;
> - int ret;
> -
> - ret = device_create_file(dev, &dev_attr_color);
> - if (ret)
> - goto fail1;
> - ret = device_create_file(dev, &dev_attr_load);
> - if (ret)
> - goto fail2;
> - ret = device_create_file(dev, &dev_attr_active_channels);
> - if (ret)
> - goto fail3;
> - ret = device_create_file(dev, &dev_attr_mode);
> - if (ret)
> - goto fail4;
> - ret = device_create_file(dev, &dev_attr_led_current);
> - if (ret)
> - goto fail5;
> - return 0;
> -
> -fail5:
> - device_remove_file(dev, &dev_attr_mode);
> -fail4:
> - device_remove_file(dev, &dev_attr_active_channels);
> -fail3:
> - device_remove_file(dev, &dev_attr_load);
> -fail2:
> - device_remove_file(dev, &dev_attr_color);
> -fail1:
> - return ret;
> -}
> -
> -static void lp5521_unregister_sysfs(struct i2c_client *client)
> -{
> - struct lp5521_chip *chip = i2c_get_clientdata(client);
> - struct device *dev = &client->dev;
> -
> - device_remove_file(dev, &dev_attr_led_current);
> - device_remove_file(dev, &dev_attr_mode);
> - device_remove_file(dev, &dev_attr_active_channels);
> - device_remove_file(dev, &dev_attr_color);
> -
> - if (!strcmp(chip->mode, LP5521_MODE_LOAD))
> - device_remove_file(dev, &dev_attr_load);
> -}
> -
> -/*--------------------------------------------------------------*/
> -/* Set chip operating mode */
> -/*--------------------------------------------------------------*/
> -
> -static int lp5521_set_mode(struct lp5521_chip *chip, char *mode)
> -{
> - struct i2c_client *client = chip->client ;
> - int ret = 0;
> -
> - /* if in that mode already do nothing, except for run */
> - if (!strcmp(mode, chip->mode) && strcmp(mode, LP5521_MODE_RUN))
> - return 0;
> -
> - if (!strcmp(mode, LP5521_MODE_RUN))
> - ret = lp5521_run_program(chip);
> -
> - if (!strcmp(mode, LP5521_MODE_LOAD))
> - ret |= lp5521_write(client, LP5521_REG_OP_MODE, 0x15);
> -
> - if (!strcmp(mode, LP5521_MODE_DIRECT_CONTROL))
> - ret |= lp5521_write(client, LP5521_REG_OP_MODE, 0x3F);
> -
> - chip->mode = mode;
> -
> - return ret;
> -}
> -
> -/*--------------------------------------------------------------*/
> -/* Probe, Attach, Remove */
> -/*--------------------------------------------------------------*/
> -static struct i2c_driver lp5521_driver;
> -
> -static int lp5521_probe(struct i2c_client *client,
> - const struct i2c_device_id *id)
> -{
> - struct lp5521_chip *chip;
> - int ret = 0;
> -
> - chip = kzalloc(sizeof(*chip), GFP_KERNEL);
> - if (!chip)
> - return -ENOMEM;
> -
> - chip->client = client;
> - strncpy(client->name, LP5521_DRIVER_NAME, I2C_NAME_SIZE);
> - i2c_set_clientdata(client, chip);
> -
> - mutex_init(&chip->lock);
> -
> - ret = lp5521_configure(client);
> - if (ret < 0) {
> - dev_err(&client->dev, "lp5521 error configuring chip \n");
> - goto fail1;
> - }
> -
> - /* Set default values */
> - chip->mode = LP5521_MODE_DIRECT_CONTROL;
> - chip->red = 1;
> - chip->green = 1;
> - chip->blue = 1;
> -
> - ret = lp5521_register_sysfs(client);
> - if (ret)
> - dev_err(&client->dev, "lp5521 registering sysfs failed \n");
> -
> - return ret;
> -
> -fail1:
> - kfree(chip);
> - return ret;
> -}
> -
> -static int lp5521_remove(struct i2c_client *client)
> -{
> - struct lp5521_chip *chip = i2c_get_clientdata(client);
> -
> - lp5521_unregister_sysfs(client);
> - kfree(chip);
> -
> - return 0;
> -}
> -
> -static const struct i2c_device_id lp5521_id[] = {
> - { LP5521_DRIVER_NAME, 0},
> - { },
> -};
> -MODULE_DEVICE_TABLE(i2c, lp5521_id);
> -
> -static struct i2c_driver lp5521_driver = {
> - .driver = {
> - .name = LP5521_DRIVER_NAME,
> - },
> - .probe = lp5521_probe,
> - .remove = __devexit_p(lp5521_remove),
> - .id_table = lp5521_id,
> -};
> -
> -static int __init lp5521_init(void)
> -{
> - return i2c_add_driver(&lp5521_driver);
> -}
> -
> -static void __exit lp5521_exit(void)
> -{
> - i2c_del_driver(&lp5521_driver);
> -}
> -
> -MODULE_AUTHOR("Mathias Nyman <mathias.nyman@xxxxxxxxx>");
> -MODULE_DESCRIPTION("lp5521 LED driver");
> -MODULE_LICENSE("GPL");
> -
> -module_init(lp5521_init);
> -module_exit(lp5521_exit);
> --
> 1.6.1.3
>
> --
> balbi
> --
> To unsubscribe from this list: send the line "unsubscribe linux-omap" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
